To create a content page declaratively
- Create a new ASP.NET Web page.
- Switch to Source view.
- Remove everything from the page except the @ Page directive.
- Add a MasterPageFile attribute to the @ Page directive that references the master page, as shown in the following code example. VB Copy ...
- Add Content controls to the page that correspond to ContentPlaceHolder controls on the master page. Note ...
How to create a master page in ASP NET?
Master Page In Asp.net Step 1: Open new project in visual studio New project->Installed->Web->ASP.NET Web Application (shown in the... Step 2: Add new file in to our project. Add the master page into our project. Right click Project->Add->New item (shown... Step 3: Design the master page, using ...
How to add the masterpagefile attribute in the content page?
The MasterPageFile attribute in the content page must show a different master page name in that case. 1. Add a MasterPageFile attribute in its @Page directive. This attribute will mention which master page it is referencing. 2. Must add the appropriate Content controls manually. 3.
How to add a content page in an application?
The steps to add a content page to the application is as shown below: Select the ‘Add New Item’ from the list. 2) Add the web form page to the application. 3) Select a master page for the content page from all the available master pages in an application. 4) The content page in an application is as shown below:
How to add a master page to an existing project?
New project->Installed->Web->ASP.NET Web Application (shown in the picture), After clicking OK button in the Window, select Empty (shown in the picture), After clicking OK button, project "masterpage" opens but no file is there (shown in the picture), Step 2: Add new file in to our project. Add the master page into our project.
How do you bind a content page to a master page?
The @Page directive page binds the content page to a specific master page. It defines a title for the page to be merged with the master page. User can create content by adding content controls and mapping them to the contentplaceholder controls on the master page.
How do I add a master page?
To create the master page In Solution Explorer, right-click the name of your Web site, and then click Add New Item. Under Visual Studio installed templates, click Master Page. In the Name box, type Master1. Select the Place code in separate file check box.
Which page loads first master or content?
3 Answers. Show activity on this post. The content page load event will fire before the master page load event.
What is the use of master page?
Master pages are used to create consistency from page to page in a document. Master pages typicially contain page headers, footers, margin and column guides, and other elements that occur on multiple pages in your document.
How many master pages can you have?
You can create as many masters as you want or need – for example, you want a colored box down the left margin of just some pages; you could create a master that has this look, and then apply it to only the pages that need it. 1.
How can use user control in master page in asp net?
To use a User Control in an . aspx page you need to register the control in the . aspx page....aspx code will look as in the following:<%@ Page Language="C#" AutoEventWireup="true" CodeFile="Default. ... <%@ Register Src="~/StudentUserControl. ...
More items...•What is the page life cycle in asp net?
When an ASP.NET page runs, the page goes through a life cycle in which it performs a series of processing steps. These include initialization, instantiating controls, restoring and maintaining state, running event handler code, and rendering.
In which event the master page controls are loaded?
Master page is loaded in the Load event of the Master page.
How do I add a master page to an existing web form?
Add the master page into our project. Right click Project->Add->New item (shown in the picture), After clicking on new item, Window will open, select Web Form->Web Forms Master Page (shown in the picture), After clicking the add button, master page 'site1.
How do you create a master page in Word?
Click Master Pages > New Master Page. In the Outline view, right-click Master Pages, and then click Insert > New Master Page....Optional: To create page breaks:Select the element that contains the master page.In the Properties view, click the General tab.For the Force page change property, select true.
Where is the master page in Word?
To view the current master pages in your open publication, click View > Master Page. Begin to edit the master page in the master page window by adding elements such as headers and footers or page numbers. Click Close Master Page to go back to publication view.
How do I create a master page in HTML?
