- Ensure the Machine Is Balanced. Your machine may need to be rebalanced. ...
- Tighten Any Connection Straps. With stacking washer-dryer combinations, the connection straps may have loosened, causing the unit to shake violently.
- Ensure the Load is Balanced. The classic and most easily fixable cause of a shaking clothes washer is an imbalanced load. ...
- Consider an Anti-Vibration Pad. Consider purchasing an anti-vibration pad. Independent testing has shown that pads that are 3 inches thick do an excellent job of deadening the shaking and vibration. ...
Should you repair or replace your washing machine?
How to Decide Whether to Repair a Washing Machine or Replace it
- Defects and Recalls. Appliance-makers usually cover washers with a one-year limited warranty that includes repairs necessitated by defects.
- Natural Disasters and Insurance. ...
- Household Budget and Convenience. ...
- Energy Bills. ...
Why is my washing machine not working?
Troubleshooting and Diagnosis
- Unbalanced or Jammed Load. Clothes can jam in the washer between the drum and the basket, creating a walker. ...
- Level the Washer. If your washer isn’t completely level, it won’t be able to spin properly. ...
- Washer is Overloaded. ...
- Reset the Washer. ...
- Clogged or Kinked Drain Hose. ...
Why is my washing machine not cleaning clothes?
Was the correct wash temperature selected and the hoses connected correctly?
- If warmer water temperatures are safe for the fabrics being washed, use hot or warm washes. Check the garment fabric care labels for temperature recommendations. ...
- Check your water inlet hoses for proper connection to the household water supply. ...
- Both the hot and the cold water faucets should be connected and turned on. Turn on the water. ...
Why is my washing machine not spinning?
You can find out if the pump is the problem by:
- Unplug the washing machine. ...
- Identify the pump and see if it turns freely when you loosen the tension from the pump belt that is wrapped around it.
- If the pump belt is worn or broken, that is likely the extent of the problem. ...
- If the pump does not turn freely or will not turn at all, you will need to have the pump removed and replaced.
What are common problems with washing machines?
10 Most Common Washing Machine ProblemsIt Bounces Around. ... It's Noisy. ... Clothes Are Getting Ripped. ... Improper Or Slow Draining. ... My Washing Machine Won't Spin. ... There's No Water. ... The Door Won't Open. ... It's Smelly.More items...
What causes washing machine not to wash?
There are a few possible reasons for this: - The locking mechanism could have jammed (maybe some clothes have gotten in the way). - There could be a glitch in the washer's computer. - The washing machine may not be draining properly, leaving the washer door locked and the drum filled with water.
Can you fix a washing machine yourself?
Instead of calling in an expensive appliance technician, you can repair your washing machine by yourself. Most of these repairs require simple tools and can be performed by homeowners who have only limited appliance repair skills.
What to do when washing machine is not working?
Make sure the machine is tightly plugged in. Next, check for a tripped circuit breaker. Reset the breaker and try to start the washer. If neither is at fault, you may have a damaged power cord.
How do you diagnose a washing machine problem?
Washer Troubleshooting GuideCheck that the washer is plugged in securely.Check the circuit breaker or fuse box.Test the outlet for current.Check that the water supply valves are turned on.Inspect the filter screens.Test for overheating.Test the water level switch.Test the timer control.More items...
Why is my washing machine not spinning and draining?
If your washer won't drain or spin, the water level control may be faulty. Open the machine's control panel and look for a plastic tube attached to the water level valve. If it's clogged, clear it out with vinegar. If the valve itself is corroded, it may need to be replaced.
How do I know if my washing machine pump is working?
Put your finger into the drain outlet and feel the impellers if the pump freely turns. One or more of them may be broken. If so, you'll be able to feel them while you're turning the pump flywheel with your other hand. You also may see broken pieces of plastic in the bottom of the pump housing.
How do I know if the pump has gone on my washing machine?
When the drain pump is either blocked or faulty these are the top symptoms that will be reported: Water in washing machine won't drain. Washing machine stopped full of water. Washing machine won't spin.
Where is the reset button on a washing machine?
1:023:47Washer Not Spinning - How to Reset Motor (Easy) - YouTubeYouTubeStart of suggested clipEnd of suggested clipThe machine gives you 30 seconds to lift the lid and close. It six times and once you start liftingMoreThe machine gives you 30 seconds to lift the lid and close. It six times and once you start lifting the lid. You have 12 seconds to do the six repetitions.
Does a washing machine have a reset button?
Most newer washing machines come with a reset feature that allows you to restart the washer after it experiences an error code or fault. Causes that lead to these problems include power spikes, imbalanced loads or an interruption in power. Some machines have a button you push to reset its motor.
