Who made Evinrude 4 strokes? Released on the Aussie market about a year ago, the Evinrude 70 is the result of a joint effort between Suzuki and OMC OMC, or Otara Millionaires Club, was a New Zealand music group. They were best known for their 1996 hit "How Bizarre", named one of the greatest New Zealand songs of all time by the Australasian Performing Right Association. The full name of the band is a tongue-in-cheek reference to Otara's status as one of the poorest suburbs of Auckland.OMC
What happened to Evinrude outboards?
What happened to Evinrude outboards? The first outboard brand — founded 113 years ago by Ole Evinrude— is no more. Bombardier Recreational Products announced that they would cease production of all Evinrude outboards, and their Sturtevant, Wis., facility will shift to pursue new projects related to BRP’s boat holdings.
Why did Evinrude fail?
Why did Evinrude fail? Evinrude wasn’t in the 300 HP + space and that hurt them. They didn’t have the same dealer network that Mercury or Yamaha did and didn’t own as many transoms, making it tough out of the gate. … Evinrude had legacy Etec engines alongside the new G2 engines for too long. Why is Evinrude closing?
Did Evinrude go out business?
With three new outboard engines that debuted in 2019 and the boating season happening now Evinrude has closed its doors unexpectedly. Even dealers weren’t expecting this. The iconic Canadian outboard motor manufacturer is out of business. It will eliminate 400 jobs at its manufacturing plant in Sturtevant, Wisconsin, just outside of Chicago.
Where is the serial number on an Evinrude outboard motor?
How to Decode Evinrude Outboard Serial Numbers
- Look at the first digit. If it's a letter other than "J" or "E," it's a model variation built for a boat builder to include in a boat ...
- Move to the next group of digits a set of two or three numbers that tells you the horsepower.
- Examine the next group of two or three letters that identify the trim on the basic motor. ...
What year did Evinrude start making 4-stroke?
They can be broken down into four distinct generations. Prior to 1958 all Johnson/Evinrude engines were either a one or two-cylinder. In 1958 the V4 was introduced.
Are Evinrude ETEC motors 2-stroke or 4-stroke?
The technology is considered 2-Stroke, Direct Injection. Evinrude E-TEC in fact, has cleaner exhaust emissions than a 4-stroke, it produces 5 to 10 times less Carbon Monoxide (CO) while idling or trolling.
What is the most reliable 4-stroke outboard motor?
Suzuki DF90. This outboard engine is of four-stroke, and it has 90 horsepower. It is the best engine to repair because it has a bit long tooth that can be functional for 8 years and more.
Why did they stop making Evinrude outboards?
Canadian company BRP stunned the recreational boating industry with their announcement it will immediately stop making Evinrude outboards. “Our outboard engines business has been greatly impacted by COVID-19, obliging us to discontinue production of our outboard motors immediately.
Does Johnson make a 4-stroke outboard?
Johnson Outboard Motor Prices and Values With 2-stroke and 4-stroke gasoline engines as well as electric trolling motors existing in their product portfolio, Johnson was associated in the construction of boat motors throughout the 20th century.
Is a 4-stroke outboard better than a 2-stroke?
4-Stroke Outboards Pros The fuel efficiency of a 4-stroke motor can be 50% better than that of a 2-stroke motor with the same HP. As for environmental concerns, 4 stroke outboards produce far less harmful emissions, which can be as much as 90% cleaner than those from a similar sized 2-stroke motor.
When did Evinrude stop making 2 strokes?
The Canadian group BRP indicated in a press release dated May 27, 2020 that it will stop production of Evinrude outboard engines. The manufacturing of E-TEC and E-TEC G2 engines in the Stutevant plant will cease.
Does Evinrude ETEC need oil?
Even though you may see other synthetic oils advertised for use in Evinrude E-TEC outboards, only XD-100 should be used. Evinrude itself states that only XD-100 should be used in E-TECs that feature the 'reduced oil' setting, otherwise boat owners run the risk of seriously damaging their engine.
How many hours will a 4-stroke outboard last?
A typical two-stroke or four-stroke outboard engine should provide 1,500 hours of run time.
Is Evinrude coming back?
We have no plan to bring back the production of outboard engines E-TEC and E-TEC G2. Q: Will you sell the brand or the technology of your Evinrude engines? BRP: Evinrude has a long history and we will maintain the trademark. At this point, we have no intention of selling the brand or the technology of Evinrude.
