Gyprock plasterboard
Drywall
Drywall is a panel made of calcium sulfate dihydrate, with or without additives, typically extruded between thick sheets of facer and backer paper, used in the construction of interior walls and ceilings. The plaster is mixed with fiber, plasticizer, foaming agent, and various additives …
What is the standard size of gyprock?
Gyprock installation process Standard gyprock sheets come in 1200mm or 1350mm widths and in lengths of up to 6mtrs. Most walls are built using 10mm thick gyprock, but it’s available in various thicknesses.
What are the dimensions of a sheet of drywall?
Drywall sheet sizes. Distance between wall studs and ceiling joists 12”, 16” or 24 inches in the U.S. depending on particular structure, load limitations and local codes. Width and often length of drywall sheets made according to these measurements. 4 x 8 feet plasterboard will cover 5, 4 and 3 wall studs with 12, 16,...
What are the dimensions of a gypsum board?
Gypsum boards dimensions. What are the standard dimensions of a drywall sheet? Dimensions of gypsum boards are determined by construction standards. Distance between wall studs and ceiling joists 12”, 16” or 24 inches in the U.S. depending on particular structure, load limitations and local codes.
How many studs does a 4x8 sheet of plasterboard cover?
Width and often length of drywall sheets made according to these measurements. 4 x 8 feet plasterboard will cover 5, 4 and 3 wall studs with 12, 16, or 24 inches distance between studs respectively if hang the sheet vertically and 9, 7 and 5 studs if hand horizontally.
What size is gyprock?
What is the AS/NZS standard for plasterboard?
When did gypsum and plaster merge?
When was plasterboard invented?
Where is Bayside Plasterboard located?
What size does gyprock sheets come in?
Manufacturing TolerancesNominal Thickness13mm ± 0.5mmNominal Widths900, 1200, and 1350mm ± 3mmNominal LengthsFrom 2400 to 6000mm ± 5mm, typically in 300mm incrementsSquarenessCut ends ± 3mm in the width of the board
How many m2 is a sheet of plasterboard?
Gyproc Standard Square edge Plasterboard, (L)2.4m (W)1.2m (T)12.5mm.
How long and wide is a sheet of drywall?
The most common size of drywall is 4 feet wide and 8 feet long. Since 1/2-inch thick sheets of 4- by 8-foot drywall tip the scales at 57 pounds, this size tends to be the biggest sheet that most do-it-yourselfers can carry and lift into place.
How big is a 8x4 plasterboard?
12.5 Standard Plasterboard 2400mm x 1200mm (8' x 4')
How many m2 are in a 8x4 sheet?
2.4m X 1.2m8'x4' for plasterboard is exactly 2.4m X 1.2m.
How big is a standard sheet of plasterboard?
The standard plasterboard sheet size is 120 cm in width and from 180 to 360 cm in height. The sizes are designed to support the standard stud spacing, which is 60 cm. Plasterboard can be found in different widths depending on the manufacturer.
How many sheets of drywall do I need for a 12x12 room?
A 12′ by 12′ room with 8′ walls would have a total of 576 sq ft. After dividing the square footage by 32, we know that a 12×12 room would need 18 sheets of drywall.
How many sheets of drywall can one person hang a day?
drywall thickness weights about 60 pounds. The new lightweight drywall weighs about 41 pounds. A drywall hanger can hang an average of 60 4×8 sheets a day.
How much does a drywall sheet cost?
Standard Drywall The price range for a 1/2-inch sheet is $12 to $18. 5/8-inch panel pricing is between $14 to $20, while the price for a 3/4-inch panel ranges from $20 to $30. It's best for use on walls and ceilings in living areas that generally remain dry.
Can you use 12.5 mm plasterboard on ceilings?
Size of a Plasterboard Wall Thicknesses of plasterboard can range between 9mm and 102mm, depending on the type of board you require. Standard plasterboard thicknesses for ceilings are usually 9.5 mm to 12.5 mm, while walls can be 12.5 mm to 15 mm.
Can you use 10mm plasterboard on ceilings?
You can use 10mm plaster board if the board spans no more than 450mm between battens. You can stretch this out to 600mm by either using a 10mm ceiling board specially made for the application or 13mm board.
How big is a 6x3 plasterboard?
Features & Benefits; Available in a wide range of sizes to minimize waste.
How do you work out m2 of a sheet?
In order to calculate the size of a room or space in m2, you simply multiply the length of the space (in metres) by the width of the space (in metres).
How many m2 does a 25kg bag of plaster cover?
Plastering Accessories Supplied in 25kg. bags. Coverage at 11mm thickness is approximately 2.75 square metres per 25kg.
How many sheets are in a pallet of 12.5 mm plasterboard?
72 SheetsCOREX White Plasterboard - 2.4 x 1.2m x 12.5mm (Pallet of 72 Sheets)
How do I calculate how much plasterboard I need?
To determine the number of plasterboards required to cover your wall or ceiling you need to take the height and width of the boards and then multiply them together - before dividing this number by the square metres you want to fill.
Gyprock CSR 1200 x 900 x 10mm Plasterboard Repair Panel RE
Find Gyprock CSR 1200 x 900 x 10mm Plasterboard Repair Panel RE at Bunnings. Visit your local store for the widest range of products.
