Diameter Download Article
- 1 Lay your rim on a flat, stable surface and get a measuring tape. ...
- 2 Pull the measuring tape across so that it bisects the rim. ...
- 3 Measure the distance from the exterior edge of the lip to the barrel. ...
- 4 Subtract the height of the lip from the diameter twice to get the correct diameter. ...
How do I measure my ATV's bolt pattern?
When measuring your ATV's bolt pattern you will want to check both the front and rear. Some ATV models use a different bolt pattern on front and back so you'll want to double check yours before purchasing new wheels. You can also view our ATV Bolt Pattern guideto find out.
How do you measure the offset of an ATV wheel?
Understanding ATV Wheel Offsets. For example: An ATV wheel with a 4+3 offset will measure 4" from the inside lip to the center of the rim where the hub and rim meet, and then it will measure 3" from the hub to the outside lip. The two numbers added together will total the overall width of the rim.
What do the numbers on an ATV wheel mean?
In the order that they appear, the numbers represent rim size (diameter and width), wheel offset and bolt pattern. The first set of numbers that you will see in an ATV wheel size (12x7 from the example) is the diameter and width of the wheel.
How do I know what size my ATV tires are?
It uses three numbers to sum up the size: If you see a tire size that looks like this: 205/80R12, you know you’re dealing with metric. The metric format is exceedingly rare for ATVs and odds are you’ll never come across it.
What size is the rim on an ATV?
Basically, your quad will typically fit into one of few categories: Sport quads—20 to 25 inches. Utility quads—24 to 28 inches. Factory mud or rock equipped quads—27 to 30 inches.
How do you read a rim size?
0:583:02How To Understand Wheel Specs - YouTubeYouTubeStart of suggested clipEnd of suggested clipThe second number is the diameter of an imaginary circle in inches or millimeters that runs throughMoreThe second number is the diameter of an imaginary circle in inches or millimeters that runs through the center of each of the studs or in this case 170 millimeters on a 4 6 or an 8 lug wheel.
What does a 3/4 offset mean?
1:286:29Understanding ATV and UTV Wheel Offset - YouTubeYouTubeStart of suggested clipEnd of suggested clipBasically now explaining that offset part where's the 4 come in and where does the 3 come in rightMoreBasically now explaining that offset part where's the 4 come in and where does the 3 come in right the four plus three means the backspacing.
How is ATV measured?
Measure the tallest point of your ATV from the ground up.Length. Measure from left to right across the longest part of your ATV. ... Measure from left to right across the widest part of your ATV, including tires but not including any side mirrors.Measure the tallest point of your ATV from the ground up.
What do the numbers on rims mean?
Made up of two numbers, the bolt pattern indicates how many bolt holes a wheel has, as well as the diameter of the imaginary circle those bolt holes create. In our example, 4-100, the wheel has 4 lug holes around a 100mm diameter circle. Keep in mind, the second number can be given in both inches and millimeters.
What does 17x7 mean for rims?
Wheel sizes are defined with the calculation: (diameter x width), so that a 17” diameter wheel might be 17x7”, 17x7.
What offset do I need on my ATV?
For straight rear axles, ATV riders will need to make sure that their wheel offset is correctly balanced. The front and rear axles need to be mirror images of their size, for example: 12 inch rims- the front wheels will need to be 5+2 or 4+3, and the rear wheels need to be 2+5 or 3+4.
Does wheel offset matter for ATV?
Offset is important because it can make your vehicle's stance wider or narrower which can affect handling, performance, or can possibly cause clearance issues. If you see a portion of an ATV wheel size that includes a plus sign (+), this is its offset.
Do all ATV rims have the same bolt pattern?
Some ATV models use a different bolt pattern on front and back so you'll want to double check yours before purchasing new wheels.
How do you measure the bolt pattern on a 4 lug ATV?
0:282:27How to Measure an ATV / UTV Bolt Pattern - YouTubeYouTubeStart of suggested clipEnd of suggested clipSo if you can just get your tape measure measure from the center of this first hole to the center ofMoreSo if you can just get your tape measure measure from the center of this first hole to the center of the next hole. Looks to me like it's just over four and a quarter.
