What size hearth PAD do I need for a gas stove?
As a general rule of thumb, the hearth pad dimensions for a free-standing stove with no listed clearances over a combustible floor should be 36 inches in all directions from the edge of the stove. Unlisted stoves with a stove body that sits 2 inches or closer to the floor must only be installed on a non-combustible floor.
Will a non combustible hearth pad stop heat from passing through?
But some stoves produce enough heat directed down and forward that a Type 1 – Ember Protector won’t stop the heat from passing through to the floor beneath the stove. For today’s highly efficient stoves, a Hearth Classics non-combustible hearth pad will block the heat from passing through to your subfloor.
Do I need a hearth protector for my Stove?
Whether you’re burning gas, pellets, corn, coal, oil or wood, our hearth pads offer the best protection on the market - and they look great too. All wood, pellet, coal and corn stoves require a hearth protector.
What is a fireproof pad for a stove?
Hearth Pads. Hearth pads are sections of fireproof material that can be used underneath wood, pellet and gas stoves to protect floors from sparks and embers and on the back walls behind heating appliances to protect the walls from intense heat. Stove boards also lower the amount of clearances to combustible materials required between...
What is a hearth in a fireplace?
What is required for a gas fireplace?
What does "open front" mean in fireplace?
Why is a direct vent fireplace less onerous?
Is a direct vent fireplace a natural gas fireplace?
Can a fireplace insert be vented?
Do you need a hearth for a gas fireplace?
See 2 more
Does a gas stove need a hearth?
A gas fire is seen as an appliance, just like a fridge or a dishwasher. Therefore, if your home is fitted with a modern gas fire, you can forego the hearth, and have a wood, composite or laminate floor go right up to the base, unless the manufacturer's installation requirements ask otherwise.
Do you need a hearth in front of a gas fireplace?
However, natural vent gas fireplaces often require a hearth while direct vent and ventless versions may not, depending on the manufacturer requirements and local building codes and regulations.
Are hearths necessary?
Hearths serve a very important purpose as well as visually draw attention to the fireplace one of the key focal points in the room setting. Hearths essentially were created to serve a purpose rather than strictly as decoration. They make the fireplace area a safe place and also prevent fire hazards.
How big should a hearth be for a gas fireplace?
Hearth dimensions: A fireplace hearth should extend at least 16" (M.I.A.) past the front edge of the fireplace and at least 8" beyond each side of the fireplace opening.
What is code for a gas fireplace hearth?
Per California fireplace hearth dimensions code as published on UpCodes, if the firebox, or the opening of the fireplace, is less than 6 feet square, then the requirement is that the hearth must stick out at least 16 inches to the front and 8 inches on either side of the opening.
How far should a hearth come out from a gas fireplace?
So how far should a fireplace hearth come out? InterNACHI recommends that for fireplaces that have an opening of 6 square feet (0.56 square meters) or smaller, a hearth should extend at least 16 inches (406mm) out into the room from the opening, and by at least 8 inches (203mm) away from the sides.
What is the best material for a hearth?
The most common and best hearth material for a wood burning stove is stone, especially slate and granite. However, you will also find hearths made from glass and steel. These can withstand high temperatures without cracking or posing a fire hazard.
How much hearth is in front of a gas fire?
At least 150mm (6”) of hearth either side of the stove. At least 300mm (12”) of hearth in front of the stove. If the floor is combustible then the hearth must be at least 250mm* (10”) deep OR this can be reduced to 125mm (5”) deep if you have an air space or air gap of 50mm underneath.
Can a hearth be flush with the floor?
A flush hearth is level with the floor. Most fireplaces have flush hearths. A flush hearth uses fewer materials than a raised hearth and is less expensive to build than a raised hearth. It also saves you more space.
What do you put in front of a gas fireplace?
In Front of Your Gas Fireplace A hearth rug. Hearth rugs are flame-retardant and will anchor your entire fireplace design. For the best visual appeal, use a rug that is as long as the fireplace. Use the rug to tie in the decor of the room.
Is it OK to mount TV over gas fireplace?
In most cases, you should not install electronics above wood-burning stoves or gas fireplaces and inserts because they produce massive amounts of heat. That heat could severely damage your tv or other electronic devices.
Can a gas fireplace sit on the floor?
Since no actual combustion occurs in gas fireplaces, zero-clearance installation is possible, which, according to Monessen Hearth Systems, means that “these fireplaces can be installed in direct contact with combustible walls and floors.
What do you put in front of a gas fireplace?
In Front of Your Gas Fireplace A hearth rug. Hearth rugs are flame-retardant and will anchor your entire fireplace design. For the best visual appeal, use a rug that is as long as the fireplace. Use the rug to tie in the decor of the room.
How much hearth is in front of a gas fire?
At least 150mm (6”) of hearth either side of the stove. At least 300mm (12”) of hearth in front of the stove. If the floor is combustible then the hearth must be at least 250mm* (10”) deep OR this can be reduced to 125mm (5”) deep if you have an air space or air gap of 50mm underneath.
What is required for gas fireplace?
The standard building code is 6 inches of minimum clearance around the opening of the fireplace and it must be surrounded by a noncombustible material. However, if the mantel projects more than 1 1/2 inches from the face of the fireplace, the top noncombustible clearance must be at least 12 inches.
Can you have wood around a gas fireplace?
They can be set to display realistic flames with no heat or adjusted to add warmth to the room with radiant doors and fans. At either setting, the heat is not intense enough to pose a fire danger, so you can safely install wood trim around a gas-powered fireplace.
