How do you connect a refrigerator to a water line?
- Unplug the refrigerator or disconnect power.
- Attach the copper tube to the valve inlet using a compression nut and sleeve as shown.
- Turn water supply valve ON.
- Plug in the refrigerator or reconnect power.
How to hook up a water line to a refrigerator?
- Shut off the water supply.
- Locate the cold water source closest to the refrigerator. ...
- Drill a hole either through the cabinet wall separating the space under the sink and the refrigerator or in the basement ceiling up to the refrigerator. ...
- Attach one end of the copper tubing to the refrigerator's water pipe, using a nut and ferrule. ...
How do I hook up a refrigerator water line?
How to Connect a Water Line to Your Refrigerator
- Materials. To start off, I’d like to go thru all the tools and materials needed to complete the job. ...
- Tools. Now onto the tools. ...
- Choose a Cold Water Source. ...
- Fishing the Pipe. ...
- Making the Connection (water Source) I’ll first show you how to tap into the cold line using the Sharkbite push fitting, then I’ll remove it and solder on ...
Do all Refrigerators require a waterline?
Refrigerators need water lines so that they can get the water needed to make ice and dispense water. That being said, if your refrigerator doesn't have an ice maker or water dispenser, or if it has one or both of these but you prefer not to use them, you don't need to connect the refrigerator to a water line.
How to connect water to refrigerator?
Run the new supply tube to the back of the refrigerator. Connect the end of the tube to the 1/4-inch water supply fitting on the refrigerator. Tighten the connection just slightly more than hand-tight, using pliers.
How to stop water from moving in a faucet?
Place a rag or small bucket under the supply valve to catch water draining from the supply tube. Disconnect the faucet supply tube from the valve, using two pairs of pliers or two adjustable wrenches. Use one pair to hold the valve body securely to prevent it from moving .
How to open a water shut off valve?
Open the shutoff valve under the sink by turning the knob counterclockwise all the way or turning the lever so it is parallel to the water pipe. Check for leaks at all connections, then push the refrigerator into place, as needed. Confirm that the water dispenser and/or ice maker are working properly.
How long is a flex water supply tube?
You also need a 1/4-inch flex water supply tube that is long enough to run from the Add-A-Tee to the refrigerator, plus several feet so you can pull out the fridge without yanking on the water line. Measure the distance carefully, and buy a supply tube with plenty of length for the job. Flex water supply tubes are available in ...
What is flex water supply?
Flex water supply tubes are available in either a tough plastic nylon mesh or braided steel. Although the braided steel is considerably more expensive, the extra strength it provides is well worth the investment. Water leaks can cause significant (and very costly) damage, so buy the best-quality water supply tube you can.
Can you run a water line through a kitchen faucet?
This type of fitting is easy to install and is less prone to leaking than a saddle valve. In most cases, the water line can be run from a kitchen faucet water supply line through the kitchen cabinets and over to the refrigerator. If running the line through the cabinets is not feasible, you might need to run it through the floor and up to where ...
How far away from the refrigerator can you put a water line?
But it typically varies within the range of 1 to 20 feet. Most people run their water line through the faucet in ...
How to install water line when there is no water supply?
Firstly, you need to find a spot close to the refrigerator where you’ll hook up the water line. Most times, there’s an existing water hookup point. To save yourself the time, make use of it.
How to install a tee adapter?
To install the tee adapter, attach it to the shutoff valve and tighten it with your hand.
How to save yourself time on water hookup?
To save yourself the time, make use of it. Use your tee fitting. Add a tee fitting between the water supply shutoff valve and the pipe , or you can replace one of the existing fittings with a 3-way angle stop.
How to check refrigerator for leaks?
Check around where the tube connects to the refrigerator and tee for leakages. If there are any leakages, adjust the connection appropriately with the plier.
What does a water supply stub out valve mean?
The presence of this water-supply stub-out and shut off valve means there’s an existing connection either through the cabinets or through the floor.
How far does a water line go through a kitchen faucet?