Why are my clothes still dirty after washing them?
The reason for this is most likely because you overloaded the washer. Overloading your machine won't allow it to wash your load completely, which will cause you to have to wash the clothes again – or walk around with dirty clothes on.
Why are my clothes coming out of the washer dirty?
If you're using too much detergent to wash your clothes, and this is resulting in your garments coming out of the wash soiled, just use less detergent. It's really as simple as that! If you're not sure how much detergent to use for the job, read the packaging on the bottle/box.
How do you reset a washing machine?
To reset your washing machine, unplug it from the power outlet. Then, plug the washer cord back into the wall. Finally, open and close the washing machine door six times to send the reset signal to the system components.
How do I clean my washing machine filter?
The quickest way to clean out your filter is to remove it from the unit and soak it in hot water, loosening any clog or trapped residue. If the filter cannot be removed, clean it out with brush. Some filters are disposable, so instead of cleaning them you can just throw them away and put a new one in place.
THE WASHING MACHINE WON’T DRAIN
If your washing machine won’t drain or your loads are coming out too wet, you may have a kink or clog in the drain hose, a drain pipe that’s too lo...
MY WASHING MACHINE WON’T SPIN
A washer needs to spin correctly in order to fully rinse clothes and drain water from the tub. Before scheduling a service call, check if the power...
WASHING MACHINE IS LEAKING
Water is meant to stay in the washer. But if you’re noticing some water appearing on the floor, it may be a simple fix. Try cleaning the door seal,...
MY WASHER IS NOISIER THAN EXPECTED
If you’ve just brought home a new washer, it’s possible that it makes some noises you aren’t familiar with. Many of these are normal and shouldn’t...
MY WASHER HAS ODORS
Washer odors are easily fixable and usually the result of a missed cleaning, a load left too long or too much detergent and fabric softener use. Tr...
How to fix water on floor in washer?
But if you’re noticing some water appearing on the floor, it may be a simple fix. Try cleaning the door seal, tightening hose connections and cleaning the drain pump filter.
What to do if your washer spins but doesn't spin?
In this case, turn on a spin cycle or drain and spin cycle to get rid of the remaining water.
How high should a drain pipe be on a Maytag washer?
For most Maytag ® washers, the drainpipe should be installed at a maximum of 96" and a minimum of 39" from the bottom of the machine . Your washer will not be able to adequately pump water out of the washer if the drainpipe reaches too high. In this case, water may flow back into the washer. Consult your washer's installation instructions for model-specific installation requirements or watch this video on proper drain hose and drainpipe installation for Maytag ® washers.
Why do washers spin?
A washer needs to spin correctly in order to fully rinse clothes and drain water from the tub. Before scheduling a service call, check if the power has gone out, that your load is balanced and that the washer is level.
How to contact Maytag for repair?
If you need professional repair help, schedule service online or call 1-800-344-1274.
Why does my washer make a hum?
It’s normal to hear the pump or motor make a continuous humming sound while loads are washing, along with periodic gurgling or surging as water is removed during the spin or drain cycles . You may also hear the hum of the sensing spins after you have started the washer.
Why does my washer make a clicking noise?
Many washer lids make clicking noises while they’re locking in place at the beginning of a cycle. It’s also normal to hear metal items on clothing like buckles or zippers touch against the stainless steel basket. Always empty your pockets before putting clothes in the washer—it’s possible for coins or other items to fall between the basket and the tub, which may require a service call.
How to fix a Maytag washer that won't spin?
when your washer won’t spin, remove the lid switch on a Maytag-type washer by prying up the locking tab and sliding the switch forward as you try to figure out how to fix a washer that won’t spin. To install the new switch, just set it in the slot and pull it backward.
How long does it take to repair a Maytag washer?
Repairs can take as little as an hour, but set aside a full morning to diagnose the trouble, get parts and complete the repair. To find parts, check the yellow pages under “Appliance Parts” or search online for “appliance parts” for Maytag washer troubleshooting or a washer repairman.
How to test a broken lid switch?
To test the switch, you’ll need a continuity tester (about $8) or a multimeter (about $15) . If you don’t know how to use a multimeter, type “multimeter” in the search box above. Remove the wires connected to the switch and touch the tester’s probes to the switch’s connectors. As you open and close the lid, readings should alternate between continuity and no continuity. If not, replace the switch ($33).
How to remove snap retainers from motor?
Pop the snap retainers with a screwdriver and pull the pump off the motor shaft. Then disconnect the electrical connectors from the motor.
What causes a Whirlpool washer to break?
