
How does a thermostatic radiator valve work on a boiler?
Thermostatic radiator valves work completely independently to the boiler and don't have any direct control on its operation. There is an indirect link - TRVs control the temperature of each room, and therefore have an effect on the temperature that's sensed by the wall thermostat.
What are the benefits of thermostatic radiator valves?
The main benefit of thermostatic radiator valves is that they automatically give you room temperature control, and they help you heat your property more efficiently, which saves you money on your heating bills – IF you set them up in the right way.
How does the radiator valve on a car work?
The distance between the valve seat and the valve cone determine how much water is flowing through the valve and to the radiator. The valve cone is operated by the thermostat, which senses change in the room temperature. This is possible due to the gas filled actuator inside the thermostat.
What are thermostatic radiator valves (TRVs)?
Thermostatic radiator valves (TRVs) are an easy and inexpensive way to separately control the air temperature of individual rooms in your home.

Is it worth getting thermostatic radiator valves?
Yes! Thermostatic valves are the best way of getting the heating in your home just right! Used in combination with a room thermostat, they adjust your heating perfectly, and you won't end up with some rooms being overheated.
Do thermostatic radiator valves save money?
TRVs can save you money because they allow you to heat your home more efficiently and in a smart way that is appropriate to each area of the home. For example, you may want to keep your living room toasty, have your bedroom cool and the baby's room warm and with TRVs you can do that accurately.
When should you use a thermostatic radiator valve?
Thermostatic radiator valves are commonly referred to as TRVs and are used to control the air temperature of different rooms – you will normally find them on the side of your radiators. TRVs are just one of a number of heating controls, which allow homeowners to heat their homes more efficiently.
Do thermostatic radiator valves fail?
If this is very stiff or catching, give it a little squirt of WD40 and work it a little until it slides freely. An annual check and squirt of WD40 is advisable to keep the TRV working efficiently. If you cannot get the plunger working again, then the valve has failed and will need to be replaced completely.
Is it OK to turn off radiators in unused rooms?
As long as you close the doors so the cold air doesn't seep into the rest of the house, you will save money by turning off the radiators in unused rooms. By doing so, you'll prevent the water in the system running through that particular radiator.
Do I need a smart TRV on every radiator?
We recommend installing Smart Radiator Thermostats in all rooms which you want to control intelligently. The areas where you spend most of your time, such as the living room, kitchen, dining room etc.
Should radiators be too hot to touch?
A too-hot radiator can also damage furniture, if the furniture is pressed up against it and while not an out and out fire hazard, flammable materials coming into contact with something very hot is not worth risking and is best avoided.
What temperature is 3 on a TRV?
19-20°CApproximate conversion into degrees CelsiusValve positionReference temperatureRecommended setting for2-318°CBedroom319-20°CKitchen3-420-21°CLounge, child's bedroom422°CBathroom5 more rows
How much does it cost to install thermostatic radiator valves UK?
How much will it cost? As part of an independent visit, we charge£140 + Vat to supply and replace your thermostatic radiator valves to the 1st radiator. And £50 + Vat for each additional radiator required. e.g. changing the radiator valves of three radiators would cost(£140 + £50 + £50 = £240 + Vat).
How long do thermostatic radiator valves last?
You should replace your thermostatic radiator valves (TRVs), or at least upgrade the TRV heads, if they are 10 or more years old. TRVs can decline in terms of performance and accuracy over time.
How do I change a TRV without draining the system?
3:2314:53How to Change a Thermostatic Radiator Valve Without Draining ...YouTubeStart of suggested clipEnd of suggested clipAnd turn it off so if you're doing this job with a combi boiler the next step for you will be toMoreAnd turn it off so if you're doing this job with a combi boiler the next step for you will be to release the pressure on the system with a radiator. Key or you can use a screwdriver.
Can you turn off a radiator without thermostatic valve?
Non-thermostatic valves Step 1: Also known as a manual valve, find the non-thermostatic valve on the left or right side at the bottom of your radiator. The other valve on the radiator will be fixed or will be capped. Step 2: To turn your radiator off, turn the valve clockwise as far as it will go.
How much money do smart radiator valves save?
The eqiva smart radiator valve claims that it can save you up to 30% on your heating bills, which would be higher than the 10-12% savings that Nest claim you'll have with their Learning Thermostat.
Does turning radiator valve down save money?
To save energy, you can try turning down the radiator valves in each room. If there are rooms in your home you don't use regularly, like a spare bedroom, you could turn the radiator off and close the door.
