Can you buy polymeric jointing sand at Home Depot?
Asked by Doctorj May 22, 2020. 1. Answer. Hi there, it looks like this Hardscapes 50 lbs. Polymeric Jointing Sand is a store exclusive item and only able to be bought in a Home Depot store. Unfortunately we do not sell it with online stock for purchase.
What is polymeric modified sand used for?
Polymeric Jointing Sand is a polymeric-modified graded sand for filling joints up to 2 wide between interlocking pavers, brick, natural stone and concrete slaps. Simply sweep the sand into the joints and saturate with a water mist. The polymer modified sand hardens as it dries.
What is the best joint stabilizing sand for pavers?
1 BEST OVERALL: DOMINATOR Natural Joint Stabilizing for Pavers 2 BEST BANG FOR THE BUCK: Sakrete Paver Set Joint Sand 3 UPGRADE PICK: Alliance Gator Maxx G2 Intelligent Polymeric Sand 4 BEST FOR SMALL PROJECTS: DOMINATOR Joint Stabilizing for Pavers 5 ALSO CONSIDER: Buddingco Polymeric Sand
How much area does a 50 pound bag of polymeric sand cover?
This 50-pound bag of polymeric sand covers up to 85 square feet. It works on tight joints as well as joints as wide as 4 inches. This polymeric sand comes in black and beige. The G2 Intelligent Polymeric sand features a no-dust, haze-free formula that’s strong, durable, and easy to install.
When should you not use polymeric sand?
#6 - Too Narrow or Too Wide Joints The sand is simply pushed out of the joints. This is why we don't recommend using polymeric sand on extremely narrow joints. Similarly, too-wide joints can lead to washout, because they allow too much water flow during the activation process.
How much does a 50 lb bag of polymeric sand cover?
When filling small gaps, a 50lb bag of polymeric sand will usually cover 75-100 ft2. When filling wide gaps of 1/4″ to 3/8″ a 50lb bag will usually cover 30-60 ft2.
What can I use instead of polymeric sand for pavers?
When looking for alternatives to polymeric sand, you will also want to find high quality materials. There are other products, such as EnviroSAND, EnviroSTONE and EnviroPATH on the market that are able to stop water erosion from occurring.
What is the best polymeric jointing sand?
The Best Polymeric Sand of 2022Buddingco Polymeric Sand.Best Overall. DOMINATOR Natural Joint Stabilizing for Pavers.Best Value. Sakrete Paver Set Joint Sand.Upgrade Pick. Alliance Gator Maxx G2 Intelligent Polymeric Sand.Best For Small Projects. DOMINATOR Joint Stabilizing for Pavers.Also Consider. ... Best Overall. ... Best Value.More items...•
What is an alternative to polymeric sand?
Builder's Sand Builder's sand is the most common replacement for polymeric sand, as it is easy to access and not expensive. It is used heavily in construction projects, hence its name. Because this sand is very coarse, you will need to use it regularly.
How long does it take polymeric sand to set?
Best appearance is achieved by eliminating all polymeric jointing sand from surfaces. A minimum of 24 hours drying time is required prior to allowing foot traffic and 48 hours for vehicular traffic on the paver surface.
How large of a gap can you fill with polymeric sand?
How Big a Gap Can Polymeric Sand Fill? Polymeric sand works best to fill gaps between 1/4 inch and 1.5 inches wide. Wider joints will require more time to harden. Some pavers are designed to fit together like puzzle pieces – if the gap is too small, polymeric sand won't help.
Should I seal my pavers before polymeric sand?
Traditionally, concrete paver manufacturers have recommended waiting at least 90 days after polymeric sand installation to apply a protective sealant to a paver surface. Nowadays, a 30 day delay is sufficient to allow the evaporation of any remaining natural efflorescence contained in the pavers.
What to use to fill in gaps between paving slabs?
Filling large gaps between paving slabs can be easily achieved with wet brush-in joint filler or polymeric sand. Wet brush-in filler is more flexible, making the joints less susceptible to cracking as the temperature changes throughout the year.
Can you put dry cement between pavers?
Using dry mortar that way saves a tremendous amount of time compared to mortaring individual joints between pavers, but the dry mortar has to be applied in dry conditions to prevent it from staining the pavers' surface.
Is polymeric sand necessary?
Polymeric Sand is as ubiquitous to interlocking pavers as garden soil to gardening. You need good garden soil to grow your vegetables and plans. You need good polymeric sand to maintain the look and appearance of your landscape.
How deep should polymeric sand be?
1 ½”Polymeric Sand needs a minimum depth of 4 cm (1 ½”) to be effective. Use a power washer to empty the joints. If there is already polymeric sand between the pavers, soak the sand to soften it up before emptying the joints.
Will water drain through polymeric sand?
Polymeric sand, if installed properly, will harden to lock you pavers in place and create a more effective weed and insect deterent while still allowing water to drain freely.
