do you need a water heater stand

Does water heater need to be on stand?

In fact, you may be wondering if you should use a water heater stand. But do you really need one? Some water heaters require the use of a stand, but it's typically the building and plumbing codes in your area that have the final say on the matter.

Is it OK for a water heater to sit on the floor?

All electric water heaters can be placed directly on the floor. The reason why people still think it is necessary to elevate the water heaters is that gas water heaters without FVIR were a serious fire hazard when placed directly on the floor. In fact it was required to elevate them 18 inches from the ground.

Do electric water heaters need to be raised?

Water heaters only need to be raised (per code) if they are using an ignitable fuel source (gas, propane, etc). And even then, the code is that the ignition mechanism is what needs to be raised. If your water heater is electric or a heat pump, no need to raise it per code.

What should I put under my water heater?

If your water heater is installed in an attic space or inside the interior living space, a drain pan is required under your water heater. Drain pans are not required for water heaters inside garages in most states. Additionally, the drain pan needs a drain pipe that drains to the outside or a nearby floor drain.

Why are water heaters raised?

The main reason you need to have your water heater placed on a hot water heater stands is to prevent fire incidents. Lifting your water heater prevents flammable fumes and vapors' from spilled gasoline or any other combustible fluid from lying on the floor in the garage.

How do you raise a water heater off the floor?

Generally speaking, there are three ways to lift your water heater: use straps, use a lift, or lift it manually. Of course, if you have a large capacity gas water heater it will be heavy. Get some help. You can buy water heater straps at just about any hardware store.

Do I have to put a pan under my water heater?

Water heater drain pans are required in many areas, so if you're a DIYer and plan to install the heater yourself, it's a good idea to check your local plumbing codes. But even if they aren't required in your area, most plumbers and industry professionals would certainly recommend installing one.

Does wrapping your water heater really save energy?

Water heater insulation could reduce standby heat losses by 25%–45% and save you about 7%–16% in water heating costs—and should pay for itself in about a year. You can find pre-cut jackets or blankets available from around $20.

Do water tanks need to be on concrete?

Concrete is the best base for a slimline tank because the shape of the tank (tall and narrow) means a risk of the tank tipping over if not on a solid base. Tank stands are another option for the tank base, but must be strong enough to hold the weight of the tank when full.

How do you put a floor under a water heater?

Steps in Laminate flooring project:Disconnect and remove hot water heater.Disconnect and remove washer and dryer.Remove shoe mold around the floor.Clean vinyl floor.Fill in missing areas in vinyl floor with floor patch compound.Use jamb saw to trim door casings to fit new flooring.More items...