The PAR30 bulb on the other hand is a considerably smaller 30/8" wide, or 3 3/4" wide, which is too small to fill the larger 6"+ cans used for BR40 or PAR38 bulbs. They do make trims shaped like cereal bowls with a missing bottom, which are used to fit medium-size R30 or PAR30 lights into a 6"+ can.
Full Answer
What is the difference between PAR30 and BR30 bulbs?
Manufacturers use standard numbers like PAR30 or BR30 to indicate the bulb size. The number indicates the diameter of the lamp portion, not the base of the bulb. Diameter for these two bulb types is measured in eighths of an inch. Example: BR30 = 30/8 inches or approximately 3 ¾” Notice that a PAR30 is the same diameter as a BR30 bulb.
What is the diameter of a BR30?
The BR30 is 30/6ths of an inch or 30 divided by 8 which equates to 3.85′′ in diameter. The same example can be used for a PAR38.
Will a br40 fit in a br38?
PAR38 will fit - the number denotes eighths of inches wide, so PAR38= 38/8" width, or 4 3/4"w. A BR40 is 40/8" inch wide, or 5" wide.
What is the diameter of a br40 bulb?
BR40 = 4.72” Notice that a PAR30 is the same diameter as a BR30 bulb. You can swap these bulb types to change from wide to spot, depending on what you need in each location. BR and PAR LED replacements for your traditional flood or spotlight bulbs not only create a different style light beam from each other, the bulbs also look different.
Is BR30 same as PAR38?
Size comparison of PAR vs BR floodlights The number represents increments of an 8th of an inch. For example, a BR30 is 30/8ths of an inch or 30 divided by 8 which equals 3.75″ in diameter. The same example applies to a PAR38. Divide 38/8ths of an inch or 38 divided by 8 which equals 4.75″ in diameter.
Can I use a BR30 bulb in an PAR30 fixture?
The number indicates the diameter of the lamp portion, not the base of the bulb. Notice that a PAR30 is the same diameter as a BR30 bulb. You can swap these bulb types to change from wide to spot, depending on what you need in each location.
Can I use BR40 instead of PAR38?
PAR38 will fit - the number denotes eighths of inches wide, so PAR38= 38/8" width, or 4 3/4"w. A BR40 is 40/8" inch wide, or 5" wide. About the same size and will fit in the same fixtures.
Can you use PAR30 instead of PAR38?
Short neck PAR30 bulbs are more common for tracking lighting while long neck PAR30 bulbs are useful for recessed cans. PAR38 BULBS are primarily used for outdoor lighting. PAR38 bulbs can be used as general flood and safety lights....The Ultimate Guide to LED Spotlight Bulbs: PAR20, PAR30, PAR38.Bulb ShapeBulb SizePAR30 Long4.50" x 3.75"PAR385.00" x 4.75"2 more rows
What is the difference between PAR 30 and BR30?
As we have discussed, BR30 light bulbs provide soft, directional lighting with wide beam angles of between 100 and 120-degrees. Conversely, PAR30 bulbs deliver strong, directional light that is more targeted with a 45-degree beam angle.
What does PAR38 mean on a light bulb?
PAR stands for Parabolic Aluminized Reflector. BR stands for Bulged Reflector. What does the number after PAR or BR mean? This number is indicative of the diameter of the lamp in terms of 1/8ths of an inch. For example, a PAR38 bulb is (1/8 x 38)” or 4 ¾” across.
Are PAR and BR bulbs interchangeable?
The answer truly depends on the application. If you need directional light in a small area, then PAR bulbs will fit well. For a light that spreads across a more comprehensive section of your space, BR lights are ideal. No matter which light bulb you need, HyLite LED Lighting will help you find the right ones.
What does BR stand for in light bulbs?
BR (for bulged reflector) bulbs are lamps with “wide flood” beam angles, which means that they provide more than a 45 degree angle when lighting an area. PAR (short for Parabolic Aluminized Reflector) bulbs are available in these angles: Narrow spot, 5-15 degrees. Spot, 16-22 degrees.