What is the quietest outboard motor?
You can hear the result of this effort when you turn the key of a new Mercury L6 Verado® outboard. Or perhaps you won't. Despite muscular ratings of 350hp and 400hp, these Supercharged L6 Verado models are the quietest engines in their horsepower category.
Can you still buy Evinrude outboards?
Evinrude outboard motors will no longer be manufactured. The boating world received shocking and surprising news. One of the world's leaders in outboard motor manufacturing will no longer exist.
Who bought out Evinrude?
BombardierIn 2001, Bombardier acquired the Evinrude and Johnson Outboards brands; the FICHT technology was re-engineered into E-TEC direct injection.
Can you still get parts for Evinrude motors?
Yes, we will continue to supply customers service parts as needed and honor our manufacturer limited warranty coverage and extended service contracts.
Who made Evinrude 4 stroke?
Released on the Aussie market about a year ago, the Evinrude 70 is the result of a joint effort between Suzuki and OMC, and is the teaming's first big four-stroke outboard.
What outboards are made in China?
OUTBOARD CARBURETOR Suzuki Outboard (13910-94400 2-Stroke 40, 65, 85, 140 hp. Carburetor SUZUKI / JOHNSON DF40-DF50 HOUSING DRIVE SHAFT BRG REPLACES 56130-94413-0EP ... WUXI IKC MACHINERY BEARING CO., LTD....WUXI IKC MACHINERY BEARING CO., LTD.Diamond Member.Audited Supplier.Jiangsu, China.
Are Suzuki outboards made by tohatsu?
Suzuki makes its own motors. Tohatsu made motors for Mercury, and others.
What is the most reliable outboard motor?
Best Outboard Engines In 2021Suzuki DF90A.Yamaha F25.Suzuki DF25A.Mercury 90-150 FourStroke Lineup.Mercury SeaPro 500HP.Mercury Verado 600HP V12.Torqeedo Deep Blue.Yamaha V-Max SHO 115.More items...•
Does anyone still make 2-stroke outboards?
Today, manufacturers like Mercury Marine have developed 4-stroke outboards that weigh and perform comparably with 2-storke outboards. And by using direct injection techniques, Mercury Marine is also making 2-stroke outboards that are as clean running, smooth and quiet as 4-stroke outboards.
What is the easiest outboard motor to work on?
Two-Stroke Outboard Motors: Since two-stroke engines do not include valves, their construction is simpler and many mechanics argue that they are easier to work on. Additionally, two-stroke engines offer double the power for their size due to the fact that there are twice as many strokes for each revolution.
Is Evinrude a good outboard motor?
Despite their 2-stroke status, Evinrude outboards are marketed as the cleanest on the planet. They do have the distinction of being the first outboard manufacturers ever to receive the EPA's Clean Air Technology Excellence Award.
Are Johnson and Evinrude the same company?
It has been owned since 2001 by the Canadian firm Bombardier Recreational Products. Bombardier stopped selling outboards under the Johnson brand after 2007, and moved all sales entirely to Evinrude Outboard Motors until they were discontinued in June 2020.
Did Evinrude go out of business?
With three new outboard engines that debuted in 2019 and the boating season happening now Evinrude has closed its doors unexpectedly. Even dealers weren't expecting this. The iconic Canadian outboard motor manufacturer is out of business.
Are Evinrude ETEC motors any good?
Not great, but very, very good. For the most part, the engine has always started reliably, and runs like a clock. Over the last 10 years, we've only had two problems that can be attributed to manufacturing or design issues: One fuel injector failed under warranty.
How long does an Evinrude 70 last?
Although there's a timing belt for the overhead cam instead of the chain drive of the Evinrude 40/50, this has a life expectancy of 800 hours.
What is an Evinrude 70?
Released on the Aussie market about a year ago, the Evinrude 70 is the result of a joint effort between Suzuki and OMC, and is the teaming's first big four-stroke outboard. Since its release, this beautifully-smooth and quiet motor which utilises the long-running 1300cc Sierra four-wheel drive powerhead has set new standards for mid-range ...
How many valves does a 1970s powerhead have?
This powerplant utilises many aspects of the 1970's powerhead. It has 12 valves for efficient breathing and a reasonably deep gear ratio to effectively convert engine torque to thrust at the prop. And because of its multipoint fuel-injection with automatic adjustment of the air/fuel ratio according barometric pressure, it's equally at home at sea level or on alpine lakes. The result is a mid-range four-stroke that simply has no peers!
