What is Zinsser bin?
Zinsser BIN is a white-pigmented, shellac-based primer that seals surfaces to keep sap and tannin from bleeding into paint when painting wood. BIN is what I use the most for priming kitchen cabinets and tough stains on drywall. This product can also be used for minor spot priming outside (wood knots, sap stains, nail rust, etc.).
Can I use Zinsser bin primer on cabinets?
I use Zinsser BIN primer on cabinets and for spot priming, and I do recommend the primer for spraying. The aerosol cans come in handy too when you need to do quick spot priming before painting. Brushing this stuff is extremely messy because the consistency is so thin.
Is Zinsser bin high performance paint good?
The high performance does come with the odd frustration though unfortunately. Firstly, Zinsser BIN is obviously available as a paint, that is straight forward enough. You can also buy it in aerosol form which is very handy for spot priming stains or tackling smaller areas.
What is bin primer used for?
Zinsser BIN is a white pigmented, shellac-based primer that seals surfaces to keep sap and tannin from bleeding into paint when painting wood. BIN is what I use the most for priming kitchen cabinets and tough stains on drywall. This product can also be used for minor spot priming outside (wood knots, sap stains, nail rust).
What Is Zinsser BIN Primer Sealer?
How much does shellac cost at Sherwin Williams?
Why does my primer have fish eye?
What is the best cleaner for a sprayer?
How long does shellac take to dry?
Why don't I brush and roll bin?
How long does it take for a kitchen cabinet to recoat?
See 2 more
Is Zinsser a bin exterior?
B-I-N® is the ultimate shellac-based primer, sealer and stain killer. It is perfect for use on interior surfaces and spot priming of exterior surfaces.
Is Zinsser BIN waterproof?
The #1 in Problem Solving Products – Zinsser Paints Zinsser Watertite Mould and Mildew Proof Waterproofing Paint (pictured), also contains a biocide to protect against mould for a minimum of 5 years which can be applied to wet or dry surfaces. Zinsser B-I-N: The ultimate shellac-based primer, sealer and stain killer.
Is shellac primer good for exterior?
The shellac based primer is the most durable and provides the best adhesion. However, it is not recommended for exterior use, and clean up is more challenging.
Can I use Zinsser on exterior wood?
Zinsser AllCoat ® Exterior is an ultimate performance, mould resistant paint that offers supreme protection to all exterior surfaces: wood, metal, masonry, plastic, concrete and cladding. It forms a vapour-permeable, low maintenance, water-shedding coating that is recoatable in 1 hour.
Which is the best waterproof paint for exterior walls?
Which Paint is Best for Outside Wall in India?Berger Weather Coat Anti Dust Paint. ... 4 Paint Emulsion Nerolac. ... 5 Dr Fix It Raincoat. ... 6 Ace by Asian Paints. ... 7 Asian Paints Apex Weatherproof Paint. ... Dulux Weather Shield Max. ... Indigo Exterior Emulsion Paint. ... Nippon Exterior Paint. This is one of the best exterior paints.More items...•
What is the difference between Zinsser 123 and Zinsser BIN?
Zinsser Cover Stain provides durability and adhesion on glossy glossy surfaces. It's especially good on raw wood or MDF removing the risk of swelling that you could get with the water based 123 primer. Zinsser BIN is the toughest with the highest adhesion although it does have the highest price tag.
Can you use Zinsser primer outside?
Interior and exterior, water-based, primer / sealer. Adheres to all surfaces without sanding. Blocks stains, permanently sealing graffiti, grease spots, tar and asphalt, indoors and out.
Which primer is best for outside?
What is the Best Exterior Primer for My House?Acrylic Primer: Acrylic primer, or latex primer, has become the standard and is used much more frequently than its oil-based alternative. ... Alkyd Primer: Alkyd primer, or oil-based primer, has become less common, but does still have its place.More items...•
Which is best primer for exterior?