Where can I use BR30 bulbs?
The dispersed lighting from the curved shape makes the A19 bulb better suited to floor lamps and hanging ceiling fixtures. Conversely, the shape and reflective coating of the BR30 casts direct lighting that makes the bulb ideal for recessed fixtures in the kitchen or hallway or track lighting.
What is smaller than a PAR 38?
PAR20 LEDs At 2.5" across, these are the smallest of the PAR lamps we're discussing. They're more frequently used to highlight smaller pieces of art, objects on a single shelf, specific products in retail, etc. They're most often used in track lighting.
Are all flood lights the same size?
Secondly are your flood lamps. These come in three main sizes for most homes, PAR20, PAR30, and PAR38.
What's the difference between BR30 and BR40?
The Shapes: BR30 and BR40 The 30 and 40 refer to the size of the bulb in 1/8 inches -- 30/8 and 40/8 inches respectively. Or more simply, the BR30 is just under 4" across and the BR40 is 5" across. So when you're choosing a bulb for recessed cans, the first thing to know is the size of the cans.
Where can I use BR30 bulbs?
The dispersed lighting from the curved shape makes the A19 bulb better suited to floor lamps and hanging ceiling fixtures. Conversely, the shape and reflective coating of the BR30 casts direct lighting that makes the bulb ideal for recessed fixtures in the kitchen or hallway or track lighting.
What is a BR 30 bulb?
BR30 lamps are a type of lamp approximately 5 inches long and slightly less than 4 inches in diameter. They belong to category of directional lighting types, with typically a "wide flood" beam angle.
What does BR stand for in light bulbs?
bulged reflectorThese different beam angles come from a separate shaped reflector. BR stands for “bulged reflector.” These bulbs traditionally had a bulged reflector inside the housing to increase the amount of light they put out, giving them a slightly bulging shape.
What size can for BR30 bulb?
If you're using recessed lighting, the type of bulb you're going to choose will largely depend on the size of the outlet the bulb is being screwed into, or rather the "can." If you have a 5 inch can, a BR30 is perfect, but if you have a 6 inch can, you'll leave way too much space.
What is the difference between BR30 and BR40?
The amount of light produced by the BR30 and BR40 LEDs is the main difference between them. The BR40 LEDs are brighter than the BR30 ones. The walls and ceiling will be washed in a two-story space.
What is the difference between BR and R light bulbs?
BR bulbs have the same shape as the R-shape bulb. The BR bulb has an extra reflector in the neck of the bulb to better capture and cast light forward, which was previously lost in the neck and side of the standard R bulb.
What is the difference between BR30 and A19?
The shape is the first thing you see when you look at the two bulbs. The bulb’s overall shape is referred to as the A. The A19 has a curved shape, but the BR30 bulb is completely different. The term “bulge reflector” is used to refer to a bulb that points light straight ahead from its flat end.
Where can I use BR30 bulbs?
The BR30 light bulbs deliver soft-edged, directional light and can be found in general household light fixture, can lighting, and/or track lighting. The lighting is less precise and produces less shadow, but it is great for dimmer switches.
Can BR30 bulbs be used outside?
Bedrooms, kitchens, living areas, lamps and offices are some of the ideal applications for the BR30LED bulbs.
Is BR30 the same as E26?
The BR30 and A19 are for the E26 and A19 light sockets, respectively. The A19 is more common than the E26, but it is not as thin.
Can I put dimmable bulb in any lamp?
There is a non-dimmable circuit that can be used for a dimmable lamp. A non-dimmable lamp in a dimmable circuit can cause damage to the lamp and the circuit. The packaging and lamp are marked as non-dimmable.
What size light bulb fits a BR40?
