Full Answer
What did Briggs and Stratton make?
Eventually Briggs and Stratton settled on manufacturing automotive components and small gasoline engines. Briggs purchased an engine patent from A.O. Smith Company and began powering early washing machines and reel mowers as well as many other types of equipment.
Who makes Briggs&Stratton Power Products?
In 2000, the company acquired its consumer generator business from the Beacon Group and formed Briggs & Stratton Power Products.
Why did Briggs and Stratton Stop Making Easy spin lawn mowers?
The intake-side Easy-Spin remained in use on Briggs & Stratton's engines larger than those used on mowers subject to the brake requirement, but was discontinued in 1997 due to tightening emission regulations.
What was the Briggs and Stratton twin cylinder engine?
The design was a series of counterweights opposing the crankpin. The Twin Cylinder Engine – This engine was introduced in 1977 as a means of competing with Briggs & Stratton's rivals, particularly Japanese firms like Honda who were cutting into traditional Briggs & Stratton markets by producing lawn mower engines (and later, complete lawn mowers).
See more
Does Briggs & Stratton own Simplicity?
2004 – Simplicity was purchased by Briggs & Stratton for $227.5 Million. 2022- Celebrates 100 years of innovation and dependability in the premium mower industry.
What brands are made by Simplicity?
Simplicity bought the Snapper company in 2002. Snapper had built Massey Ferguson lawn tractors many years before. Over the years, Simplicity has also built lawn and garden tractors for J.C. Penney, Montgomery Ward, Viking (part of Stihl), Homelite Corporation and Rapid.
What company makes Simplicity mowers?
The Briggs & Stratton Corporation, a maker of small engines, said yesterday that it would buy Simplicity Manufacturing Inc. for $227.5 million, adding lawn mowers and tractors to its product line.
What engines does Simplicity use?
Lawn mowers from Simplicity are equipped with durable, reliable, and powerful engines from Briggs & Stratton. Reliable and easy to maintain, Briggs & Stratton engines power 8 out of 10 of America's top lawn mower brands.
What year did Briggs and Stratton buy Simplicity?
2004In 2004 Briggs & Stratton purchased Simplicity.
Are Snapper and Simplicity the same?
In 2002 Snapper was acquired by Simplicity Manufacturing, which was then acquired by Briggs & Stratton in 2004. Since then the Snapper brand name has been added to products such as weed trimmers, hedge trimmers, leaf blowers, among others.
Are Ferris and Simplicity mowers the same?
Ferris became a subsidiary of Simplicity Manufacturing, Inc. Throughout the next year, Simplicity demonstrated its commitment to the company by increasing its workforce, completing a factory expansion, and pouring resources into product development.
Where are Briggs and Stratton engines made?
the USABriggs & Stratton builds over 9,000,000 engines in the USA each year. The company employs over 3,000 employees in six states. Wauwatosa, WI, is home to the company's headquarters and R&D center. Manufacturing plants are located in Poplar Bluff, MO; Auburn, AL; Statesboro, GA; and Sherrill, NY.
Who is Husqvarna mower made by?
The Husqvarna GroupThe Husqvarna Group (Swedish pronunciation: [ˈhʉ̂ːsˌkvɑːɳa ˈɡruːp]) is a Swedish manufacturer of outdoor power products including robotic lawn-mowers chainsaws, trimmers, brushcutters, cultivators, and garden tractors.
Are Simplicity lawn tractors reliable?
Yes, Simplicity mowers are worth the money. If you want a reliable unit to get your lawn maintenance on the right track, its top-tier maneuverability and high-quality cutting performance won't let you down. With years of industry experience, these models are specifically built to address lawn maintenance issues.
What engine does Husqvarna use?
This 46-inch Husqvarna lawn tractor comes with a 2-cylinder Kawasaki engine with an automatic drive system and electric PTO.
What brands use Kohler engines?
