See more
How do you install Trex lattice?
1:212:33Freedom Plastic Lattice Installation - YouTubeYouTubeStart of suggested clipEnd of suggested clipAlong the top drill and fasten every 24 inches drill holes and hang through both molding and panel.MoreAlong the top drill and fasten every 24 inches drill holes and hang through both molding and panel. Along the sides and bottom drill holes and put screws through molding.
Can you cut Trex lattice?
Cellular PVC lattice can be cut using the same blades as wood. It shouldn't be cut with plywood or metal cutting blades. If the blade is creating too much friction or if the sheet isn't properly supported, rough edges or uneven cuts may occur. Standard wood drill bits should be used.
What can I use instead of lattice on a deck?
To add to the beauty and practicality of your under-deck space, consider one of these eight alternatives to using deck lattice.Create a Room for Storage, Entertainment, or Relaxation. ... Skirt with modern wood slats. ... Install shiplap. ... Create a patterned look. ... Go for vertical lines. ... Complement a Craftsman.More items...
Does azek make lattice?
Simple, yet elegant, this solid 72" H frame blends beautifully with any style home. It has 8" sq. H/V lattice opening.
How do you keep vinyl lattice from buckling?
To prevent this aggravation, place the channel around the lattice first. Then put the lattice in the desired location. Now, you can either screw through the bottom of the U on the channel directly to the post or rail, or you can screw through the channel and lattice to the post or rail.
Does Home Depot cut wood lattice for you?
No, Home Depot will not cut the wood for you if you purchased it elsewhere. In order to take advantage of this free service, the wood must be purchased at Home Depot.
What do I close the bottom of my deck with?
Using an Open Style Wire mesh is an inexpensive material to use to seal off below a deck. It will prevent animal access to the area below your deck, but it will not form a visual barrier to the area. One option is to seal off the area with wire mesh, then use landscape plants to hide the wire.
What is the purpose of lattice under deck?
This enclosure conceals the framing while it also allows air to circulate under the porch floor, which keeps the framing dry and free of rot. A skirt typically consists of a lattice panel set into a wood frame.
How do you add lattice to a deck?
InstructionsMeasure and Cut the Stringer. With the tape measure, measure the inside distance between two of the deck posts. ... Install the L-Angles. ... Install the Stringer on the Deck. ... Measure the Coverage Area. ... Cut the Lattice to Size. ... Attach the Lattice to the Deck. ... Attach the Moulding Around the Lattice.
What sizes does Lattice come in?
The laths can vary in size but mostly range between 6mm (7/32″) thick to 12mm (1/2″) thick and between 12mm (1/2″) wide to 50mm (2″) wide. The gaps between the laths can also vary greatly in size and usually depends on what the lattice is used for (privacy, windscreen, to support plants, vines etc.).
What thickness does azek come in?
” and 1.5”Thicker boards are often called a 2 x 6 when referring to traditional lumber, which means the actual thickness is somewhere between 1.2” and 1.5”. Thicker deck boards, like TimberTech® AZEK® MAX boards (1.5” thick) can give you a sturdier underfoot feel.
What is azek made of?
AZEK decks are made from polyvinyl chloride, or PVC, which is the same material used in vinyl siding. AZEK decking is known for its exceptional strength, durability, and low maintenance. Since it doesn't contain any wood or wood by-products, AZEK boards don't absorb moisture that can cause wooden boards to warp or rot.
Do you need a special saw blade to cut composite decking?
Cutting composite decking is similar to cutting normal lumber; it just requires special saw blades. So when cutting composite decking, it is advisable to use saw blades that are convenient and flexible for cutting. The saw blades must also be sharp.
What kind of blade do you use to cut Trex decking?
Diablo's TrexBlade is the only recommended composite decking by Trex Company when cutting composite decking materials. These new blades deliver maximum performance and highest quality of finish; making it a 'must-have' tool for both professionals and DIYers planning composite decking projects.
