Knowledge Builders

does nitromors remove water based paint

by Russel Shanahan Published 2 years ago Updated 1 year ago
image

The new Nitromors products work but not as quickly or dramatically as the old formulations and, of course, a lot depends on the paint. If you have water based paints the old formulation wouldn’t touch it, but this new product will remove it – albeit without the bubbling and blistering.

The new Nitromors products work but not as quickly or dramatically as the old formulations and, of course, a lot depends on the paint. If you have water based paints the old formulation wouldn't touch it, but this new product will remove it – albeit without the bubbling and blistering.Mar 11, 2016

Full Answer

Do Nitromors really work?

The new Nitromors products work but not as quickly or dramatically as the old formulations and, of course, a lot depends on the paint. If you have water based paints the old formulation wouldn’t touch it, but this new product will remove it – albeit without the bubbling and blistering.

Is Nitromors paint and varnish remover safe?

They came up with the new formulation which was according to the guidelines and was completely safe not only for painters but also for nature. Nitromors All Purpose Paint and Varnish Remover is a powerful stripper that can act fast and remove layers of paints, lacquers, and varnishes from the surfaces (such as metal, wood, and masonry) in no time.

Is Nitromors being discontinued?

Nitromors is being discontinued as a brand from January 2021, we will continue to supply this product while we have stocks Nitromors All Purpose Paint and Varnish Remover is a fast acting, double strength paint stripper to make the removal of paint, varnish and lacquer quick and easy.

How long does it take for Nitromors to work on paint?

After you have tested the product, it’s time to apply the thick coat (about 2-3mm) of the formulation on the intended surface using a brush. Wait for about 10 minutes, which is usually the time Nitromors remover takes for blistering the paint.

image

What takes out water based paint?

Mix two tablespoons of household ammonia in one cup of water. Apply it to the stain and leave it for less than a minute. Blot using soft, absorbent, white material such as paper towel or napkin. Apply a small amount of Paint-Oil-and-Grease (POG) remover (available in hardware stores).

Is there a paint stripper for water based paint?

Water-Based Non-toxic Paint Remover Suitable for Architectural Coatings. Nu-EcoSafe Strip Architectural is a brushable water-based paint remover that is biodegradable, non-toxic, user-friendly and environmentally safe. It is extremely effective in removing architectural coatings.

Will Nitromors remove paint?

Nitromors is designed to remove paint and varnish without damaging wooden surfaces underneath.

How do you remove old water based paint from walls?

0:271:59Home Improvements : Removing Old Wall Paint - YouTubeYouTubeStart of suggested clipEnd of suggested clipYou're going to paint over it anyway right so here we go first thing you're going to do you're goingMoreYou're going to paint over it anyway right so here we go first thing you're going to do you're going to need putty knife and joint compound and the sanding block first thing you're going to do is you'

What is the easiest way to remove water based paint?

Steps to Remove the Paint:Begin by filling a bucket with warm water and adding a small amount of soap.Agitate the water until suds begin to form.Moisten the soft cloth with the soapy water and wipe the areas with paint. ... If the paint is removed, rinse the area with clean water and allow it to dry.More items...

What is the best water based paint remover?

The best paint stripperBest Overall: Citri-Strip Paint and Varnish Stripping Gel.Most Eco Friendly: Dumond Smart Strip Advanced Paint Remover.Fastest Working: Sunnyside 2-Minute Advanced Paint Remover.Most Family Friendly: MAX Strip Paint & Varnish Stripper.Most Heavy Duty: Dumond Peel Away 1 Heavy-Duty Paint Remover.

What has happened to Nitromors?

Nitromors was one of the most famous brands in the decorating industry. Then, due to EU legislation banning methylene chloride, it disappeared off the shelves.

How long do you leave Nitromors on for?

Do not brush out. Only apply to areas up to 0.5m². When paint has blistered (5-10 minutes) apply second coat, working into blisters. Leave for 40 minutes.

What is the best paint stripping product UK?

The Best Paint Strippers For Wood Available In The UKOur Pick. SEEKONE hot air gun.Best Alternative. VonHaus heat gun.Nitromors All Purpose Paint and Varnish Remover.Rustins Strypit paint and varnish stripper.Bahco 665 Carvide Edged H/Duty Paint Scraper.

Does white spirit remove water based paint?

water based paints are hard to remove once dry, but won't be removed with white spirit.

How do you remove water based paint from wood without sanding?