If you own a Whirlpool direct-drive washer (the water hoses attach to the left side when viewed from the back), you’ve probably got a broken coupler—a common failure caused by overloading the machine. It’s an easy and inexpensive fix, about $22.
Why does my washer break down?
Tip: Make sure your washer has power! Unplugged cords and tripped breakers are common causes of appliance “breakdowns.”
How to change a water valve on a hot water tank?
Remove the water valve bracket and mount the new valve. Transfer the electrical connectors to the Hot/Cold portions of the new valve. Then transfer the fill hose by compressing the spring clamp.
What is the problem with washing machines?
One common problem associated with washing machines is that the machine's basin or tub fills with water but the central agitator does not move. Agitation is the back and forth motion that cleans the clothing. This action is performed by the central plastic cone-shaped device called the agitator.
Why does my washer move?
Check the power cord behind the washer to make sure that it is plugged in. Due to washers' vigorous movements, especially when the load is imbalanced, machines may move. When a machine moves, it may inadvertently unplug the power cord.
Why does my washing machine shake when it is running?
This may be pronounced if you have a high-efficiency machine, which has a faster spin cycle than top-loading machines. Walking machines are very dangerous because they can become detached from the water lines or the drainage line, or they might strain at the power cord and cause an electrical fire.
What does it mean when a washer is spinning at a high rate of speed?
Spinning at a high rate of speed is the action that squeezes water out of the clothing so that it can be dried in the dryer. Try to redistribute the clothing within the washing machine tub. When the washer is out of balance, it will automatically stop until you can get the clothing back in balance.
Why does my washing machine make a squeaky sound?
If the washing machine is making a squeaking sound, the tub bearings may need lubrication. The washing machine motor drive belt or pulley may be worn out. This is a rather involved repair, where you need to take apart a significant section of the machine to get to the motor.
What part of the door should seat into the bottom of the machine?
Close the lid and watch as the part on the door connects with the part on the machine. The top part should seat into the bottom part.
Can you tilt a washing machine?
Always unplug your washing machine before working on it, no matter how minor the repairs may seem to be. Washing machines are heavy and can tip over. So, do not tilt the machine or move without help.
How to fix a washing machine that vibrates?
Is your washing machine vibrating off its stand, into the wall, or causing other problems? There’s not always a perfect fix for this, but there are several things you can try. Make sure the surface the washing machine is placed on is entirely level, clean, and free of any dirt or residues. Check your washing machine legs as well, and make sure they are positioned correctly. Many washer feet can be adjusted with a lock, although you’ll probably need some help to turn the washing machine over to adjust the feet.
Why won't my washing machine stop?
If the washing machine is randomly shutting down or won’t stop at all, then you may have a power problem. Make sure the power cable is properly attached and plugged in. For newer washers, pay attention to any error codes that may pop up on the panel or app, and look at your owner’s manual to see what they may indicate.
Why does my washer keep shutting off?
Random shutdowns can also be caused by a faulty lid or door switch. Washing machines will automatically stop if they detect the lid has been opened, so a breaking or nearly detached lid switch can cause issues here. You can often see or feel the lid switch on your washer to tell if it’s damaged or not.
Why is my washer leaking?
If the washer is generally leaking during the wash cycle, that’s a sign that the fill hose could be leaking, or the water inlet valve may be broken or damaged. If the washer is primarily leaking in the spin cycle, that’s a sign that the drain hose or drain pump could be damaged or loose.
How to tell if a washing machine is shutting down?
On the other hand, if your washing machine seems to be very deliberately stopping between cycles, or always at the same time after it’s started , that’s a sign it’s shutting down because it has been overloaded with too many clothes.
Why does my washing machine make a noise?
Some vibration is common for all washing machines, but if your washer is suddenly making clunking or screeching noises that it didn’t make before, it’s time for a closer look. This can often be caused by failing or rusted ball bearings that help move the drum or tub, or possibly by belts wearing out (this can depend on the construction of your washing machine). Some drums also have couplers that can break off with overuse and cause loud grinding noises.
What is the core of a washing machine?
While tech advances have given us all some impressive washing machine features, the core of the machine remains simple: Water is pumped in a big drum with cloths, the big drum spins around, and water is pumped back out. However, despite the simplicity, there are still things that can go wrong with even the best washers available.
Why is my washing machine leaking on the floor?
If your washing machine is leaking on the floor, you'll definitely want to find the problem fast. If it only leaks during the spin cycle, it's likely from the drain hose. Check for loose hose connections, the condition of the hose (cracks or damage), a clog or obstruction, and the connection to the washer.
Why won't my washer turn on?