How do you cut notch in Trex decking?
0:172:18Notch Around Deck Posts Like A Boss - YouTubeYouTubeStart of suggested clipEnd of suggested clipThe notch will have to be about a quarter inch bigger than these marks. And he wants to round theMoreThe notch will have to be about a quarter inch bigger than these marks. And he wants to round the corners so Ben uses a half-inch Brad point bit to simultaneously measure and Mark the corners.
What is the best way to cut composite decking?
0:352:11How To Cut NeoTimber® Composite Decking Boards - YouTubeYouTubeStart of suggested clipEnd of suggested clipFor the cleanest and easiest cuts. We always recommend equipping your jig saw with a sharp carbideMoreFor the cleanest and easiest cuts. We always recommend equipping your jig saw with a sharp carbide tip blade.
What color is Trex lattice?from trexlattice.com
Trex Lattice comes standard with a smooth matte white or black finish that is ready to provide many years of carefree enjoyment and beauty. Trex Lattice can also be finished with our exclusive ColorLast finishing process. ColorLast allows you to coordinate your lattice with your decking and railing and includes a 20-Year Limited Warranty.
What is the maximum expansion gap for lattice sheets?from trexlattice.com
Expansion gaps of ¼” are recommended around the perimeter of all lattice sheets.
Can you use silicone adhesive on lattice sheets?from trexlattice.com
Sealants and adhesives alone are never enough to fasten lattice sheets. Silicone adhesives should not be used .
Can you install wood lattice?from trexlattice.com
If you can install wood lattice, you can install low-maintenance cPVC lattice. No special skills or tools are required - just a few considerations when working with this superior sheet material to ensure fewer callbacks for contractors and a long low-maintenance life for homeowners.
Do you need a dust mask for Trex lattice?from trexlattice.com
With Trex Lattice you won't have to worry about rot, insect infestation, or annual painting or staining to keep your lattice looking great. For safety, a dust mask and safety glasses should always be worn when working with cPVC lattice.
What is Trex lattice?
The Trex decking lattice is made from the same material as the decking so it has the same characteristics give it lifelong longevity.
What is Trex decking made of?
What Trex decking is, though, is a composite material that is made from recycled materials such as wood fibers, plastic, and a bonding agent designed to hold it all together. What you are left with is something that looks a whole lot like wood, but which is a good deal stronger and sturdier.
What does Trex look like?
Trex Decking Looks Like Plastic. Today this is a myth, but was not back in the day. When Trex decking first made its appearance, it did not resemble real wood and did have a plastic look. After decades, production has been fine-tuned and Trex decking now looks like real wood.
How long does Trex decking last?
With Trex Decking there are a few do’s that you want to follow to make sure installation goes well and that the product lasts for years. Of course, just like everything, there are the don’ts that you want to avoid so your Trex Decking stays looking superior. Renovating your home is always a good idea.
Can you sand a Trex deck?
There are many companies that offer products that can be effectively used on your Trex deck in order to get rid of termites and other insects. Don't Perform Sanding. Sanding is considered important or even necessary for traditional wood decks, however extensive sanding of composite decking should always be avoided.
Is Trex termite free?
Things NOT to Do With Trex. Don't Use Dangerous Insecticides. Even though Trex is relatively termite free as compared to wood decks, there are always chances for it to be infected by insects. Look for small holes on the surface and if you find a few, then it’s time to call a professional to get rid of the insects.
Is Trex a good material for a deck?
Choose Good Quality Material. When it comes to investing in building a composite deck at your house, it is always better to build a deck with Trex, as Trex is one of the most durable and efficient composites for decking.
Find the perfect deck color that speaks to you
Bring the colors of nature to your outdoor living space. Explore our array of composite decking color options.
Island Mist
A cool medley of calming silver tones, Island Mist mimics the weathered look of driftwood, with its true-to-nature vibrancy and realistic grain pattern.