0:121:08How to Remove Paint from Wood Without Chemicals or SandingYouTubeStart of suggested clipEnd of suggested clipMove the gun back and forth until the paint begins to blister holding a putty knife at a 30-degreeMoreMove the gun back and forth until the paint begins to blister holding a putty knife at a 30-degree angle scrape off the old paint being careful not to gouge the old wood.

How do you remove water based undercoat?

To remove water-based paints from clothing, follow these steps:Scrape off as much excess dried paint as you can with a spoon, dull knife or brush.Flush the back side of the stain with warm running water. ... Saturate the stain with a mix of half detergent, half warm water and blot it vigorously with a rag or paper towel.More items...

What is the best product for stripping paint off wood?

Best Overall: Citristrip Paint & Varnish Stripping Gel Plus, it can be used on several types of surfaces—wood, metal, and masonry, including brick and concrete—removing several layers of paint in one go.

How do you remove water based paint from carpet?

How to remove water-based paint stains from carpet:If the paint stain is still wet, simply blot the spot with a wet paper towel - don't scrub, just blot.If the paint stain is dry, use hot water and a little bit of dish detergent. ... Once the paint is softened, use a knife or pin to scrape the paint stain.More items...

Does mineral spirits strip paint?

Mineral spirits are a more versatile all-around cleaner. Mineral spirits can be used to remove paint as well as oils, tar, or gunk from larger surface areas such as garden shears and saws, metal and wood worktops, and even concrete floors.

What is the safest paint stripper to use?

Like soy-based gels, they work more slowly in removing paint and coatings than more toxic products. Though these first two options, SoyGel and Citri-Strip, are the best (most effective) paint strippers on the list.

What is Nitromors paint remover?

Nitromors Paint and Varnish Remover is one of the most famous brands in the decorating industry. It has been around since the 1930s and has been used to remove many paints, varnishes and other coatings.

Can Nitromors be used on windows?

However, Nitromors is a non-drip gel consistency and can, therefore, be used on indoor vertical surfaces such as doors, stair spindles, and window frames etc.

Can you wrap paint in newspaper?

If you catch the Nitromors and paint in newspaper you can then wrap it up and dispose of it in an environmentally responsible manner. The whole process is a lot less intrusive than burning or sanding but should be done with the windows and doors open to provide good ventilation.

What is Nitromors?

Nitromors is a high-strength, all-purpose paint and varnish remover that’s designed for DIY use on wood, metal and masonry. It uses gel technology to break down and blister paint and varnish so that it can then be easily removed. It’s even water washable so that you can easily clean up after you’ve used it.

What is nitromors varnish?

Nitromors is designed to remove paint and varnish without damaging wooden surfaces underneath. Even when Nitromors is used in thick layers (as instructed), wood should remain undamaged.

How long to leave nitromors on bolstered wood?

Leave for 5-10 minutes to allow the paint or varnish to blister and then apply a second coat of Nitromors to the bolstered surface.

What are the ingredients in Nitromors?

The main active ingredients of Nitromors previously included dichloromethane (which was the main ingredient) and methanol. However, the ingredients changed in 2009 when the EU introduced legislation banning methylene chloride – a solvent that Nitromors had previously used in their formulation. The current version of All Purpose Nitromors no longer contains dichloromethane.

How to remove blistered paint from a wall?

Remove the blistered paint or varnish using a scraper – or wire wool to remove any stubborn paint.

How to get the best results from paint?

To achieve the best results for your new paint, apply a primer to the surface first so that the paint can easily bond to it

What to wear when handling Nitromors?

Always wear protective gloves and safety goggles when handling Nitromors.

What is Nitromors paint stripper?

Nitromors All Purpose Paint and Varnish Remover is a fast acting, double strength paint stripper to make the removal of paint, varnish and lacquer quick and easy. It is suitable for use on wood, metal and masonry surfaces and the non-drip formula means it is perfect for vertical surfaces.

How many layers of paint can be removed from wood?

In a single application, 5 layers of paint can be removed within 50 minuets with the top coat blistering within 5 minuets. With just 2 - 3 applications, 15 layers can be removed from wood to bring it back to bare wood.

How long does it take for paint to blister?

