How to attach shower spout to CPVC wall?
The spouts clamp onto the CPVC that comes through the tub wall via an allen head screw. Last night we opened the wall in one of the units, braced the shower valve and pipe from the spout with 2X4.
How do you install a shower spout?
Then for the shower you use the supplied arm and for the spout you can use a galvanized nipple of the proper length. Then screw on the spout. Some spouts are made with o-ring seals that slip over copper tube and are held in place with a set screw.
How to keep copper and steel apart in a bathtub?
The symptom was black water from the tub spout if it was not run every day. If you want to save money and not buy a union to keep copper and steel separated, at least use a plastic coupling or nipple where the two must connect so the metals do not touch. Log in or create an account to post a comment.
Can you use PVC glue in plumbing?
Can you use PVC for a shower drain?
Can you glue CPVC to brass?
About this website
What kind of pipe do you use for a tub spout?
Galvanized pipe is often used when a threaded pipe is required, since it's a bit more durable than copper. Copper is a softer metal, and may not hold up as well against the potential abuse the spout could see.
Can a tub spout be PEX?
I gather that 1/2″ PEX isn't suitable to connect a tub/shower valve to the tub spout because the internal diameter of the PEX and especially its fitting is too restrictive, which will cause the shower to dribble while using the tub spout.
What are bathtub spouts made of?
Brass is a solid bet for bathroom fixtures, as all-brass faucet bodies last for many years. They're also unlikely to leak or corrode.
Can you use PVC in a shower?
PVC Panels are water proof and the joints are water resistant. PVC panels can be used in areas like kitchens and bathrooms that may get wet often.
Can I use CPVC for tub spout?
If you want to use it for your tub and shower drain, you can. CPVC can be used for water supply lines, and you can use it for the connection between the shower valve and the shower spout. However, you should not use CPVC for the connection between the valve and the tub spout.
Can you use a drop ear elbow for a tub spout?
Drop Ear Elbows allow to transition between PEX pipe and threaded pipe, Such as shower arms, Show jets, Tub spouts, etc.
Which tub spout is best?
Best Bathtub FaucetsAmerican Standard Slip-on Diverter Tub Spout.Delta Faucet RP17453 Tub Spout.Kingston Brass KS266C Tub Faucet.My PlumbingStuff B3100 Clawfoot Tub Faucet.Moen 3931 Tub Diverter Spout.Danco Universal Tub Spout.Westbrass E531D-1F Tub Spout.Delta Faucet U1072-PK Diverter Tub Spout.More items...•
How far should tub spout stick out?
According to the installation manual for the spout, the nipple for the spout should be installed a min of 3/8" to a max of 3/4" past the finished wall.
How do you replace a bathtub spout?
5:488:47Replacing a Tub Faucet: Bathtub Spout Replacement - YouTubeYouTubeStart of suggested clipEnd of suggested clipThe copper to remove the old tub spout first loosen off the set screw this set screw uses a 5 32ndMoreThe copper to remove the old tub spout first loosen off the set screw this set screw uses a 5 32nd allen key once the set screw is loosened the tub spoke should slide. Straight. Off. One of the most
Is it OK to use PVC pipe for hot-water?
While PVC is excellent for water service lines and DWV applications, it's not recommended for hot-water distribution systems because it can only withstand temperatures up to 140℉. CPVC and PEX, however, can withstand temperatures up to 200℉. Most water heaters are set to heat water to no more than 140℉.
Can you use PVC for indoor plumbing?
Anything hotter than 140 degrees will melt the material. To give you a point of reference, the maximum temperature of hot-water heaters is usually between 120-140 F. Therefore, PVC can't really be considered a safe material in indoor plumbing.
Can you use PVC for bathroom plumbing?
It's called cellular PVC. It passes most codes and may work for you in your new room addition bathroom. Be sure to clear this first with your local plumbing inspector. Give SDR-35 PVC a good look for the outside drain lines you want to install.
How do you install a PEX tub spout?
0:271:58How to Connect Pex Plumbing to a Bathtub Faucet : Plumbing RepairYouTubeStart of suggested clipEnd of suggested clipSlide it onto the pecs. Then put our elbow on there. And we'll go ahead and crimp that into placeMoreSlide it onto the pecs. Then put our elbow on there. And we'll go ahead and crimp that into place after that's crimped into place you want to go ahead and attach it to your studs.
Can you use PEX for bathroom faucet?
PEX has several advantages over traditional copper pipes: it costs less to manufacture and is simpler to cut and connect. It also resists rust and corrosion and can carry hot or cold water to sinks, showers, toilets and many other fixtures.
Can you use SharkBite for shower valve?
Connect SharkBite to Shower Valve All you need to do next is push the SharkBite connections into the shower valve on one side of the fitting and push the PEX water supply lines to the other side. The insertion depth mark should line up with the top of the SharkBite fitting when the pipe has been inserted properly.
How do you convert PEX to copper?
0:091:41Connecting PEX Tubing to Copper Pipe - YouTubeYouTubeStart of suggested clipEnd of suggested clipThe fastest and easiest way to connect PEX directly to copper pipe is by using sharkbite connectionsMoreThe fastest and easiest way to connect PEX directly to copper pipe is by using sharkbite connections. These connections require no tools and no soldering.
Tub Spout installed on Plastic Pipe - Plbg.com
Re: Tub Spout installed on Plastic Pipe; Author: North Carolina Plumber (NC) Plastic pipe is not suppose to be used down to the spout when there is also a showerhead. The pipe restricts the water and it can back up and come out of the showerhead when you are using the spout to fill the tub.
chassis Engineer
Can PVC schedule 40 be used for a threaded tub spout nipple? I have been struggling to stop leaks coming from a copper nipple that I made from sweat fittings and 1/2" copper pipe. I believe I have traced the leaks to damaged (prior to my purchasing) male threads on the copper male adapter.
hj Master Plumber
Not a good idea. The plastic could snap if you hit or grab the spout. Use the proper length brass nipple, or two short nipples and a coupling if you have a problem with the exact length, and you don't have to worry about leaks.
chassis Engineer
It worked! Thanks guys. I used a brass 4" + 2 1/2" + coupling to create a good stub out.
Can you use PVC glue in plumbing?
PVC is not used for indoor plumbing. It cannot take the heat of heated water. CPVC is approved and will work as well as all of the PEX products. If you use the CPVC glue dry time is 4 to 6 hours.
Can you use PVC for a shower drain?
PVC can be used only for drain lines (including indoors, despite what the answer below says). If you want to use it for your tub and shower drain, you can.
Can you glue CPVC to brass?
You'll also want to make sure your valve accepts CPVC connections. If it has brass or Pex connections, you'll need to use an adapter; you can only glue CPVC to CPVC.
