DRYLOK ® Protector Clear Low Sheen Penetrating Sealer appears milky in the can but dries clear. Apply by brush, roller, spray, or squeegee. Spread evenly and do not allow puddles or a heavy surface film to occur.
What is drylock or drylok?
If you have been talking with a home improvement professional and he or she mentions Drylock or Drylok, what he is talking about is a basement waterproofing sealer that is put on the concrete. This product is designed to prevent water from seeping through the foundation and walls in the basement.
Does drylok moisture sealer work?
Moisture can come through the concrete, stone or block and cause a lot of problems under the house so sealing it is an integral part of the process in making sure your basement is clean and dry. The theory is that Drylok prevents all of this water seepage after it is applied.
Why choose drylok clear masonry?
This technology provides a durable, waterproof, easy to clean, non-yellowing high gloss finish. DryLok Clear Masonry Waterproofer incorporates environmentally safe green biocides, to resist the growth of mildew on the dry paint film.
What are the disadvantages of using drylok?
This will most often result in mold or fungi growth and can cause a number of insect and rodent problems down the line. Unlike conventional paint that bonds to a surface and has the potential to come off with water pressure, DRYLOK penetrates the pores in the masonry surface, bonding and creating an impenetrable barrier.
When should you not use DRYLOK?
The fact is Drylok is not intended for use on floors. However, if you're planning on waterproofing your basement, you need to waterproof the walls AND the floor. Waterproofing one and not the other won't result in a waterproofed basement.
Can you paint over clear DRYLOK?
Can you paint over DRYLOK® Masonry Waterproofer? A. Absolutely. In fact, DRYLOK® makes an ideal base coat.
What happens if you put DRYLOK over paint?
However, DRYLOK® cannot be used over an oil or latex-based paint on the inside of a building. DRYLOK® will adhere to these paints, but if it cannot penetrate into the pores of the masonry itself, it will not waterproof the surface.
Does DRYLOK penetrate concrete?
Formulated with our exclusive SALTLOK® Technology, it penetrates into the surface and provides superior resistance to unsightly efflorescence stains (salt deposits) that are often visible on brick, block, and poured concrete surfaces.
Can mold grow behind DRYLOK?
The product provides an 'inert coating' which means it does not promote the growth of mold or mildew. Additionally, Drylok Extreme consists of an additive called 'mildewcide' which acts to further prevent the potential for mold or mildew to grow under paint.
How many coats of DRYLOK should I do?
TWO COATSAPPLY TWO COATS. Allow to dry 2 hours between coats. The second and subsequent coats may be applied by roller, brush, or spray. For information on spray application specifications visit www.
Is Drylock a good idea?
Drylok is an indoor waterproofing paint, and while that has been mentioned several times, it is a crucial detail. Waterproofing your basement from the inside may be cheap, but it is by far the least effective way of waterproofing your basement, and this is because it never stops the source of the water.
Will DRYLOK seal cracks?
DRYLOK® Pourable Masonry Crack Filler is formulated to fill and seal small cracks in concrete surfaces, sidewalks, walkways, steps, patios, garage floors, and more. It provides excellent adhesion, dries to the color of concrete and cleans up easily with soap and water.
Is DRYLOK as good as a primer?
It can be used as a base coat or primer for other paints, for instance, if you prefer a shade not available in any of the DRYLOK products. Wait at least 24 hours before painting over fresh DRYLOK, as this allows for ample drying time. Any acrylic or latex paint works well atop DRYLOK.
Does DRYLOK stop water from coming in basement?
DRYLOK® Extreme Masonry Waterproofer is the perfect solution to stop water infiltration through basement walls, and it's easy to apply.
Does DRYLOK Harden?
Product Details. DRYLOK Fast Plug is a fast-setting hydraulic cement that sets in just 3-5 minutes, preventing water from flowing, even under pressure, through cracks and holes in concrete and masonry structures.
Is DRYLOK thicker than paint?
Whereas you would apply paint in thin, light layers, DRYLOK goes on thick, and for best results, you need to work it as deeply as possible into the pores of the surface.
Can you paint over concrete waterproofing?
Bottom line: If you wish to paint a line on concrete that has been treated with a sealer or coating, the sealer or coating must be removed before the paint is applied. To accomplish this, the concrete should be stripped to a level below that to which the sealer or coating has penetrated.
Can you apply DRYLOK over old DRYLOK?
DRYLOK is not warranted when used over previously painted surfaces or on horizontal surfaces. DRYLOK EXTREME may be applied over surface previously painted with Latex Base DRYLOK Masonry Waterproofer or Oil Base DRYLOK Masonry Waterproofer.
Can I paint over waterproofing paint?
Paint can be applied to water sealers, but the drying time of the sealer itself is the most important part of this task. For best results, prime the water-sealed wood first. Use either a latex-based or an oil-based primer as your first coat of paint before applying the finishing coat.