Once paint is blistered (5 - 10 mins) apply second coat working into blistered paint. Do not attempt to remove paint yet, leave around 40 mins for it to work. Then remove blistered and soft paint with a scraper or shave hook.

diana-w New Member

I have recently used Nitromors to strip some wooden windowsills; very successful. However, when I applied the Nitromors to the wood I managed to get some on the UPVC plastic window frame. When I stripped the paint on the sill and wiped it down I noticed that window frame was now stained in places with the green tint from the Nitromors.

enc Active Member

I used this stuff to successfully remove splashed wood preserve from upvc French doors .. nothing else would touch it.

diana-w New Member

I used this stuff to successfully remove splashed wood preserve from upvc French doors .. nothing else would touch it.

Dr Bodgit Super Member

Cellulose thinners is very aggressive, it might make things worse but you never know...if all else fails.

KIAB Super Member

Cellulose thinners is very aggressive, it might make things worse but you never know...if all else fails.

How does solvent based paint remover work?

The ingredients work by swelling the paint and weakening the adhesion of the paint to the surface. The solvent based paint stripper category also includes water based technology as water would be the ‘solvent’ in these products. Most will also contain small amounts of solvent in their chemical make-up but nowhere near as much as solvent based products.

What Type of Paint Stripper to Use?

Whether you need to use caustic or solvent paint stripper depends entirely on the coated surface, what paint has been used and the condition of the coated surface.

What is the best paint remover for wood?

Caustic paint removers are good to use to remove thick layers of paint and are great to use on surfaces with detailed moulding due to its consistency. However, you do run the risk of staining or scorching the wooden surfaces for example, whereas solvent based removers do not stain or damage the surface.

What is the chemical in paint strippers?

Historically, solvent based paint strippers used to contain an ingredient called methylene chloride. As this chemical compound posed many different health risks, the European Union banned the use of this chemical in paint strippers for consumers in 2010. The use of methylene chloride products is now restricted to workshops only, ...

How to avoid skin rash from paint strippers?

When you are working indoors, ensure you always work in well ventilated areas and wear breathing apparatus where appropriate. Take care to avoid skin contact. Paint strippers can irritate your skin and can occasionally cause more than just a rash. Wear suitable gloves and other protective clothing.

Can paint stripper get into eyes?

Protect your eyes and ensure no paint stripper gets into them, as it can cause serious damage.

Is it safe to use paint strippers?

More importantly, when using any type of paint stripper, it is important to be aware of some basic health and safety considerations. Paint strippers contain chemicals and thus there are inherent dangers when dealing with them.

image

1.What is Nitromors Paint Remover - How to Use it Correctly?

Url:https://repaintnow.com/nitromors/

18 hours ago Step 5. Stripping. If all seems perfect, remove the softened and blistered paint using a stripping knife. For stripping difficult areas like corners, make use of a tool like a shave hook or your old nylon toothbrush. If you still see any traces of paint left …

2.How To Use Nitromors – All You Need To Know

Url:https://www.checkatrade.com/blog/how-to/use-nitromors/

3 hours ago The new Nitromors products work but not as quickly or dramatically as the old formulations and, of course, a lot depends on the paint. If you have water based paints the old formulation wouldn’t touch it, but this new product will remove it – albeit without the bubbling and blistering.

3.Nitromors All Purpose Paint and Varnish Remover

Url:https://www.decoratingwarehouse.co.uk/nitromors-all-purpose-paint-and-varnish-remover

30 hours ago Here’s a quick summary of how to use Nitromors: Remove the overcap and prepare to fill it. Pour the Nitromors into the overcap (and immediately replace the cap on the Nitromors bottle). Apply a thick coat (2-3mm) onto the paint or varnish you want to remove, using a dabbing action to areas of up to 0.5m2. Leave for 5-10 minutes to allow the ...

4.Nitromors | Screwfix Community Forum

Url:https://community.screwfix.com/threads/nitromors.183779/

7 hours ago  · The new Nitromors products work but not as quickly or dramatically as the old formulations and, of course, a lot depends on the paint. If you have water based paints the old formulation wouldn’t touch it, but this new product will remove it – albeit without the bubbling and blistering. The younger generation of painters and decorators will ...

5.Paint Removal Guide: Caustic vs Solvent Based Paint …

Url:https://www.rawlinspaints.com/blog/paint-removal-guide-caustic-solvent-based-paint-strippers/

15 hours ago Does Nitromors remove water based paint? The new Nitromors products work but not as quickly or dramatically as the old formulations and, of course, a lot depends on the paint. If you have water based paints the old formulation wouldn’t touch it, but this new product will remove it – albeit without the bubbling and blistering.

A B C D E F G H I J K L M N O P Q R S T U V W X Y Z 1 2 3 4 5 6 7 8 9