Kohler engines are used mainly by these power equipment brands: Dixon, Toro, Cub Cadet, Ariens, Husqvarna, Gravely, Dixie Chopper, Craftsman, Westinghouse, Simpson. Engines used in these products: Mowers, generators, ATVs, pressure washers. Key Competitors: Briggs and Stratton, Honda, Generac, Cummins.
Does Ferris make Simplicity mowers?
Simplicity manufacturing, along with its subsidiaries, Ferris, Snapper, and Giant-Vac were purchased by Briggs & Stratton Power Products Group.
Is Simplicity an American company?
The roots of Simplicity can be traced back to Milwaukee, Wisconsin, where in 1872 the Western Malleable and Gray Iron Manufacturing Company was established to produce gray iron castings. With the advent of the automobile, the company began to make gasoline-powered engines, marketed under the "Simplicity" trade name.
Does Simplicity make walk behind mowers?
Walk Behind Mowers, Lawn Tractors, Zero Turns - Simplicity Mowers.
Where is Briggs and Stratton located?
Briggs & Stratton, headquartered in Milwaukee, Wisconsin, is focused on providing power to get work done and make people's lives better. Briggs & Stratton is the world’s largest producer of gasoline engines for outdoor power equipment, and is a leading designer, manufacturer and marketer of commercial lithium-ion batteries, power generation, pressure washer, lawn and garden, turf care and job site products through its Briggs & Stratton ®, Simplicity ®, Snapper ®, Ferris ®, Vanguard ®, Allmand ®, Billy Goat ®, Murray ®, Branco ® and Victa ® brands. Briggs & Stratton products are designed, manufactured, marketed and serviced in over 100 countries on six continents.
Who owns SimpliPhi Power?
MILWAUKEE (September 7, 2021) – Briggs & Stratton announced today it has acquired SimpliPhi Power, a California-based manufacturer of energy storage and management systems which store solar, grid and wind power for future use by residential, commercial and industrial customers. Through this acquisition, Briggs & Stratton will accelerate its growth into the energy storage system market, expanding the business to offer a comprehensive range of products that provide safe, reliable and affordable energy solutions to a broader group of customers in this fast growing market.
How to contact Briggs and Stratton?
Briggs & Stratton at (800) 227-3798 between 8 a.m. and 5 p.m. CT Monday through Friday, or visit the firm's website at www.briggsandstratton.com and click on "Recalls and Notifications" for more information. Dealers can be found using the dealer locator at www.simplicitymfg.com.
Where is the simplicity logo on a lawn tractor?
The Simplicity logo is on the side of the mower or garden tractor. Mowers and garden tractors with the following model and serial numbers are included in the recall. The model and serial numbers are located on the frame near the front tires or on the frame rail below the seat. Model.
Where is Briggs and Stratton located?
Briggs & Stratton Corporation is an American Fortune 1000 manufacturer of gasoline engines with headquarters in Wauwatosa, Wisconsin .
What was Briggs and Stratton's generator made of?
During World War II, Briggs & Stratton produced generators for the war effort. Some pre-war engines were made with aluminum, which helped the company develop its expertise in using this material. This development, along with the post-war growth of 1950s suburbs (and lawns), helped secure Briggs & Stratton's successful growth throughout the 1950s and 1960s.
What is easy spin on a lawn mower?
Easy-Spin Starting – This compression release, implemented as an extra hump on the intake lobe of the camshaft , was introduced in 1961 to reduce the effort required to start an engine. In 1982, a new U.S. federal safety regulation required lawnmower blades to stop spinning within three seconds of the operator letting go of the handle. The least costly, most common way of complying with the new regulation was to put a flywheel brake on the mower engine, to stop the engine (and therefore the blade) immediately when the handle was released. Briggs & Stratton engineers found engines with the Easy-Spin camshaft were unacceptably difficult to restart after being braked to a quick stop. The Easy-Spin lobe hump was moved to the exhaust valve, but this reduced engine performance. The intake-side Easy-Spin remained in use on Briggs & Stratton's engines larger than those used on mowers subject to the brake requirement, but was discontinued in 1997 due to tightening emission regulations.
