The fluorescent fixture you have is intended to be hard-wired, so I'm not sure you'll be able to find an adapter for that quick-connect fitting you show, which are designed to wire several fixtures together. If you want to add a plug I think you'll have to cut the wire and splice in a new replacement cord.
How do you attach a plug to a fluorescent light?
Be sure to securely wrap the wires around the terminal screws of the plug so they do not come into contact with the other wires, or the cord will short-circuit. Attaching a plug to a fluorescent light fixture will allow it to be used in different locations.
Why are fluorescent lights wired to a plug?
These characteristics make fluorescent lights popular choices for many indoor applications, including growing plants and lighting workshops. Having the fixture wired to a plug will allow it to be moved to where the light is needed, and used anywhere there is an electrical socket.
How do you convert a hard wire light fixture to plug-in?
How to convert a hard wire light fixture into a plug in. Step One: Prepare your light fixture and gather your supplies. Step Two: Remove the female end of the extension cord using wire cutters. The female end is the plug in side…where another plug is inserted. (Now you know why its called female lol)
How do you install hardwired lights?
I have a whole round up of great hardwired lights ranging from $25-$50. Step One: Prepare your light fixture and gather your supplies. Step Two: Remove the female end of the extension cord using wire cutters. The female end is the plug in side…where another plug is inserted.
Can you wire lights to a plug?
Yes, you can. You must make sure at the lamp end that the flex is securely gripped by a suitable cable gland or other strain relief to prevent the cable being tugged out and exposing live wires.
How do you power a fluorescent light bulb?
0:1810:02How a Fluorescent Lamp Turns On - YouTubeYouTubeStart of suggested clipEnd of suggested clipYou. Know what this never handle live loose wires. Always turn off the breaker. Make all yourMoreYou. Know what this never handle live loose wires. Always turn off the breaker. Make all your connections. And then turn the breaker on.
How do you wire a fluorescent light socket?
1:303:49How to wire up a Fluorescent light circuit - YouTubeYouTubeStart of suggested clipEnd of suggested clipAnd goes directly onto the first pin off our left filament the neutral comes in and touches.MoreAnd goes directly onto the first pin off our left filament the neutral comes in and touches. Straight on to our right filament. And then between the other two terminals we place our starter.
Can you run a fluorescent light without a ballast?
If the existing fluorescent tube fixture you want to replace has a non-shunted tombstone, you can proceed with the ballast bypass procedure. Nonetheless, if the existing fixture offers a shunted tombstone, you should replace it with a non-shunted variant.
How do you wire a fluorescent light without a ballast?
0:522:27How to Bypass a Ballast - YouTubeYouTubeStart of suggested clipEnd of suggested clipFirst disconnect the hot neutral. And ground wires that are connected to the ballast. Then cut allMoreFirst disconnect the hot neutral. And ground wires that are connected to the ballast. Then cut all the wires leading from the ballast to the lamp sockets.
What is the blue wire in a fluorescent light fixture?
One of the white wires is the white wire to the ballast and the other white wire is connected to the white supply wire. The blue wire is the blue wire to the ballast. The right tombstone has two red wires (one in each socket) and they lead to the other side of the ballast.
Can you put LED tubes in a fluorescent fixture?
In short, YES! New linear LED tube bulbs are simple plug-and-play and ballast compatible. You will simply need to remove your fluorescent bulb and plug in your LED light replacement.
How do I change my fluorescent light to LED?
3:4410:42How to easily convert fluorescent Lights to LED – UPDATED! - YouTubeYouTubeStart of suggested clipEnd of suggested clipWe pop in the led light tube. And we see that it works now here we have an led fixture this isMoreWe pop in the led light tube. And we see that it works now here we have an led fixture this is actually the fixture from the first. Video. It's been converted. And it uses a single ended connection.
How do fluorescent light starters work?
Simply put, fluorescent starters are a timed switch. The switch opens and closes until the fluorescent tube 'strikes' and lights-up. If the fluorescent tube does not light, the switch repeats it's open/close cycle and the fluorescent tubes attempts to ignite again.
How do fluorescent lights work simple?
Fluorescent lamps work by ionizing mercury vapor in a glass tube. This causes electrons in the gas to emit photons at UV frequencies. The UV light is converted into standard visible light using a phosphor coating on the inside of the tube.
How does fluorescent light ballast work?
In a fluorescent lighting system, the ballast regulates the current to the lamps and provides sufficient voltage to start the lamps. Without a ballast to limit its current, a fluorescent lamp connected directly to a high voltage power source would rapidly and uncontrollably increase its current draw.
What is fluorescence and how does it work?
Fluorescence is the emission of light by a substance that has absorbed light or other electromagnetic radiation. It is a form of luminescence. In most cases, the emitted light has a longer wavelength, and therefore a lower photon energy, than the absorbed radiation.
What is a clamp for fluorescent lights?
The clamp is a great idea if the edge of the hole in the fixture is sharp. The fluorescent fixture you have is intended to be hard-wired, so I'm not sure you'll be able to find an adapter for that quick-connect fitting you show, which are designed to wire several fixtures together.
What wire goes to black and white?