Can you paint over liquid applied waterproofing?
To ensure that the waterproofing membrane is fully dry, wait at least 24 hours after installation before painting it. Applying a primer or paint to a damp waterproofing membrane can compromise waterproofing properties and lead to structural damage.
What is drylock for?
A. Use DRYLOK ® WetLook Clear High Gloss Penetrating Sealer for a decorative high-gloss coat over floor paint.
What materials break down?
Porous materials like natural and man-made stone, concrete, stucco and masonry will start to break down, dust, pit, crack, and/or stain when subjected to weather, water, oil, and UV rays. The only way to prevent damage and deterioration is to protect your surfaces with a good quality sealer
Can drylock be used over paint?
DRYLOK ® WetLook Clear High Gloss Penetrating Sealer may be applied over existing paints and coatings. In addition to normal surface preparation, old glossy surfaces must have the gloss removed by using sandpaper. Remove all sanding dust with a vacuum or tack cloth. Many previously coated surfaces may only require 1 coat.
Can drylock be used on light colored surfaces?
On light-colored surfaces, some darkening may take place. Test in an inconspicuous area to be sure darkening does not occur. DRYLOK ® WetLook Clear High Gloss Penetrating Sealer may be applied to surfaces previously coated with a similar treatment. For best results, test a small area for proper adhesion prior to coating the entire surface.
Does Drylock crack?
Their brochures are partially correct – ordinary paint WILL get forced off with any water seepage and Drylock WILL stay on a bit longer but it does something else – it cracks! Drylok doesn’t expand and contract so when temperature, humidity or moisture levels change (which happens often as we all know, especially in New England where Neutocrete ’s headquarters are located), the Drylok starts to crack up. The other issue is that any substance like cement block is continually moving which further reduces Drylok’s ability to properly prevent water seepage.
Does Drylok have food?
The chemical makeup of Drylok paint is a particular food source that mold actually likes (mold also grows on wood and many other similar surfaces as those are food sources as well) so the mold has food in plenty if Drylok is present.
Does Drylok help mold grow?
I know, it’s hard to believe but Drylok actually HELPS mold to grow! A friend of mine is a contractor and he told me a story about how he used Drylok in a basement, only to come back a few months later and realize that the foundation was covered with mold.
Does Drylok Breed Mold?
Drylok is a product that is used to stop water seepage on interior masonry walls. It is supposed to seal basement foundations, primarily block foundations but I’ve seen it on concrete as well. Of course, the reason you need to seal any basement foundation is because the foundation is porous. Moisture can come through the concrete, stone or block and cause a lot of problems under the house so sealing it is an integral part of the process in making sure your basement is clean and dry. The theory is that Drylok prevents all of this water seepage after it is applied.
What is Drylock waterproofing sealer?
If you have been talking with a home improvement professional and he or she mentions Drylock or Drylok, what he is talking about is a basement waterproofing sealer that is put on the concrete. This product is designed to prevent water from seeping through the foundation and walls in the basement. Drylock is applied to the walls and floor with a brush or roller and many times homeowners will use this as a do-it-yourself fix to wet walls and floors.
Can you drylock a wet wall?
Drylock is applied to the walls and floor with a brush or roller and many times homeowners will use this as a do-it-yourself fix to wet walls and floors. The problem with this DIY approach is that often the root issue of the water seeping into the basement has not been addressed.
What is a dry lock waterproofer?
It is a ready-mixed, low odor formula that protects against water while allowing moisture to pass through the concrete naturally. It is easily applied with a brush and a roller (like pretty much all concrete sealers), and it has a low VOC content.
Is Dry Lock waterproofing the same as Behr?
However, that does not necessarily mean it is the best, or even the most cost effective, option. The Dry-Lock Masonry Waterproofer has a lot in common with the Behr Masonry Waterproofer.
Is dry lock waterproofer a paint?
However, the Dry-Lock Masonry Waterproofer is a latex-based paint-type of surface protection. It isn’t even as strong as Behr’s offering, which is an acrylic solution.
Why use Drylok?
Well, in short, Drylok to prevent water from coming into foundation walls and messing with the foundation. Basement foundations are porous and moisture and water are able to seep through, causing mold, fungi and all kinds of rodent and insect ISSUES down the line.
Why does drylok bubble?
When the white calcium flakes begin to arrive, they bubble up behind the Drylok seal and because the seal is not strong enough to withstand the calcium, it starts to bubble as the volume of calcium builds up.
Does rubberwall stop efflorescence?
It can stretch and flex and it’s elongation is up to 700%! This means that none of the deposits caused by efflorescence will ever penetrate the seal. It doesn’t stop efflorescence because as I mentioned before, nothing can actually “stop” ...