Berger Damp Shield Elasto Acrylic Primer. ... NATURELITE Paints EC Primer Acrylic Primer (4 L) Pack of 2 Acryli... ... Berger WeatherCoat Exterior Primer Acrylic Primer. ... Berger Home Shield Dampstop High Build Primer. ... Naturelite Paints NP Primer Exterior Acrylic Primer. ... Asian Paints Trucare wood primer 1 ltr Oil Primer.More items...
What is the best treatment for wood outside?
Wood oil. Penetrating deep into the wood grain to replace the essential oils lost through weathering, wood oils nourish and seal the surface protecting the timber from the inside out. ... Wood stain and dye. ... Wood preserver. ... Wood varnish. ... Wood paint.
What is best to protect wood outside?
Use an outdoor-rated finish like polyurethane, epoxy, lacquer, or varnish. Make a natural oil finish with one part tung or linseed oil, one part mineral spirits, and one part polyurethane. Use a stain sealant combo that gives your wood some color and a durable finish all in one.
Do you need a special primer for exterior wood?
The best interior paint primer to use depends on the surface you're painting and what type of paint you're using. Exterior primers are more durable than interior, so the best exterior primer to use is the one that protects surfaces from mildew and minimizes cracking and erosion.
Is Zinsser shellac waterproof?
Shellac, just as many other finishes, is not waterproof, however, it is quite water resistant. Shellac can easily withstand water for about 4 hours. Even if the surface is not wiped, the resulting faint white stain will still fade away as it dries.
How can I make my storage bin waterproof?
Seal Each Bin with Rubber Strips It may be easy for water to seep in at the crevices between the lid and the bin. To further secure each heavy duty plastic storage bin, consider adding a rubber strip to the top of bin where the lid attaches. There are plenty of rubber strip seals that are easy to install.
Will Zinsser stop damp?
For area's that are showing signs of damp or mould, we would recommend treating them with Zinsser Mould Killer & Remover which has an effective fungicide.
Can you paint straight over Zinsser BIN?
B-I-N®, developed in 1946, is the original shellac-based white-pigmented primer-sealer stain-killer. Great for use on all interior surfaces & spot priming on exterior surfaces. It is formulated to seal, prime and block out stains on previously painted or new work. Any oil or latex paint can be applied over it.
What is Zinsser Bin?
By Mike Gregory. Zinsser BIN is the industry leader in shellac-based primers. You wouldn’t use it as a finish coat, more of a problem-solving product before overpainting with something else. Zinsser BIN is a stain block, adhesion primer and barrier coat all in one. With a drying time of 15 minutes and re-coat in 45 minutes.
Why use shellac primer over oil?
Because the drying time is so short, you are not held up and you can crack on with the rest of the decorating work. The only products more effective than BIN are oil-based, so drying time can be a real pain. This is another reason to stick with a shellac based primer over oil. It is great for knot bleeds on timber too!!
How long does it take for a cover stain to dry?
Cover stain is an oil-based product, rather than shellac. Drying time is roughly 30 minutes and you can recoat after 2 hours. You can use it to block stains, or as an adhesion primer on most substrates. You’ll find it easier to use than BIN and it won’t ruin your brushes. The finish is flatter too.
Is there a brush restorer?
There is also a brush restorer. I’d recommend getting this, simply because it is cheap, and you’ll have a much better experience with Zinsser BIN if you swill your brush out every half an hour or so. Still, stick to cheap brushes when you use it.
Is Zinsser Bin good for painting?
Yes, Zinsser BIN is a wonder product in so many circumstances. It is a pain in the backside too!! It is difficult to keep a wet edge when painting for a period of time. It wrecks your brushes too, and it can be awkward to apply. Don’t get me wrong, I do love it and I use it regularly. The high performance does come with the odd frustration though unfortunately.
Can you use Zinsser bin on porous surfaces?