But it typically varies within the range of 1 to 20 feet. Most people run their water line through the faucet in the kitchen through the cabinets and then to the refrigerator. But if you cannot run your water line through your kitchen cabinets, then you may have to take it through the floor.
How can I get water in my refrigerator without a water line?
Well, most of the modern-day fridges come with an automatic ice maker and a water dispenser. The water dispenser is installed with the automatic ice maker so that the ice maker collects the required water from the water dispenser.
How to connect the water line to the fridge?
The simple steps to connect the water line to the fridge is given below:
How much water does a refrigerator ice maker use?
You will be glad to know that the refrigerator doesn’t use much water in order to make ice. They will use just the required amount of water that it needs to make the ice.
How do I know if my refrigerator has a water line?
Well, to know if your fridge has a water line or not is very simple. You have to just locate whether your fridge has a shut-off valve or not. The shut-off valve is like an on and off switch for the cold water supply line connected to the refrigerator.
How much does it cost to install a water line for a refrigerator?
Because installing a water line to your refrigerator will cost around 70 dollars to even 180 dollars.
Does a fridge with an ice maker need a water line?
Actually, the fridges that come with built-in features like automatic ice maker as well as water dispensing capability, don’t need a water line in order to make ice.
How to shut off water line in refrigerator?
Once you locate the refrigerator water line shut-off valve, pause. Prior to shutting off the valve, it’s a good idea to turn off the icemaker because otherwise it will continue to cycle on, which can damage the valve. When you’re ready to shut off the valve, simply turn it in a clockwise direction until it stops.
Why shut off water line to fridge?
Being able to shut off the water line that connects directly to the fridge, rather than the water supply to your entire kitchen or home, will allow you to perform repair or installation tasks without disrupting all other home activities.
What to do if your refrigerator is leaking water?
Refrigerator removal or installation. Icemaker or water dispenser repair. If you notice a leak around your refrigerator, you likely want to shut off the water supply as quickly as possible to avoid water damage. Get more information on why your refrigerator may be leaking water to find a solution. Being able to shut off the water line ...
Where is the water shut off valve on a refrigerator?
While the location of the water shut-off valve varies from fridge model to fridge model, and home to home, there are a few specific places you are likely to find it: Hidden in a box or metal guard at the water source. Located near the cold water supply at the bottom of the kitchen sink. In the basement. In a crawl space.
How to hook up water to refrigerator?
If there is no hookup behind the fridge, you either have to run it from the sink or dishwasher. Measure how much line you will need and add five or six feet to that. Then add a few more feet just in case.
What to use to keep water line from collapsing?
When you are using a plastic or PVC pipe for your water line, it is a good idea to use a brass sleeve to keep it from collapsing onto itself. And if you are using these compression fittings, you will need to use plastic ferrules to keep it from leaking.
What is the difference between copper and plastic water lines?
A strong water supply is the key to an effective ice maker, but choosing between copper and plastic lines can be tough. Plastic water lines are less likely to bend and corrode, whereas copper water lines are much stronger. Whether it be cost, installation, or longevity, let’s explore the difference between copper and plastic water lines for your fridge.
What is the best material for a refrigerator?
Copper is the best material for your refrigerator’s waterline as it is stronger than plastic. However, copper is known to corrode and become kinked sometimes. Plastic, while decent, is not nearly as strong as copper. Although, plastic is the more affordable choice, so what you choose ultimately depends on your budget.
How to stop a water leak from leaking?
Wrap the threads with plumbing tape before attaching to prevent leaks. Hand tighten the line and then use a wrench to tighten it up. Attach the line on the water supply valve and tighten that nut as well.
How big is a water line?
Even though your water supply line is only ¼-inch, it can make a humongous mess if it gets damaged. Both plastic and copper have pros and cons, of course. But you want to make sure that you get the one that is best for your particular needs.
Can you run water lines in a house?
As long as you shut off the water first and you have enough line to reach the main water line, there is no reason not to run it there. Just be sure you do not cross any wiring or other plumbing lines.