Black goes to black and white to white. Be sure to use a three prong cord with a ground wire , like this: Secure the green wire to the fixture's metal with a screw (maybe one already in place), or cut the end of the wire, strip it, and use a twist connector to tie it to a ground wire in the fixture.
How many bulbs does a T8 light fixture hold?
I am looking to connect a T8 fluorescent light fixture (that holds 4 bulbs) to a cord with a plug at the end so I can plug the fixture directly into a standard wall socket (or in my case a light socket adapter like this one .)
What is the yellow connector on a power cord?
The yellow connector can be used for connecting to power cord. If hard wiring, you would simply strip the proper amount of insulation from the solid conductors and push in the holes to connect. If the connector is like the Ideal #102 (same idea, different mfg) you can even use the stranded wires from the power cord, just twist them and tin them with solder. Look up the specific yellow connector that came with the fixture to be sure it is approved for stranded wire first.
Can you use stranded wires on a power cord?
If the connector is like the Ideal #102 (same idea, different mfg) you can even use the stranded wires from the power cord, just twist them and tin them with solder.
Can you hard wire fluorescent lights?
The fluorescent fixture you have is intended to be hard-wired, so I'm not sure you'll be able to find an adapter for that quick-connect fitting you show, which are designed to wire several fixtures together. If you want to add a plug I think you'll have to cut the wire and splice in a new replacement cord. There should be a circular knock-out at the top of the fixture that you can use to get the wiring into the fixture. Make sure you use an appropriate cable clamp connector.
How to connect a cord to a lamp?
Insert the end of the cord through the ROMEX® connector, allowing enough cord to make the connections to the fixture. Tighten the clamping screws on the ROMEX® connector to secure the wire. The type of cord used for this project depends on its intended application. Standard lamp cords do not have grounds but will work. For added safety and especially around wet areas, use a cord and plug that have a ground. A construction extension cord is ideal. Just cut off the receiving end of the cord with the long nose side-cutting pliers.
Where are the knockout plugs on fluorescent lights?
Standard fluorescent strip fixtures usually have knockout plugs located on each end as well as the back of the fixture. Use a pair of long nose side-cutting pliers to punch out and then twist the knockout until it breaks free of the fixture. Video of the Day.
How to install a Romex connector?
Insert a 3/8-inch ROMEX® connector into the knockout hole. Secure the ROMEX® connector to the fixture with a lock nut. Tighten the lock nut with the pair of needle-nosed pliers or by tapping it with a flat head screwdriver and hammer.
Can you use a cord on an old vacuum cleaner?
Use a cord from an old vacuum cleaner or other type of appliance to save money. It is acceptable to use a non-grounded cord/plug in applications where the fixture is out of reach and away from wet areas.
Can you plug in fluorescent lights?
Adding a plug to a fluor escent light strip fixture is an inexpensive and easy do-it-yourself project. It adds versatility to the fixture as it is easy to relocate. Fluorescent light strips are sold in lengths up to 8 feet in most cases. Fluorescent fixtures are designed for hardwire applications or for a cord and plug. Adapted fixtures mount directly to the ceiling or from hanging chains.
Outside light to a plug socket
No matter how handy you are with electronics, there are some things that you need to involve professionals. One of these is wiring an outside light into a socket, and this turns out to be more complicated than it looks. The basic principle is straightforward. You should wire and plug with a flex and then a plug socket.
How to fit outdoor lights
When you think of outdoor lighting, you probably think of floodlights. A powerful lamp brightly illuminates them, and they direct their light downward.
Best Outdoor Lights
There used to be a lot of competition between outdoor lights. There were halogen spotlights, fluorescent floodlights, and standard incandescent lights. But these days, most outdoor lights are designed to work together rather than compete. Most new lights take advantage of a new technology called “LED” or “light-emitting diode”.
How Will You Wire Outdoor Lights?
One consideration when thinking about outdoor wiring lights is placement. We recommend spotlights for patios, and other ground-level paths, which can be flush mounted to the ground or mounted on posts to illuminate the path ahead. We also recommend floodlights for areas such as a driveway or walkway that see a lot of traffic.
Transformers- Timers in Disguise
With all the features of a standard transformer, these photocell/timer-based transformers go one step further. They transform your lights to work like timers. Easy to install, they can light anything that works with traditional transformers.
A Flick of a Switch
Wiring outdoor lights to an interior light switch is something no one thinks about until they do. And when they do, it leads to “A Flick of a switch” and the flood of light that accompanies it. Transform your outdoor lighting installation into a whole new (literal) level of enjoyment with this wiring procedure.
Final Thoughts
Most outdoor lights illuminate the landscape. But landscape lighting can do more. It can accent architectural features, emphasize paths, driveways and highlight special plants. Landscape lighting makes your property safer, too. It illuminates dark areas of your yard. Outdoor lighting does more than a highlight. It creates an atmosphere.
Is an emergency fitting worth it?
An emergency fitting is worth way more than a normal fluoro anyway, just flog it to a sparks and get him to fit you a normal one - everyone's happy!
Can you run off a plug with twin and earth?
It isn't really suitable for running off a plug, twin and earth isn't made for plugs either!!