Why is my polymeric sand not hardening?
Polymeric sand cures by drying. And in order to fully set, it needs to dry out completely. If your polymeric sand didn't harden up, it's pretty much guaranteed there's a moisture issue. If the joints remain wet after the installation, they will remain soft until they dry.
What is the best sand to put between pavers?
Polymeric sandPolymeric sand is a material used to fill paver joints, the empty spaces found between each paver, tile or natural stone. It is sometimes called jointing sand, paver sand or hardscape sand.
Can I make polymeric sand?
By mixing ConSANDtrate at a ratio of 5 parts sand to 1 part ConSANDtrate makes a more concentrated polymeric sand that can be used around problem areas or as a crack filler for concrete or exposed aggregate slabs.
How do you harden sand between pavers?
As we brought up earlier, regular sand doesn't harden enough on its own. So, if you need it to set, the best way to do it is by sealing them. You should give it at least 48 hours after applying the sealer. Foot traffic is ok after 3-4 hours.
Why does polymeric sand fail?
Epic Fail #1: Too much or too little watering. A polymeric sand installation requires the use of a controlled and methodical watering technique. Using too much water can cause the sand to wash out of the joints. On the contrary, using too little can result in the product not setting up properly.
Can I pressure wash polymeric sand?
You can't pressure wash and apply polymeric sand on the same day. I should warn you that getting the stain off is a huge problem so it's best to take the time to avoid it in the first place.
Can weeds grow through polymeric sand?
When properly installed polymeric sand is very weed resistant. There are many factors that can lead to early failure of the sand such as not getting sand deep enough into joints, applying too much OR to little water to activate, paver systems that hold too much moisture, hills, and a lot more.
How many bags of sand do I need for pavers?
The depth being 1-inch, which is equivalent to 1/12 foot, all you really need to do is to divide the total area in square foot by 12. That's how much sand you need. Find out the total area in square feet, divide by 12, and voila, that's how much sand you need for a 1-inch layer.
Is polymeric sand better than regular sand?
Polymeric sand is the more reliable and durable option for filling in the paver gaps. It outperforms regular sand when a homeowner is looking to lock the paver joints properly and wants a steady and stable path. It also provides a better appearance with its cleaner look and availability in varied colors.
Is polymeric sand the same as stone dust?
The main difference is in the size of the primary materials, stone dust versus sand. Gator dust bond base material is stone dust, much finer than regular jointing sand. It is designed to stabilize wider paver joints than polymeric sand.
How do you install polymeric sand for pavers?
1:565:20How to use Polymeric Sand - YouTubeYouTubeStart of suggested clipEnd of suggested clipStep 1 clean the surface with broom. And blower to remove all dust and debris from the surface. StepMoreStep 1 clean the surface with broom. And blower to remove all dust and debris from the surface. Step 2 open the bag and spread the sand evenly over the surface.
What is polymeric sand used for?
Before starting a patio paver project, understand that polymeric sand is used for joints (the spaces between pavers) that are 1 inch or smaller. The polymeric sand drops into these cracks easily and provides the protection necessary to resist water, grass, weeds, and insects.
What is dominator polymer sand?
DOMINATOR polymeric sand features the company’s Solid-Flex formula, made from a fine sand and free of cement. This allows the sand to flex while remaining durable and water resistant.
How many square feet does dominator sand cover?
This product comes in a 45-pound bucket that can cover up 80 square feet of paver surface, depending on the size of the joints. DOMINATORS’s poly sand comes in several colors including natural hue, titanium, charcoal, taupe, and carmel.
How to make a paver with polymeric sand?
Using a wide push broom, spread the polymeric sand out until it fills the joints around the pavers evenly. The sand should come to within ⅛-inch of the top of the paver. If the pavers have beveled edges, fill to the bottom of the bevel. Using a hand or plate tamper, tamp the sand into place.
How long does polymeric sand take to dry?
Most polymeric sands are ready for foot traffic after 24 hours. If it’s a driveway, wait 48 hours before parking a vehicle on it. Note, these drying times assume you’ve got sunny weather. Check the forecast before installing polymeric sand; if it rains before the polymeric sand dries, it will wash out to the top of the pavers, and you’ll have a mess on your hands.
What is the best material to fill gaps between pavers?
This can leave your carefully laid pavers looking messy and uneven. To keep pavers in place, you need polymeric sand. Polymeric sand is a material used to fill the paver joints, which are the empty spaces between each paver. It’s sometimes called jointing sand, paver sand, or hardscape sand.
What is a jointing sand?
It’s sometimes called jointing sand, paver sand, or hardscape sand. Coated with a water-activated polymer, the grains of polymeric sand stick together when dampened, producing a seal that looks like grout and makes a stronger joint than standard filler sand. The result is a longer-lasting paver installation.