Why was the Easy Spin lobe hump discontinued?
The intake-side Easy-Spin remained in use on Briggs & Stratton's engines larger than those used on mowers subject to the brake requirement, but was discontinued in 1997 due to tightening emission regulations.
Is Briggs and Stratton going bankrupt?
In 2019, Briggs & Stratton announced they would be closing their engine factory in Murray, Kentucky with production being moved to their Poplar Bluff, Missouri facility. On July 20, 2020, Briggs & Stratton filed for Chapter 11 bankruptcy. KPS Capital Partners would purchase a majority of the company stake for $550 Million.
Is Briggs and Stratton a masthead?
The Briggs & Stratton logo was always a masthead, but it has been changed several times over the course of the company's 80-plus years.
The engine maker is using cash, not its hot stock, to fund a key acquisition
Shares of Briggs & Stratton (NYSE:BGG), best known for making generators, outboard motors, and lawn mower engines, rose 10% in Wednesday's trading following the announcement that the company agreed to buy privately held Simplicity Manufacturing, a manufacturer of outdoor power equipment, for just less than $230 million in cash.
OTC: BGGS.Q
In the last 12 months, investors have eaten up this dividend-paying company's performance operationally: Its shares have positively crushed the S&P 500 over that period. Given that, you might think the company might have used its hot stock, rather than cash, as an acquisition currency.
Premium Investing Services
Invest better with the Motley Fool. Get stock recommendations, portfolio guidance, and more from the Motley Fool's premium services.
Overview
History
In 1908, inventor Stephen Foster Briggs and investor Harold M. Stratton started an informal partnership to capitalize on the growing automobile industry. Eventually Briggs and Stratton settled on manufacturing automotive components and small gasoline engines.
In 1919 Briggs & Stratton purchased the manufacturing rights for a small, simple two-seat vehicle with a gasoline engine called the Smith Flyer from the A.O. Smith Company in Milwaukee. The Flye…
Acquisitions, agreements and joint ventures
• Farymann Diesel GmbH (1979–1984) – Based in Lampertheim (near Mannheim) in Germany, this was the first foreign acquisition Briggs & Stratton had ever made and was a poor fit with the company's acknowledged expertise in high volume, low cost production. They officially completed the acquisition on May 29, 1979. Despite investing in new production methods, Briggs & Stratton never understood the very low volume, highly customized nature of the air-cooled diesel engine …
Innovations
• The aluminum engine – This was introduced in 1953 as a means of having a lighter-weight engine for applications such as rotary lawn mowers. It was improved five years later in 1958 with the introduction of the Kool-Bore (all aluminum) and Sleeve-Bore (aluminum, with a [[cast iron]|cast-iron]] cylinder liner).
• Easy-Spin Starting – This compression release, implemented as an extra hump on the intake lobe of the camshaft, was introduced in 1961 to reduce the effort requi…
Logo history
The Briggs & Stratton logo was always a masthead, but it has been changed several times over the course of the company's 80-plus years.
• Pre War logos (1931–1943) – This logo started off with a diamond shape and read Briggs & Stratton and its home city of MILWAUKEE, WIS., U.S.A. below it; in the middle, it had the words 4 CYCLE on the top mast and the words GASOLINE MOTOR and phrase MADE IN U.S.A. on the bot…
Models
• 5 (cast iron) (1950–1957)
• 5S (cast iron; suction carburetor) (1949–1957)
• 6 (cast iron) (1952–1957)
• 6S (cast iron; suction carburetor) (1949–1957)
See also
• Eshelman
• John I. Beggs – former Chairman
Headquarters, manufacturing plants, and testing facilities
Briggs & Stratton builds over 9,000,000 engines in the USA each year. The company employs over 3,000 employees in six states. Wauwatosa, WI, is home to the company's headquarters and R&D center. Manufacturing plants are located in Poplar Bluff, MO; Auburn, AL; Statesboro, GA; and Sherrill, NY. The company also has a proving grounds and testing facility located in Fort Pierce, FL.