Apparently you can use Zinsser BIN on very porous surfaces as part of your prep. I have no doubt you could, but I’m unsure why you would. There are much easier products out there to use depending on your substrate. One thing I do use Zinsser BIN for is as a barrier between a thick bead of caulk and emulsion. It acts as a barrier and prevents moisture penetrating the caulk and expanding it, therefore stops the emulsion from cracking when the caulk contracts again.
Does Zinsser Bin stick to nails?
As mentioned, Zinsser BIN does stick solid to most things. In fact, it is even used as a base coat for ladies (or some gentlemen’s) fingernails before applying nail varnish!! You can use Zinsser BIN to prime glass, ceramic tiles, glossy surfaces, wood and metal.
What Is Zinsser BIN Primer Sealer?
Zinsser BIN is a white-pigmented, shellac-based primer that seals surfaces to keep sap and tannin from bleeding into paint when painting wood. BIN is what I use the most for priming kitchen cabinets and tough stains on drywall. This product can also be used for minor spot priming outside (wood knots, sap stains, nail rust, etc.).
How much does shellac cost at Sherwin Williams?
The first difference is the cost. The white shellac from Sherwin Williams is $60 per gallon at full retail price. However, you can get a discounted in-store price by signing up for their free Paint Perks benefits.
Why does my primer have fish eye?
Answer: The fish eye likely happened because there was a contaminant on the surface that you primed with Cover Stain. You didn't mention if you cleaned the surface or not. You can try cleaning the surface with a surface prep cleaner, or denatured alcohol, then apply another coat of your primer. Make sure you're following the air temperature and RH specs for the primer too. Most fisheye is caused by surface contaminants.
What is the best cleaner for a sprayer?
Shellac cleans up with denatured alcohol or ammonia. I find ammonia to work the best for cleaning, especially for a sprayer. Ammonia is cheaper too. The disadvantage is the horrible vapor. Oil primer cleans up with mineral spirits, which smells bad too.
How long does shellac take to dry?
But since pigmented shellac dries faster, the smell doesn't linger as long. The dry time is only 45 minutes.
Why don't I brush and roll bin?
I never brush and roll BIN because it's horribly messy. For that reason, I only use it with my sprayer, or the spray can. The material is the consistency of milk, spattering all over the place if a brush or roller is used. Oil primer is messy too, but it's the better option for brushwork.
How long does it take for a kitchen cabinet to recoat?
Answer: The recoat time is only 45 minutes, which is one of the reasons I love using this product for kitchen cabinet priming. The recoat time also depends on air temperature. If it's cold or humid in the room, it might take longer to dry fully.
What Is Zinsser Bin Primer Sealer?
Bin vs. Sherwin Williams White-Pigmented Shellac Primer
- The white-pigmented shellac primer from Sherwin Williams is almost exactly the same as BIN, but in my experience, there are a few differences. The first difference is the cost. The white shellac from Sherwin Williams is $70 per gallon at full retail price. However, you can get a discounted in-store price by signing up for their free Paint Perks benefits. A gallon of BIN is $50 per gallon. Fo…
Is It Worth The Price?
- I use Zinsser BIN primeron cabinets and for spot priming, and I do recommend the primer for spraying. The aerosol cans come in handy too when you need to do quick spot priming before painting. Brushing this stuff is extremely messy because the consistency is so thin. I only spray this product. The primer lays out exceptionally well and won't sag easily because it dries fast. I c…
Questions & Answers
- Question:When is it okay to use the water-based version of BIN primer? Answer:It depends what you're priming. I have only used the shellac BIN, so I can't comment on the water-based version, but I'd be hesitant to rely on it to cover tough stains. Shellac is best for that, but for minor stains, or as a primer coat for a major color change, it might be fine. For tough stains and sealing raw w…
Comments
- Brianon July 18, 2020: I have applied BIN over CAT pee rotted pressure treated 2x4 were the base boards go. I took as much rot out as i could but the 2x4 stil looks soft and black . I dont think it can dry out anymore, it looks like soft rot. Well, i primed over it anyway to kill the odor, do you see any harm in what I did? Did I block in the decay? Or the chance of really drying out more? Matt G…