How do you read the offset on an ATV rim?
0:092:29How to measure ATV/UTV wheel offset - YouTubeYouTubeStart of suggested clipEnd of suggested clipA lot of people and confuse me for quite a while until I really understood how it works so here's aMoreA lot of people and confuse me for quite a while until I really understood how it works so here's a little bit of what you want to look for when it comes to offset. So when you're buying a wheel if
What ATV has 4 110 bolt pattern?
The most popular ATV brands like Honda, Suzuki Can Am, Polaris, Kawasaki and Arctic Cat all have models that ride on 4x110 bolt pattern wheels. For commanding off road, the Vision Commander is the way to go.
How do I identify my rims?
0:051:30Rim markings decoding Hints from Oponeo™ - YouTubeYouTubeStart of suggested clipEnd of suggested clipTo get desire to rim stiffness manufacturers implemented humps humps design marking is generallyMoreTo get desire to rim stiffness manufacturers implemented humps humps design marking is generally located at the end of alphanumeric symbols. There are a few different patterns for different rims.
What does the J mean in rim size?
tyre bead profileThe letter “J” means a tyre bead profile. This is the marking used to define the wheel collar profile you should never ignore. Wheel collars and tyres must be compatible.
How do you measure a tire rim?
0:062:05How to Measure Tire Rim Size - YouTubeYouTubeStart of suggested clipEnd of suggested clipHere is your sidewall height and a 17 on the end it's the rim size is always on the end it's yourMoreHere is your sidewall height and a 17 on the end it's the rim size is always on the end it's your last two digits. So whether it's for 13 14 15 16 or 17 it's always on the trailer.
How do you measure a 5 lug bolt pattern?
2:146:11HOW TO: Measure 5-Lug wheel bolt pattern - YouTubeYouTubeStart of suggested clipEnd of suggested clipThe way that we have to do it on a five lug wheel is we need to measure from the center of oneMoreThe way that we have to do it on a five lug wheel is we need to measure from the center of one circle. Of one lug hole skip a lug hole to the center of a second level.
What is offset on ATV?
To make it easier, you need to know what it is. Said plainly, the offset is the distance from the centerline of the wheel to the hub mounting surface.
What do the numbers on a wheel mean?
Each set of numbers denotes a different measurement of the wheel. To get the rim that you need, it's important to know what each set of numbers is and how to find the measurement yourself. In the order that they appear, the numbers represent rim size (diameter and width), wheel offset and bolt pattern.
How to measure diameter of wheel?
To measure for the diameter, stretch your tape across the widest part of the wheel from bead seat to bead seat. For the width, you will need to measure across the wheel (outside to inside or vice versa) from bead seat to bead seat.
What is the inside measurement of a wheel?
The "4" is the inside measurement in inches from the centerline of the wheel to the bead seat. This section is called the bell of the wheel. The "3" is the outside measurement from the centerline to the bead seat. This is the nose of the wheel and the side with the valve stem hole.
How to measure a 4 lug bolt?
To find the size of a 4-lug, simply measure the distance between the center of one bolt hole to the center of the hole directly across from it.
What size wheel is used for an ATV?
The first set of numbers that you will see in an ATV wheel size (12x7 from the example) is the diameter and width of the wheel. So with our example from above, the wheel will have a 12 inch diameter (height) and a 7 inch width across.
Is 4+4 wheel offset zero?
A 4+4 would be an example of a zero offset ATV wheel. It's important to pay close attention to the offset. A change in the wheel offset could affect your ATV's handling, smoothness of ride, spacing between the body and suspension and even the overall safety.
Why do ATV tires have dimensional numbers?
Many ATV tire selling manufacturers provide a dimensional number on the tire so that a customer can get a mental image of the tire size.
What can you handle with ATV tires?
With the help of ATV tires, you can comfortably handle impenetrable timber, sharp turns, muddy terrain with minimal trouble.
What does the last number on a tire mean?
Finally, the last number shows the diameter of the wheel that will mount a certain tire.
How tall is a tire when inflated?
