No, the microwave brackets are not interchangeable as each is provided with a different mounting bracket which is not the same and they cannot be interchanged. Each over-the-range microwave is provided with the mounting hardware along with the templates, and the installation instructions which make your work of installation easy.
Full Answer
What should I look for when replacing an over-the-range microwave?
NOTE: When replacing an over-the-range microwave, the mounting bracket included with the new microwave should be used since the mounting bracket is specific to each model. The new screws, bolts, and exhaust adapter should also be used.
Are all mounting kits the same for an above-range microwave?
Are All Mounting Kits the Same for an Above-Range Microwave? Hunker may earn compensation through affiliate links in this story. All mounting kits are not the same. They are specifically designed by the manufacturer for the model. Mounting kits are provided when you purchase the above range microwave or you can purchase one separately.
Where can I find the bracket template for my ge microwave?
The bracket is removed from the microwave and is its own template, If you need a copy ahead of time, or a replacement template is needed, many models have the electronic version available on www.geappliances.com. These can be found on the model's product page under Manuals/Downloads.
What comes with each microwave?
Each microwave comes with the mounting hardware (mounting bracket, screws, exhaust adapter), top and rear templates, and installation instructions needed to make installation a simple process. This makes choosing a replacement microwave easy.
What is included in a microwave?
Can a 36" microwave be replaced?
Can a 30" microwave fit in a 36" cabinet?
About this website
Do all GE microwaves have the same mounting bracket?
All mounting kits are not the same. They are specifically designed by the manufacturer for the model. Mounting kits are provided when you purchase the above range microwave or you can purchase one separately. The kits must vary in their configuration to properly accommodate hanging the microwave securely.
Can you use old bracket for new microwave?
If you are installing the same type of microwave, you may be able to reuse the existing mounting bracket. However, in most cases, you will need to remove the existing bracket and install a new one that is specific to the new microwave.
What size are the mounting bolts for a GE microwave?
These bolts are 1/4"-28x3 1/4".
Do all over-the-range microwaves use the same bracket?
NOTE: When replacing an Over-the-Range microwave, the mounting bracket included with the new microwave should be used since the mounting bracket is specific to each model. The new screws, bolts and exhaust adapter should also be used.
How do you replace a microwave mount?
1:079:33How To Replace a Microwave - YouTubeYouTubeStart of suggested clipEnd of suggested clipYou're gonna tilt the top of the microwave away from the cabinet pulling the cord through at theMoreYou're gonna tilt the top of the microwave away from the cabinet pulling the cord through at the same time and simply lift it off the bracket. And remove it.
Is it difficult to replace an over-the-range microwave?
Installing an over-the-range microwave oven is often easier than you think. If you are simply replacing an existing vent hood or older microwave with a new oven, you can install it easily enough with common tools. You will need a helper for this one, as an extra set of hands is essential.
How do you open a microwave screw?
0:001:05How To Take Out Microwave Screws NO Special Tools - YouTubeYouTubeStart of suggested clipEnd of suggested clipSo as you can see with the security pin in there it doesn't work so all you need to do is just takeMoreSo as you can see with the security pin in there it doesn't work so all you need to do is just take a flathead screwdriver that's small enough to fit in between two of the teeth.
Are over-the-range microwaves universal?
If you look at all of the available variants of microwave ovens on the market in terms of width, height and depth, you'll see that there really are no standard sizes, but microwaves designed for over-the-range installation all fit into a 30-in. wide space.
How do you mount an over-the-range microwave without a template?
1:003:50Install over range microwave without template - YouTubeYouTubeStart of suggested clipEnd of suggested clipHopefully they're long enough two and a half inches to go through. Um this and reach the top of it.MoreHopefully they're long enough two and a half inches to go through. Um this and reach the top of it. And so now we're going to try to hang it. So take a look as we try to hang the microwave.
Are all over-the-range microwaves the same size?
Microwave sizes are fairly standardized with most over-the-range microwaves measuring around 30" wide, 17" high and 15" to 18" deep with the door closed. Built-in microwave sizes also tend to match standard cabinet dimensions.
Replacing an over-the range microwave without neending new mount
Best answer: I don't have an easy answer for you but I wanted to point out that your microwave may be hard-wired into a circuit and not just plugged into an outlet (I'm assuming here. You may have checked and know it has a plug.) If you aren't comfortable with doing some minor electrical work this wouldn't be a simple plug'n'play job, that goes extra if your hood vents to the outside.
Hi, what are the models that will replace GE JVM1 – Q&A – Best Buy
Hi, what are the models that will replace GE JVM1740SM1SS with same specs and bracket? Th – Learn about GE - 1.7 Cu. Ft. Over-the-Range Microwave - Stainless steel with 3 Answers – Best Buy
How to Replace an Over-the-Range Microwave | Lowe’s
Replacing your over the range microwave oven adds value to your home. Bring fresh style and cutting-edge features back to your kitchen with this how-to article.
Claims & Certifications
Connect to WiFi for real-time feedback, optimized performance, alerts and more.
For California Residents
Connect to WiFi for real-time feedback, optimized performance, alerts and more.
Can a microwave be mounted above an island?
Most above range microwaves can not be mounted above an island; the proper installation, to support the weight of the microwave, must include a cabinet and wall mounting. Ensure at least one of the screws on the rear is mounted in a stud.
Do you need a mounting kit for an above range microwave?
Mounting kits are provided when you purchase the above range microwave or you can purchase one separately. The kits must vary in their configuration to properly accommodate hanging the microwave securely.
Do microwaves have top support screws?
Most above range microwaves have top support screws. A hole is drilled underneath the cabinet to fit through the power cord. Another cutout is needed to allow enough room for the exhaust adaptor to fit through, if you are venting the microwave to the outside. Advertisement.
What is included in a microwave?
Each microwave comes with the mounting hardware (mounting bracket, screws, exhaust adapter), top and rear templates, and installation instructions needed to make installation a simple process. This makes choosing a replacement microwave easy.
Can a 36" microwave be replaced?
If you are replacing a 36" over-the-range microwave, many current 30" over-the-range microwaves offer an optional 36" filler kit to allow it to be installed in a 36" cut-out opening. If available, the filler kit will be listed in the product specifications. View all 36" filler kits.
Can a 30" microwave fit in a 36" cabinet?
All 30" over-the-range microwaves are approximately the same width, and are designed to fit into a 30" wide cabinet opening. Therefore, any of our 30" over-the-range models will work as a replacement for an existing 30" over-the-range model (see below for information on replacing a 36" model). Each microwave comes with the mounting hardware (mounting bracket, screws, exhaust adapter), top and rear templates, and installation instructions needed to make installation a simple process. This makes choosing a replacement microwave easy.