PAR38 will fit - the number denotes eighths of inches wide, so PAR38= 38/8" width, or 4 3/4"w. A BR40 is 40/8" inch wide, or 5" wide. About the same size and will fit in the same fixtures. The PAR30 bulb on the other hand is a considerably smaller 30/8" wide, or 3 3/4" wide, which is too small to fill the larger 6"+ cans used for BR40 or PAR38 bulbs. They do make trims shaped like cereal bowls with a missing bottom, which are used to fit medium-size R30 or PAR30 lights into a 6"+ can. But the result is large holes in the ceiing, conical cereal-bowl trim kits, and small bulbs in the middle, which don't look all that appealing IME. Some trims are designed to handle either size bulbs, but in these cases the larger one always looks like it fits better.
What to do if an electrician gives you BR40s?
If the electrician insists on giving you cheap off-brand BR40s, just try them and see if you like them, or if not quickly change them out. You're not paying much for them, but given a choice I'd just tell the electrician that you want to use your own bulbs, and tell him what they are.
What Is PAR30?
You may have questions what does par30 mean? here it the answer, PAR30 means Parabolic aluminized Reflector.
What is BR30 lamp?
BR30 lamps are named after bulged reflectors which set them apart from other similar lighting systems. These incandescent bulbs come with a reflective coating on the inner surface of their sides that dictates its light’s direction.
Why are PAR30 bulbs used outside?
One of the main reasons which make PAR30 bulbs suitable for outdoor use is their wet rating . This dictates how the lighting will behave after coming into contact with water. Having this measure is necessary to ensure that the light will not be hampered by rain, dripping water or any such liquid splashed at them.
How long do PAR30 bulbs last?
Compared to some other light sources, PAR30 bulbs can seem a little pricey. However, that is complemented by its long lifetime of 70,000 hours and high energy savings. As a result, investing in it may provide you with long years of service while ensuring lower utility bills.
Why are PAR30 and BR30 the same?
They both have the same number in their names because their diameters are of the same length . In any light source similar to bulbs, the name includes a number that is the multiplication of its diameter length and eight.
What does PAR mean in light bulbs?
For light bulbs, PAR stands for parabolic aluminized reflector which represents a certain category of electric lamps. It produces a narrow directional beam similar to spotlights.
How wide is a BR30 bulb?
Their top is much wider than the bottom part so that the produced light is spread evenly on the surface. The top of a BR30 lamp is 3.75 inches wide while the bottom part is as narrow as all other bulbs.
What is the size of a BR30 light bulb?
So, a BR30 is 30/8 inches, or three and 3/4 inches. An MR11 is 11/8 inches. So, you can swap out a PAR30 for an R30 or a BR30 - they are all the same size.
What is BR lamp?
Moving on to BR: Want to take a guess on what it stands for? This is another reflector lamp to maximize brightness, but this time, the light bulb itself has a bulged shape to direct light out. One disadvantage of the BR lamp is that it's a little longer than the PAR and MR, which means it tends to sit lower in the recessed fixture - and perhaps, protrude from the bottom of the recessed light fixture.
What is MR light bulb?
The MR indicates the light bulb has a multifaceted reflector on its inside. The facets help gather light from the filament to create a very concentrated light beam. MR lamps are primarily available in smaller sizes - they are all about beam control, which is typically desirable for a narrower light beam.
What does R stand for in light bulbs?
Finally, the simple R. As you might assume, it stands for reflector in this case. There is a mirrored coating on the back of the light bulb to improve light output.
Can you swap a PAR30 for a BR30?
So, you can swap out a PAR30 for an R30 or a BR30 - they are all the same size. The PAR denotes the light bulb has a parabolic aluminized reflector on its inside, directing light out. That PAR coating maximizes the light output that you'll get from the light bulb.
Is LED cheaper than halogen?
It renders colors very well, it's affordable, and it gives you a lot of light output. If you're looking for efficiency, though, halogen is not your target. LED has a higher price point, but it also gives you a longer lifetime and lower energy use!