Requirements for a Gas Fireplace Hearth | Hunker
Gas fireplaces are a convenient heat source that is efficient and easy to use. Energy Star boasts that some gas fireplace units are at over 90 percent efficiency with little extra costs to operate. Like all fireplaces that give off heat, there are code requirements that have to be met, especially for the hearth.
What type of hearth pads are used for ember protection?
All of our traditional hearth pads are Type 2 only, providing both ember and thermal protection. Our steel Ember Defender pads are Type 1 only, providing ember protection only. All pads are tested and approved under UL1618 testing guidelines.
How thick are hearth pads?
How thick are your hearth pads? Original Edge framed hearth pads less than 54″ are 1″ thick (slates in these sizes vary from 1-1/8″ to 1-1/4″ thick), and all Original Edge frame hearth pads 54″ and larger, as well as all sizes in our Classic Edge framed pads, are 1 1/4″ thick (slates in these sizes vary from 1-3/8″ to 1-1/2″ thick).
Can you put a stove on carpet?
With our new Type 1 – steel Ember Defender and our Type 2 – traditional Ember and Thermal Protectors, the answer is YES. These pads have a solid bottom that will support a stove up to 450 lbs when installed on carpet. Stove weight is not an issue if you are installing on a level, flat floor.
Do you charge freight on a hearth pad?
No. We will provide an estimated freight charge on the Sales Order/Acknowledgement. We will invoice freight in addition to the hearth pad, or the order will ship freight collect, and the freight company will collect the cost of freight at the time of delivery or by invoicing you directly.
Can you make a hearth pad for a fireplace?
Yes, we can. We excel at custom work. Part of our factory and team of craftsmen are dedicated to making custom hearth pads. Your stove dealer will need to send us a drawing with all your required dimensions. Please keep in mind your pad cannot exceed 60″ in length or width. However, we can make extensions for use in front of a fireplace up to 72″ long, but no deeper than 22″. All of our pads are made using 45° and 90° angles.
What type of hearth pad is used for a wood stove?
Type 1 - Steel Hearth Pads. All wood, pellet, coal and corn stoves require a hearth protector. Most require only protection from falling embers. But some stoves produce enough heat directed down and forward that a Type 1 – Ember Protector won’t stop the heat from passing through to the floor beneath the stove. View Type 1 Hearth Pads.
What is a type 2 hearth pad?
Type 2 – Traditional Hearth Pads. For today’s highly efficient stoves, a Hearth Classics non-combustible hearth pad will block the heat from passing through to your subfloor. Fully non-combustible, with an R-value of 2.24 or 1.592 ( R-value information ), it provides protection well above the minimum requirements for Type 2 hearth pads ...
Does a hearth pad protect the floor?
With stoves burning cleaner and hotter than ever before, a traditional ember protector or homemade hearth may not protect the combustible floor beneath your stove. Building codes and safety standards now require the hearth pad to provide adequate thermal protection based on the stove model.
How far should a hearth pad be from the edge of a stove?
As a general rule of thumb, the hearth pad dimensions for a free-standing stove with no listed clearances over a combustible floor should be 36 inches in all directions from the edge of the stove.
How thick should a stove hearth pad be?
In general, the materials used for factory-built hearth pads are 12mm thick. If your stove generates temperatures higher than 212 °F, your pad must be significantly thicker.
What is a wood stove hearth made of?
A wood stove hearth or a stove board is made from a variety of fire-resistant materials. Options include things like concrete, slate, glass, limestone, or resin. Wallplates can also come in many materials including sheet metal.
What is a hearth board?
Stove boards (also known as hearth boards or hearth pads) offer protection and peace of mind. Don't risk ruining your floors or walls - or worse yet, a house fire! Most wood stoves require a protective hearth pad, but even if yours doesn't, you still might want to consider an added layer of protection.
How many inches of pad in front of stove door?
Code for solid-fuel, standalone appliances require at least 16 inches of a pad in front of the stove door and 8 inches on either side.
Why do stove boards come in different colors?
They come in several configurations so you can have the right protection in whatever installation you choose. They also come in many colors and styles so you don't have to sacrifice style for safety. If anything, the stove boards add to the aesthetic of the stove and make it look more grounded and complete.
What is a stove board made of?
Stove boards (i.e. hearth pads, heat shields, or hearth extensions) are made from non-combustible material like concrete, metal, tile, or ceramic glass. They are different from traditional floor rugs or hearth rugs that you might see in front of a fire.
What is a hearth in a fireplace?
Hearths are the platform on which fireplaces are placed to help protect the floor of a home.
What is required for a gas fireplace?
A gas fireplace may have requirements for both the hearth on which it sits (such as thickness) and the heath extension that protrudes out the front (such as minimum coverage area).
What does "open front" mean in fireplace?
An open front means that natural vent gas fireplace inserts typically require a more suitably sized hearth for safety reasons.
Why is a direct vent fireplace less onerous?
A direct vent gas fireplace can therefore have less onerous hearth requirements because they will have a glass front.
Is a direct vent fireplace a natural gas fireplace?
Direct vent gas fireplaces can come under the category of built-in gas fireplaces and differ to natural vent gas fireplaces in that both waste and clean air is vented externally.
Can a fireplace insert be vented?
They can commonly be found as inserts for installation into existing masonry fireplaces but may also be standalone units that need to be vented through the roof with a pipe.
Do you need a hearth for a gas fireplace?
The requirements for a hearth for a gas fireplace will typically come down to what is required by the manufacturer for that particular model of gas fireplace . However, natural vent gas fireplaces often require a hearth while direct vent and ventless versions may not, depending on the manufacturer requirements and local building codes and regulations.