Insert the HTML code of the shared parts of the website into the master page:In the Pages application, select the root page of the website's content tree.In Edit mode, switch to the Master page tab.Click Edit layout.Delete the default layout content.Open the Index. ... Click Save & Close.More items...•
How to add a master page in Visual Studio?from docs.microsoft.com
In the Language list, click the programming language you prefer. Select the Select master page check box, and then click Add. The Select a Master Page dialog box appears. Click Master1.master, and then click OK.
What is the master page of ASP?from docs.microsoft.com
Note that the master page defines the common site-wide layout - the markup at the top, bottom, and right of every page - as well as a ContentPlaceHolder in the middle-left, where the unique content for each individual web page is located.
How to add static content to a master page?from docs.microsoft.com
To add static content to the master page. Click the bottom cell, and then type footer text such as Copyright 2007 Contoso Inc. In the Toolbox, from the Navigation control group, drag a Menu control into the top cell. Create a menu by following these steps: Set the Menu control's Orientation property to Horizontal.
What is a consistent site-wide page layout?from docs.microsoft.com
Building a website with a consistent site-wide page layout requires that each web page emit common formatting markup in addition to its custom content. For example, while each tutorial or forum post on www.asp.net have their own unique content, each of these pages also render a series of common <div> elements that display the top-level section links: Home, Get Started, Learn, and so on.
How to add new item to a website?from docs.microsoft.com
In Solution Explorer, right-click the name of your Web site, and then click AddNew Item.
How to copy a master page?from docs.microsoft.com
In Solution Explorer, right-click Master1.master, and then click Copy. Right-click the name of the Web site, and then click Paste. A master page is added to the Web site with the name Copy of master1.master. Right-click Copy of master1.master, click Rename, and then name the new master page Master2.master.
How to add a logo to a web site?from docs.microsoft.com
If you have a graphics file available to use as a logo, follow these steps to place it on the master page: In Solution Explorer, right-click the name of your Web site, and then click Add Existing Item. Navigate to your graphics file, select the graphic file, and then click Add.
How to create a master page in ASP.NET?
To create a master page, create an ASP.NET website by clicking ‘File’ > ‘New’ > ‘Website’. Right click on the Project in the solution explorer and click ‘Add New Item’. In the dialog box, choose the ‘Master Page’ and click ‘Add’. The ‘MasterPage.master’ appears in the solution explorer.
How to create a nested master page in an application?
The steps to create the nested master page in an application are as follows: 1) Create a master page in the project by selecting it from the templates. 2) Select Site.master template as the master page for the application.
What is the @master directive?
The @Master directive is defines in the master page. The master page contains one or more <asp:ContentPlaceHolder> for an individual content. The id attribute identifies the placeholder from all present in a web page. The master page has .master extension. The syntax of the master directive is as shown below:
What is a master page?
Master pages provide a template for all other pages in an application. The master pages define placeholders for the content, which are overridden for the content. The result is combination of master and content page. Every master page has one or more content pages in an application. The advantages of the master page are as mentioned below:
Where is the label control in a master page?
Consider another example of a label control. The label control is placed inside the ContentPlaceHolder of the master page. The code to access values of the label control is as shown below:
When to use master pages?
Master Pages are used when user needs a consistent look and behavior over all web pages in an application. When a user needs to attach header and footer for all the web pages in an application, the master pages are used. Master pages provide a template for all other pages in an application. The master pages define placeholders for ...
Can you write code in the content pages?
User can write code in the content pages referring properties, methods and controls in master pages. This includes public properties and methods. User can add reference when they are declared as public members of the master page. The syntax to add @MasterType directive is as shown below:
Introduction
One attribute of a well-designed website is a consistent site-wide page layout. Take the www.asp.net website, for example. At the time of this writing, every page has the same content at the top and bottom of the page. As Figure 1 shows, the very top of each page displays a gray bar with a list of Microsoft Communities.
Understanding How Master Pages Work
Building a website with a consistent site-wide page layout requires that each web page emit common formatting markup in addition to its custom content.