Standard Plasterboard Sizes - gyprock
Standard Plasterboard Sizes Standard is available in the following sizes per state: NSW VIC/TAS QLD RE 13MM 0900X2700 RE 13MM 1200X2400 RE 13MM 1200X2700
Plasterboard Sheet Sizes
Stocked Non-Stocked Gyprock™ Plasterboard Not Available in VIC Sheet Size 10mm 13mm 2400 x 1200 mm 2400 x 1350 mm 2740 x 900 mm 2700 x 1200 mm 3000 x 1200 mm
What are the dimensions of drywall?
Distance between wall studs and ceiling joists 12”, 16” or 24 inches in the U.S. depending on particular structure, load limitations and local codes.
How much does a 4x8 drywall sheet weigh?
One sheet 4’ x 8’ x 1/2” of drywall weigh about 52 – 58 pounds (24 – 26 kilograms) with proportional decrease or increase in weight depending on its width, length and thickness.
How thick is gypsum board?
Gypsum boards available in five different thicknesses 1/4”, 3/8”, 1/2", 5/8”, 3/4", two width 48 and 54 inches, but 48” much more common option, and vary in length from 8 to 16 feet. A – area covered by one sheet of drywall.
How to calculate gypsum board size?
How to calculate the amount of gypsum boards require for a room. Depending on dimensions, calculate how many square feet is one sheet of drywall. Measure room walls and ceiling and convert it to ft². Divide the total room square footage excluding openings for windows and doors by the area of one gypsum board. ...
Do you deduct sliding doors?
In standard room you do not deduct space for regular doors and windows openings. But in some cases wide sliding or patio doors with up to ceiling windows will take about 20% - 25% of a total wall area what should be taken into consideration while estimating the number of drywall sheets require. Metric sizes.
What is a 4 1/2 foot drywall panel?
When wall panels come in lengths and widths other than these multiples of 4 feet, they are usually not drywall panels but are instead cement board or a drywall alternative, such as DRIcor Smartwall. While not common on the consumer market, 4-1/2-foot-wide drywall sheets can be special-ordered.
How did drywall change the building industry?
Drywall changed the building industry when it came on the scene about a century ago. While it took a few decades for drywall to fully take root in home construction, this pre-sized wallboard eventually meant no more nailing of hundreds of lath boards and troweling of wet plaster.
What size sheet is 2' by 2'?
The 2-foot by 2-foot square of drywall is not a stock sheet size. However, cut-down pieces of drywall are often available at most home centers and especially at smaller local hardware stores. These small sheets can be useful for patching jobs or wall-boarding small nooks and alcoves.
Why do you need to double drywall thickness?
In ordinary residential construction, doubling up drywall thickness can reduce sound transmission and make for sturdier walls. Thicker drywall may be required by code for any wall or ceiling covered with a texture or skim coat where studs or joists are spaced 24 inches on-center rather than 16 inches.
How long is a drywall sheet?
The length and width of drywall sheets are usually in multiples of 4 feet—most commonly, 4-foot by 8-foot, 4-foot by 12-foot, or 4-foot by 16-foot sheets. Building codes have no specific requirements for the width and length of drywall sheets. These are determined by the needs of the architect, builder, and client.
What is fire resistant drywall?
This thicker drywall is often called fire-resistant drywall. Common walls between residential living spaces and attached garages, for example, require a fire-resistant construction, as do furnace rooms. This fire resistance can also be achieved by installing multiple layers of thinner drywall panels. Read More.
What is layered drywall?
Layered Drywall. Some applications call for or allow multiple layers of drywall. In townhouses, for example, the shared walls between units may require double layers of 1/2-inch wallboard to create a very fire-resistant and sound-resistant wall.
What size is gyprock?
Gyprock plasterboard sheets are commonly available in 1200mm and 1350mm widths, and have recessed longitudinal edges facilitating a smooth, seamless joint finish. USG Boral plasterboard products meet the requirements of AS 2588 Gypsum plasterboard, but also manufacture an enormous range of gyprock sheet sizes to meet the unique needs and demands of the Australian construction sector. However, this can be daunting to navigate if you aren’t quite sure on what the best type of plasterboard product is right for you, so it’s always worth consulting with the professionals before you go shopping.
What is the AS/NZS standard for plasterboard?
Whether you’re an industry professional or undertaking a DIY venture at home, understanding the types, sizes, minimum standards and levels of finish required for plasterboard application is critical if you hope to meet the required AS/NZS Standard 2589 Gypsum Linings Application and Finishing standards. For those unfamiliar with this building equipment, the choices available for plasterboard materials are actually a great deal larger than most people initially realise.
When did gypsum and plaster merge?
All the way back in 1901 , thirty gypsum and plaster companies merged to form the United States Gypsum Company – or USG – resulting in the creation of the first nationwide gypsum company in the USA. The new company combined the operations of 37 mining and calcining plants producing agricultural and construction plaster, and quickly cemented their status as market leaders for gypsum panels, shaft wall systems and lightweight metal framing in the United States.
When was plasterboard invented?
However, the real game changer arrived when a process was invented in 1894, which involved adding a layer of gypsum plaster between layers of felt paper, which went on to be known as plasterboard. These sheets of board provided a smooth finish for painting or further plastering as well as insulation, and were faster and easier to put up. The magical formula was that the plaster was already dry between the layers of paper, hence the term ‘drywall’.
Where is Bayside Plasterboard located?
With two showrooms conveniently located at both Capalaba in Brisbane and Carrara on the Gold Coast, access to a wide range of plastering tools and accessories, hand tools, and power tools has never been easier for South East Queensland’s growing building industry.