Here, the first number 28 tells that when the tire is inflated, the overall height of the tire is 28-inches.
What is the height of a tire?
Here, the first number 28 tells that when the tire is inflated, the overall height of the tire is 28-inches . The second number 13 refers when the tire is properly mounted and has the correct air pressure in it, the overall width of the tire is 13-inches.
What does the letter R mean on a tire?
The letter “R” refers to the tire’s radial construction features. And the last digit tells the diameter of the tires.
Is an ATV the same as a UTV?
Although the outlook of ATV and UTV tires are the same, they have dissimilarity. They have numbers or letters in their tires and based on that they are designed.
What is a positive offset wheel?
A positive offset wheel has more rim in behind the hub of your ATV and less rim out in front of the hub. A positive offset will have a larger number first and and smaller number second. For example. 4+2, 5+2, 4+3, 5+3
How does an ATV wheel offset work?
Every rim has an offset that consists of 2 numbers that are measurements. The first number is the measurement (in inches) from the inside lip of the rim, to the center of the rim where the hub and rim meet. The 2nd number is the measurement (in inches) from the hub to the outside lip of the rim. For example: An ATV wheel with a 4+3 offset will measure 4" from the inside lip to the center of the rim where the hub and rim meet, and then it will measure 3" from the hub to the outside lip. The two numbers added together will total the overall width of the rim. Here are a few pictures and some additional information to help you understand ATV rim offsets.
What is a wide offset?
Wide stance offsets (aka negative offsets) can only be used on ATVs or UTVs with the Independent Rear Suspension, and they are not available in all fitments. They are generally used on UTVs to widen the stance & increase stability.
What is the 2nd number on a wheel?
The 2nd number is the measurement (in inches) from the hub to the outside lip of the rim. For example: An ATV wheel with a 4+3 offset will measure 4" from the inside lip to the center of the rim where the hub and rim meet, and then it will measure 3" from the hub to the outside lip.
Can you buy rims that are all the same width?
OPTION 1 - You can buy rims that are all 4 the same width. If you buy rims that are the same width front and back you will want to get the same positive offset rim for the front and back. For example, a 5+2, 4+3, or 6+1 (depending on your machine) and you would buy the exact same offset for the front and the rear.
Can you run the same size tires on the same rims?
This works great even though most factory rims are two different widths. You don't have to stick with that, you can buy the same rims front and rear and run the same size tires front and rear or you can get two different widths of tires and mount them on the same size rims.
Do you need a positive offset for front rims?
FRONT - You will need a positive offset for the front which could be one of several options, it just depends on what is offered in the rims you are buying. You will want the first number to be larger than the second number. For example, 4+2, 4+3, 5+2
How to measure rim bolt pattern?
To measure the rim bolt pattern on a wheel with 5 bolt holes, hold the tape measure on the edge of a bolt hole and measure across to the center of the 2nd hole. The diagram above should make it clear.
How to measure a bike bolt hole?
Measure from the center of one bolt hole (or stud if it is still one the bike) across the axle hole to the center of the bolt hole on the other side. You need this number in millimeters (mm). If your tape measure does not have millimeters on it, get the number in inches and multiply it by 25.4.
What is the bolt pattern on an ATV?
ATV or quad rim bolt patterns are written as number of bolts/distance apart in mm. So catalogs will show 3/110 or 4/110.
When measuring your ATV's bolt pattern, do you want to check the front and rear?
When measuring your ATV's bolt pattern you will want to check both the front and rear. Some ATV models use a different bolt pattern on front and back so you'll want to double check yours before purchasing new wheels.
Do you need to check the bolt pattern on an ATV?
When measuring your ATV's bolt pattern you will want to check both the front and rear. Some ATV models use a different bolt pattern on front and back so you'll want to double check yours before purchasing new wheels. Once you've found which bolt pattern your ATV needs, start shopping here: ATV Wheels.
Can you add videos to your watch history?
Videos you watch may be added to the TV's watch history and influence TV recommendations. To avoid this, cancel and sign in to YouTube on your computer. An error occurred while retrieving sharing information. Please try again later. When measuring your ATV's bolt pattern you will want to check both the front and rear.