Step 1: Creating a Master Page
Before we can explore creating and using master and content pages, we first need an ASP.NET website. Start by creating a new file system-based ASP.NET website. To accomplish this, launch Visual Web Developer and then go to the File menu and choose New Web Site, displaying the New Web Site dialog box (see Figure 4).
Step 2: Creating Associated Content Pages
With the master page created, we are ready to start creating ASP.NET pages that are bound to the master page. Such pages are referred to as content pages.
Step 3: Updating the Master Page's Markup
One of the primary benefits of master pages is that a single master page may be used to define the overall layout for numerous pages on the site. Therefore, updating the site's look and feel requires updating a single file - the master page.
Summary
Master pages enable ASP.NET developers to design a consistent site-wide layout that is easily updateable. Creating master pages and their associated content pages is as simple as creating standard ASP.NET pages, as Visual Web Developer offers rich design-time support.
Where is the login control on a master page?
So, in your example, you can have the login controls on the upper right of the master page , and then have the authentication logic in the code page for the MASTER PAGE, not your content page.
How does the master page work?
The master page can respond to events from its own controls, and the pages themselves respond to events from their own controls, and you're set. If you need the page to interact with the master page, you can access it via the Page.Master property.
How does ASP.NET emulate WinForms?
ASP.NET pages try to emulate the WinForms environment, by provided state persistance through the PostBack model. This provides an element of state to a stateless environment. In order to do this, the runtime needs to be able to have the ability to maintain this state within each "form". It does this by posting back data to itself. It's important to note that:
What is the page load code behind?
In the Page_Load code-behind for the master, I then added code to check the request to see what data was passed in the request. If it contains data (say a hidden field) then I know the post was sourced from the Form on the master page, if not, then it is most liekly a PostBack from content, and can be ignored.
How many forms does ASP.NET have?
ASP.NET is designed to have one form per page and only one form. When it was originally designed that was not a problem.
Can you have only one form element in ASP.NET?
Everyone else has already mentioned that you can only have a single form element in a given ASP.NET page, and that it would be contained in the master page. So far, so good. But I don't think that helps you get fully where you want to be ...
Can you use jQuery to add content to an empty div?
Salve! In a similar thread, I posted an answer that might help you. You can use jquery to add content to an empty div. That content can include form tags, and even a submit function independant of anything the server-side code is doing. The only downside to this is if the user does not have javascript enabled!
How to apply master page template to certain pages?
If we want to apply master page template to certain pages only, then we can use the <location> element within the web.config file. Suppose i want to add a master page to a content page which is present in the mp folder. The the path is to be mentioned in the <location> element in the web.config file.
What is the master page extension?
Extension of Master page is .master. The master page is identified by a special @Master directive that replaces the @Page that is used for ordinary .aspx . The @Master directive can contain most of the same directives that an @Page directive can. In addition to the @Master directive, the master page also contains all the top-level HTML elements for a page, such as <html>, <head> and <form>. On the master page we can include one or more ContentPlaceHolder controls that define regions where replaceable content will appear. We can also use HTML and ASP.NET elements as part of our master page.
How to define content for placeholders?
Content for the placeholders can be defined by creating individual content pages (.aspx). Such Content Pages are bound to the specific master page.The binding of the content page with the master page is possible, using @Page directive and MasterPageFile attribute. Extension of Content page is .aspx
When is the title of the master page visible?
Usually the title of the master page is visible when we run any of our Content page. In the following figure, "Happy New Year 2011" is the title, which i had set in the master page. And is visible when the Home.aspx (content page) is executed.
Is ContactUs.aspx a child page?
Following are two snap shots of Home.aspx and ContactUs.aspx. Both of these are child pages/ content pages. The common portion of both the pages are mentioned in the master page and the distinct items of the pages are present in the respective content page itself.
Can you override a master page?
We can also override the application-wide master page specification by declaring a different master page. The MasterPageFile attribute in the content page must show a different master page name in that case.