Washer Won't Turn On. While this may seem like common sense, if your washer doesn't respond when you turn it on, make sure the power source is connected. A cord may have accidentally been unplugged or the circuit breaker may have been tripped on. If power is getting to the machine, your motor may have overheated.
What does it mean when your washer makes a clicking noise?
A clicking noise, on the other hand, could indicate something lodged in the washer drain. Sometimes coins or other objects left in a pocket will come loose and get stuck there. Thus, be sure to check the drain and remove anything that doesn't belong.
How to check if a washer is alternating or no continuity?
Use a multimeter to test alternating continuity and no continuity by touching the probes to the switch's connectors. If you don't see this reading, replace the switch altogether. A worn or broken belt can prevent the washer from spinning or agitating, so you’ll need to replace any damaged belts with new ones.
Why is my pump jammed?
If you're hearing a buzzing or humming noise , you'll want to check your pump. Once again, loose objects can make their way to the pump and cause it to jam. Serious damage to the pump may require a pump replacement.
Why does my sandpaper machine start right up?
If power is getting to the machine, your motor may have overheated. This is a safety feature and once it has cooled down, it will start right up again. If this happens frequently, you may need a professional assessment to find out the cause. Check the lid switch to be sure it is positioned properly and seating right.
Why is my front load washer leaking?
If you've got a front-load washer, the door seal may be leaking. It's a common area for dirt build-up, and water can seep out. You should clean the seal carefully to eliminate this problem.
How long does it take to fix a leaking washing machine?
Don't panic when the washing machine starts leaking water all over the floor! You can usually fix the problem yourself within and hour or two at a fraction of the cost of calling a service technician. And only rarely will you have to purchase a new machine.
Where is the model number on a washing machine?
Model numbers are usually stamped on a small metal plate located under the tub lid or on the side or back of the machine. Copy down all the plate information and take it along to the parts distributor.
What happens if a pump leaks?
Note: The pump usually leaks around the pulley seal. If you spot water leaking from this spot, the pump is shot and will have to be replaced.
How to pull air dome out of tub?
Twist the air dome a quarter turn and pull it free from the outer tub.
How to align agitator belt with pump pulley?
Slide the pump lever into the agitator slot and align the belt with the pump pulley.
Can a washing machine leak?
There are only so many places from which a washing machine can leak. In this how-to article we cover the most common types of leaks — from the hose, pump and tub — but there may be additional problem areas specific to your brand of machine. There are two types of washing machine repair: belt drive and direct drive.
How to fix a clogged washing machine?
Alternatively, you can also try flushing them out by sending a steady stream of running water through the disconnected hoses. Once all the necessary components have been cleaned, dried and securely reattached, you may plug your washing machine back in and turn on the device's water supply. However, take care to thoroughly mop up any spilled water in the vicinity of your washing machine before plugging the device back in, as this tends to be a wet job. Also, when reconnecting your supply hoses to your washer's valves, take care not to cross-thread them. Should your washing machine water temperature problems persist, you may want to enlist the aid of a licensed professional.
Can you fix a washing machine water temperature?
If you've recently started having problems with your washing machine water temperature, you may be wondering how to go about fixing it. If so, you'll be pleased to learn that fixing your washing machine water temperature can be a fairly simple undertaking, provided you have the right set of tools and a handy instructional guide at your disposal. So if you're looking to fix your washing machine water temperature in a timely and stress-free fashion, simply read on to learn everything you'll need to know.
Why Does My Washer Stink?
So, there are a couple of different reasons why your washing machine may smell funky. What that odor smells like and what type of washer you have (front loading vs top loading) can help you determine the source of your unwanted stink.
How To Fix A Washing Machine That Smells Bad
No matter what smells you’re dealing with, you’re probably going to need to clean your washer’s drum to completely get rid of any lingering smells. Luckily, it’s not too hard. You may very well have everything you need at home!
How to Clean Your Washing Machine With Chlorine Bleach
A surefire way to get rid of moldy smells in your washer is by doing a bleach clean. Before you jump in, make sure you take proper safety precautions. Wear gloves, ensure the space is adequately ventilated (open windows, turn on fans or vents), and never combine chlorine bleach with other cleaners, even vinegar.
How to Stop Bad Washing Machine Smells Before They Start
Don’t let clothes sit for long. Be quick about getting wet clothes out of the washer and into the dryer. Wet clothes don’t need to sit for too long in the washer or the dryer before mildew starts to grow, causing a musty, moldy smell both on your clothes and in the appliance.
Wrapping Up
There! See? It isn’t too hard to eradicate odor causing microorganisms in your washing machine. After following this guide, your laundry should be smelling much fresher, and maybe coming out a bit more clean, to boot.
