Are Harbor Freight Tools worth buying?
The answer is not so simple… Some of Harbor Freight’s tools are not even worth the dirt-cheap price they’re sold for. Other Harbor Freight tools are really decent tools that are worth buying. Stick around, and I’ll show you the best Harbor Freight tools for your money.
What is the quality of Harbor Freight Tools?
We took a look at Harbor Freight’s “Good, Better, Best Drill/Drivers” and discovered they are actually all great tools! The Warrior drill/driver in the “Good” category, priced for the DIYer (or anyone looking for an affordable high-quality tool), stood up to our Family Handyman standards.
What brands does Harbor Freight carry?
What brands does harbor freight carry?
- Rip & Claw Hammers.
- Sledge & Engineer's Hammers.
- Mallets.
- Ball-Peen & Tack Hammers.
- Pry Bars.
- Axes & Hatchets.
What does Harbor Freight sell?
Harbor Freight carries over 4,000 products, specializing in air compressors, generators, wrenches, drills, saws, hand tools, tool storage, welding supplies, and automotive tools. Most Harbor Freight products are sourced directly from manufacturers and are all tested in our own quality assurance facility.
Are Harbor Freight Tools made by Snap on?
Conclusion. Harbor Freight Tools does not own Snap-on tools. Snap-on Incorporated is the current owner of Snap-on Tools Company, while Eric Smidt privately owns Harbor Freight. Both companies operate a similar business model and have been competitors for a long time.
Why are Harbor Freight Tools so inexpensive?
Harbor Freight is able to sell quality tools at prices that are almost always cheaper than the competition because of its business model which began over 40 years ago.
Where do Harbor Freight Tools come from?
Harbor Freight buys tools direct from the manufacturer, so that means you save because they cut out the middle man. Often times Harbor Freight's tools come from the exact factory that other brands buy their tools from – which means quality is just as good as the competition.
Is Pittsburgh a good tool brand?
Pittsburgh tools are known for their unbeatable value and exceptional quality. Some of the hand tools that Pittsburgh makes are screwdrivers, ratchets, wrenches, pliers, and sockets – in addition to many others. Pittsburgh also makes automotive jacks and automotive jack stands.
Is Bauer a good tool?
Bauer tools are great, with sturdy construction that makes them last for long. The good news is that this product line holds very affordable tools and is pretty much available in various Harbor Freight tool stores.
Who owns Harbour freight?
Eric SmidtEric Smidt, Owner and Founder. Eric Smidt is the owner and CEO of Harbor Freight Tools which he co-founded with his father, Allan Smidt, in 1977. Under Eric's leadership, Harbor Freight Tools has become the leading discount tool retailer in the United States with over 1,300 stores and 25,000 associates nationwide.
Who competes with Harbor Freight?
harborfreight.com's top 5 competitors in June 2022 are: northerntool.com, homedepot.com, acehardware.com, lowes.com, and more.
What is Harbor Freight known for?
Harbor Freight is America's leading retailer of quality tools at the lowest prices. Headquartered in Calabasas, California, Harbor Freight operates a chain of retail stores, as well as a mail-order and e-commerce business.
What brands does Harbor Freight own?
Harbor Freight Tools is a private company with headquarters in Calabasas, California....Here is a selection of the brands they own and sell under:US General.Chicago Electric.Central Pneumatic.Central Machinery.drillmaster.HaulMaster.
What is the sister company to DeWalt?
One, a whole bunch of the top power tool brands — including DeWalt, Black & Decker, Craftsman, Porter-Cable and more — are all owned by the same company, Stanley Black & Decker.
Who makes Pittsburgh brand tools?
Pittsburgh tools are made & sold exclusively at Harbor Freight Tools. Our Pittsburgh hand tools and automotive tools are sold across the United States at all 1,100+ Harbor Freight locations and online at harborfreight.com.
Are Harbor Freight Tools lifetime warranty?
Hand Tool Lifetime Warranty We guarantee our Hand Tools to be free from defects in material and workmanship for the life of the product. Limitations apply. Harbor Freight Tools will replace any hand tool that fails to properly work during the lifetime of the original purchaser.
Are Harbor Freight Tools lifetime warranty?
Hand Tool Lifetime Warranty We guarantee our Hand Tools to be free from defects in material and workmanship for the life of the product. Limitations apply. Harbor Freight Tools will replace any hand tool that fails to properly work during the lifetime of the original purchaser.
Does Harbor Freight price match?
There are many benefits to shopping at Harbor Freight, including: Harbor Freight Low-Price Guarantee: If you find the same item selling for less anywhere else, they will match the price.
Are Harbor Freight jack stands safe?