How much do you save turning down thermostat UK?
Energy experts at uSwitch suggest turning down your thermostat by just one degree could save you £80 each year on your heating bill. Research from the comparison site, first published in November, found two-thirds – or 17.7 million – of households are turning up their thermostats to more than 20°C.
Is it cheaper to leave heat on all day?
According to the U.S. Department of Energy, a family that sets back its thermostat by about 10 to 15 degrees for eight hours a day while sleeping or out of the house can save 5 to 15 percent a year on home heating costs.
What is a thermostatic radiator valve?
A thermostatic radiator valve is a type of radiator valve which is self-regulating, controlling the temperature of a room by altering the levels of hot water which are delivered to the radiator. This obviously offers a variety of benefits over manual radiator valves, as it allows rooms to be heated in the most efficient way possible ...
How do thermostatic valves work?
The fact that thermostatic valves work by sensing their surrounding air temperature means that it’s important to make sure that they are exposed to the air and are not covered by things like curtains or drying clothes.
How much CO2 does a thermostatic valve save?
According to one study, switching from a manually controlled valve to a thermostatic valve could save 280 kilograms of CO2 per year, and the fact that they only use heat when needed could reduce your heating bills by a whopping 17%.
What is a TRV valve?
The classic TRV contains a wax plug which expands or contracts according to the temperature of the air around it. This plug is connected to a pin, and this pin is connected to a valve; as the air temperature gradually increases, the wax gradually expands, and the valve gradually closes, which in turn limits the amount of hot water which enters ...
What is a thermostatic radiator valve?
A thermostatic radiator valve consists of two main components: the valve itself and a thermostat. The distance between the valve seat and the valve cone determine how much water is flowing through the valve and to the radiator. The valve cone is operated by the thermostat, which senses change in the room temperature.
How does a valve cone work?
The valve cone is operated by the thermostat, which senses change in the room temperature. This is possible due to the gas filled actuator inside the thermostat. Actuators filled with gas instead of liquid react very fast and more energy savings are earned.
How Much Does A Thermostatic Radiator Valve Cost?
A standard pair of TRVs will set you back about £20, whether you buy them from our store or decide to shop for them somewhere else.
Why does my radiator valve keep sticking?
The most common and regularly occurring problem with a thermostatic radiator valve is that the valve – or the head of the valve – begins to stick or catch. This will leave them open or closed and can happen when the setting on the valve has not been adjusted for some time – such as at the end of a long hot summer.
How Does A TRV Work?
A Thermostatic Radiator Valve is self-regulating and works by automatically changing the flow of hot water that comes into your radiator at any one time.
What Do The Numbers On A TRV Mean?
Contrary to popular belief, the numbers on your TRV do not represent specific room temperatures, because as I have mentioned, the temperature at which the valve operates depends on water temperature, the airflow around the valve, the size of the room and the heat loss in that space through walls, windows and floors.
Why does my radiator cover stop my TRV?
As in the image above, this radiator cover is arguably stopping the TRV from operating at its best, as it is blocking any draught or airflow to the valve, this could lead to the valve not operating correctly and the space not heating up as well as you may like.
What is a TRV?
Thermostatic Radiator Valves are probably more commonly known as TRVs and their main function is to control the air temperature of a space by automatically adjusting the amount of hot water that enters the radiator they are attached to. A TRV will allow you to have a little more control over the temperature in each room of your home, ...
Why does my TRV think my room is colder than it is?
It can sometimes be the case that a draught is causing the TRV to think that your room is colder than it actually is – this is particularly common if you have a door near to your radiator.
How does a thermostatic radiator valve work?
manual valves in Europe that operate with a full open-full close handle mechanism with no temperature sensing regulation at all, resulting in a massive waste of energy.
What does reaction time mean on a thermostat?
Reaction time means the time that it takes before the thermostats detects a change in temperature, and then starts to compensate for it by opening or closing the valve to either lower or increase the temperature in the room, so it reaches the desired set temperature. It’s not the time it takes for the thermostat to restore the set temperature in the room, but the time is takes before it detects the change and begins the process of compensating for it.
Can an electronic thermostat be connected to Alexa?
Electronic thermostats open up a new dimension for smart radiator control. Besides the 1 min reaction time , it can connect to home automation systems like Alexa and it comes with an App for remote control. You can also program schedules, so the heating adjusts atomically to the rhythm of the household, for example by lowering the temperature when you are at work or sleeping.