Is the Evinrude 70 the same as the Johnson 70?
Although the Evinrude 70 is designed to compete against 70 hp two-strokes and the Honda BF75, it develops similar torque to the two-stroke Yamaha 90 a fact borne out when I tested the motor recently against its Johnson 70 counterpart (which has the same gear ratio) on the same hull.
Is a 4 stroke better than a 2 stroke?
Considering both the speed and fuel consumption differences, at 4000rpm, the four-stroke returned 14% better fuel efficiency than the two-stroke, while at WOT the efficiency was a whopping 65% better!
Does the Johnson hard over figure eight have prop ventilation?
There was some prop ventilation in hard-over figure of eights whereas none occurred with the Johnson, but quickly trimming in the motor cured most of this.
Do carbie engines run rich?
And if you fish high altitude dams, the motor never runs rich as do carbie engines. Of course, with a carbie motor, smaller jets can be installed if using the motor for extended periods at high altitude.
Who is the CEO of Outboard Motors?
President and CEO José Boisjoli said in the news release, ““Our outboard engines business has been greatly impacted by COVID-19, obliging us to discontinue production of our outboard motors immediately.
Does Mercury Marine still supply E-TEC?
Following the decision to discontinue E-TEC and E-TEC G2 outboard engines, the company has signed an agreement with Mercury Marine to “support boat packages and continue to supply outboard engines to our boat brands. We will continue to supply customers and our dealer network service parts and will honour our manufacturer limited warranties, plus offer select programs to manage inventory. These decisions will impact 650 employees globally.”
Is BRP still making Evinrude outboard engines?
Citing impact from the COVID-19 outbreak, Canadian company BRP makes a surprising announcement that they will cease production of Evinrude outboard boat engines.
What engine does Evinrude use in 2020?
In 2020 Evinrude made upgrades to the 3.4L engines with upgraded cooling passages and an improved cowling material, smooth instead of textured plastic for the frame. And a brand new 3 cylinder 115 to 150 platform was introduced. All signs were pointing to a long term strategy that appeared to be working. The interchangeable colored side panels were a cool innovation on the G2.
What were the mistakes of Evinrude?
On the surface, the mistakes I think they made are that they had too many engines overlapping. When you have the volume Mercury and Yamaha have, it’s possible to overlap but when you are lean and mean you have to operate that way. Evinrude had legacy Etec engines alongside the new G2 engines for too long. They also had HP overlap with two versions of the 150 G2, an etec version, now a 3 cylinder version. They had 2 different 200 versions, 2.7L and 3.4L, and all through the lineup they had models that didn’t add value. That’s one problem.
What does it mean when Evinrude pulls the plug?
Pulling the plug on Evinrude means thousands of jobs are lost which is heartbreaking in itself and it means shutting the door one of the most storied brands in the marine industry . It didn't’ have to be that way.
Is Wave to Wave discontinuing Evinrude outboards?
For one, Wave to Wave intentionally doesn’t do “news” articles for many reasons but sometimes the news is too big to ignore. And, the news that BRP is discontinuing production of Evinrude outboards came as a surprise to many. It’s important to understand that BRP, which owns Evinrude, is fine, they are continuing with their recreational products ...
Is 2.7L a good engine?
For evinru de, execution was pretty good, except for the 2.7L 150 to 200 range, which was probably a make for break for them. The 2.7L was too heavy and gave up the competitive advantages that Evinrude should've had in that segment. Mercury and Yamaha had lighter engines with gear ratios more suitable to that class and so it was difficult to market those engines. This hurt Evinrude sales in a huge segment.
Who was the first person to use an outboard engine?
Unfortunately, at the beach, he had accidentally plugged up the water inlet with mud and seized the engine on the way. It’s a funny story now. Ole Evinrude was the first to market with an outboard engine in 1909. Evinrude over the years has had many game changing innovations and some catastrophic failures.
Does Evinrude have a 3 cylinder engine?
When you have the volume Mercury and Yamaha have, it’s possible to overlap but when you are lean and mean you have to operate that way. Evinrude had legacy Etec engines alongside the new G2 engines for too long. They also had HP overlap with two versions of the 150 G2, an etec version, now a 3 cylinder version.