The jack stands may collapse under load, which can increase the risk of injury to people near or under a lifted vehicle. Owners of these jack stands are asked to immediately discontinue use due to safety concerns. Injuries have been reported due to this issue. Affected customers will receive full refunds upon request.
Where is the headquarters for Harbor Freight?
Calabasas, CAHarbor Freight Tools / HeadquartersHarbor Freight Tools, commonly referred to as Harbor Freight, is a privately held tool and equipment retailer, headquartered in Calabasas, California, United States.
What to do if your wrench breaks?
If it breaks while you’re using it, just bring it back to the store and they’ll let you grab a new one off the shelf.
What size blade does a band saw use?
This band saw uses a 62 inch long blade, and accepts widths 1/8 inch to 1/2 inch wide. It has a 9 inch throat, and accepts 3-5/8 inch thick wood work piece.
Is Harbor Freight worth buying?
The answer is not so simple… Some of Harbor Freight’s tools are not even worth the dirt-cheap price they’re sold for. Other Harbor Freight tools are really decent tools that are worth buying.
Does Harbor Freight sell bar clamps?
Harbor Freight sells some really decent bar clamps. In fact, their F-Style Aluminum Bar Clamps with padded jaws are pretty darn good!
Do you need a drill press for a milling machine?
Every workshop should be equipped with a drill press. They are essential for drilling straight holes or tapping a work piece. If you don’t own a milling machine, a drill press will allow you to at least cut straight and clean holes.
Is ether way rated high?
Ether way, both varieties have been highly rated by Harbor Freight shoppers.
Will I be buying another floor jack from Harbor Freight?
Will I be buying another floor jack from Harbor Freight? Heck yes! Their floor jacks offer great quality for the price.
What are some things that Harbor Freight can do for your garage?
Many of Harbor Freight's most useful items make organizing your garage much easier and within a budget. Magnetic wall strips and trays make it easy to quickly stick a few tools and hardware to during a job, so you can spend more time working and less time looking for stuff.
Is it good to have a few extra wrenches around?
It’ s always good to have a few extra sets of wrenches around, and they’re cheap enough to lose a here and there.
Is Harbor Freight creeper comfortable?
While Harbor Freight creepers may not be as comfortable as others, they definitely get the job done for less. Bonus points if you can find the molded plastic ones on super sale—they're definitely worth it!
Does Harbor Freight have impact sockets?
Harbor Freight has a wide variety of black impact sockets, and they aren’t too shabby. We have yet to break one with our compressor, and they’re thin-walled enough to take lug nuts off too. Another good “extra” set to have in your arsenal.
Does Harbor Freight have a compressor?
The big ticket items, although seemingly comparable, just don’t last as long as their more expensive counterparts. Harbor Freight's compressors are no exception to this. We would rather pay somebody on Craigslist for their used DeWalt any day.
Is a harbor freight cart a good investment?
Harbor Freight tool carts, however, are a good investment. These are usually worth the price, and make bigger projects in the garage easier to manage.
Does Harbor Freight have a reciprocating saw?
Everyone has heard of a Sawzall, but Harbor Freight has their own, more affordable, version of a reciprocating saw that we’ve used before, and it works just as well. Most situations that warrant this tool aren’t emergency situations, enabling us to leave it's longevity more up to fate.
What is the Chinese air tool called?
For their inexpensive, thrice-yearly-use Chinese air tools, we call them, “INGERSOLL-CHAN.”
Why do people use HF?
Some people use HF purchases to help them decide whether it makes sense to invest more money in a higher quality tool. If they use it enough to break it, then go for it. If not, then they saved the cost of the more expensive name brand. This can be pricey, but… if you buy TOO MUCH tool then you’ve wasted money also.
Do cut off wheels last long?
Grinding and cut off wheels don’t last long. Even the good ones are gone way too fast. A couple weeks back I burnt up 3 cut-off wheels in no time cutting stakes out of rebar. At $2 or so apiece, it really doesn’t take long to get frustrating. At around $ .80 each the HF offerings are pretty hard to pass up. Do they last as long as the higher end ones? Not exactly, but they are really comparable and can really reduce the cost on a cutting project.
Does HF have floor jacks?
Like them or hate them, HF has some fantastic floor jacks. I’ve heard the argument 500 times “I wouldn’t trust my life to a HF jack”. Well, I hate to be the bearer of bad news, but if you trust your life to ANY jack, whether it’s a HF or a $600 Hein-Werner, you’re an idiot. ALWAYS USE JACK STANDS! Whether you like HF or hate them, their jacks are very nice, especially when you consider the price. Steel, aluminum, bottle, or ATV, doesn’t matter, they do jacks well and it’s the best value on the market.
