how can i make my furnace blower quieter

How Do I Make My Furnace Blower Quieter?

• Check Air Flow. When airflow is restricted or blocked by debris, dust, or dirt, the blower has to work harder. ...
• Building Sound Insulation. When your furnace is too loud, put some insulation around it to ensure you’re not waking up the neighbors.
• Correct Blower Speed. ...
• Blower Bearing Replacement. ...
• Check Furnace Enclosure Noise Level. ...

Full Answer

How to make a noisy electric fireplace quiet?

How To Make A Room Fan Quieter: 8 Tips

1. Keep The Fan On A Level Surface. A rattling or clicking noise may be caused by your fan’s base hitting an uneven floor. ...
2. Sit Your Fan On a Rug or Carpet. If your fan still seems imbalanced and rattles despite the floor being flat and level, this may mean the base of ...
3. Clean It Thoroughly and Regularly. ...
4. Tighten Loose Screws or Knobs. ...
5. Align Fan Blades. ...

More items...

How to quiet a noisy power supply fan?

The main reasons for noise coming from a PSF are:

• dust and dirt
• foreign object stuck in the fan
• system overheating
• bearing out of balance
• requires lubrication
• broken blade

How to quiet a noisy air pump?

Noisy Heat Pump: How to Troubleshoot and Make It Quiet

• Tighten mounting bolts
• Install vibration absorbing pads
• Clean the fan blades
• Secure loose parts
• Level the heat pump
• Replace noisy parts
• Unclog drains
• Remove leaves and debris. In this article, you’ll learn about acceptable heat pump noise levels, what typical sound is, and what should raise red flags.

How to quiet a noisy baseboard heater?

• What can I do to stop electric baseboard heaters making clicking and banging noises when they’re turned on?
• Why do baseboard heaters continue to be noisy when switched off?
• How to deal with the constant high-pitched buzz from electric baseboard heaters?

How to check if a furnace is rattling?

Rattling – most often caused by vibration. Check for loose parts that can be anywhere or anything. Blower motor mount, squirrel cage, plenum, filter too small, or the furnace itself vibrating. Installing an acoustic rubber pad under the furnace (specially if it is sitting on concrete) will damp the vibration you hear through the pipes.Although the blower fan and motor are the most obvious parts to check, take a look at the complete unit. Pipe brackets, burner parts, cold air returns, access panels into the burner chamber and blower chamber, or even the plenum itself could be loose. The more vibration you have had over the years; the better chance of more things becoming loose.

Why does my furnace make a popping sound?

Faulty duct installation can produce a banging or popping sound. When the furnace blows warm air the metal ducts expand from the heat. If they cannot move lengthwise you will have something called ‘oil canning’. The pipe will wrinkle, or buckle, in and out because it is suddenly too long for the space it is occupying. (Think vinyl siding that is nailed too tight. The same term is used for the wrinkles in it.) I have seen a suggestion that you hammer a dent in the pipe where you think this is happening. Seems counterproductive to me. Especially if it does not solve the problem.

What are the moving parts of a furnace?

The only true moving parts in your furnace are the blower fan and motor. But they run a lot and move thousands of cubic feet of air every year. Eventually things wear, or get loose, and will begin making noise that is carried into your living spaces.

What is the heart of a furnace?

As mentioned, the heart of your heating system is the furnace–consisting of the heat chamber, blower chamber, attached plenum, and miscellaneous piping leading to, and from, most of the rooms in the house. Just because you hear noise from your heat vent does not mean it is caused by the furnace.

Why does my electric motor squeal?

Squealing – caused by lack of lubricant . Older electric motors did not have sealed bearings. They need to have oil added annually–in the oil ports at each end of the shaft. If it does not have oil ports do not oil the shaft. That will only leach the grease out of the bearings. Older blower wheels will also likely require oil. (Really old ones might have grease cups that need to be filled with bearing grease.) You will probably need to remove the access cover to get at them. Use 3 in 1 Motor Oil. It is made for electric motors.

Why does my furnace rumble?

Rumbling – is almost invariably a sign of a burner problem or fuel ignition problem known as ‘Roll-Out’. Roll-Out is a small explosion or burst of flame on start-up that could be caused by a cracked heat exchanger. This can be a dangerous situation. So, unless you really know what you are doing–and most of us don’t–have a professional furnace installer inspect it, and deal with it if necessary. Everyone in the house will sleep better.

Why is there racket coming out of the furnace vents?

Because, as far as you know, it is the only moving part in there. Make sure you check it out first. But be prepared to discover that the blame lies somewhere else.

How to stop noise from furnace blower?

Oiling the motor and replacing parts combined with some routine maintenance for the air filters should help reduce the amount of noise your furnace blower makes. While fixing a motor and cleaning filters is within the realm of work a homeowner can do, often work with the air ducts should be left to a professional technician.

What to do if your air blower is noisy?

Do a visual inspection of your air ducts and determine if you can see any light coming through the sides of the ducts.

What If My Furnace Makes a Screeching or Rattling Noise?

If you hear a screeching or rattling noise when you turn on your furnace blower, you may have an issue with the motor that powers the blower. The blower is responsible for moving warm air throughout your house, and the motor helps propel the fans that pull the warm air. Over time, the motor can become dry and damaged through repeated use.

How to stop a furnace blower from whistling?

Some easy fixes to prevent furnace blower noise includes: Change Dirty Filters – If you hear a whistling sound coming from your furnace blower, you may have an issue with dirty filters. When filters become too packed with dirt and dust, they can block the airflow from getting to your blower motor.

Why does my furnace make a rattling noise?

If you hear a screeching or rattling noise when you turn on your furnace blower, you may have an issue with the motor that powers the blower. The blower is responsible for moving warm air throughout your house, and the motor helps propel the fans that pull the warm air.

Why does my furnace make a boom sound?

Most ductwork is metal, which can expand and contract, especially when the temperature changes. When the hot air is initially pushed through the metal air ducts, the ducts will expand, causing a loud booming or popping sound.

What happens when a furnace belt wears out?

When the belt wears out, the dry rubber makes a loud noise as it moves through the gears within the furnace blower motor. Fixing a dry belt can be accomplished with the furnace blower motor removed from the furnace. While the motor is apart, be sure to correctly oil, or even replace, the belt.

How to fix a noisy furnace blower?

1. Call in the furnace repair service. All said and done, it may actually be a larger issue that is causing the noisy ducts. If you’ve already done all you’re able or willing to do, and your furnace blower is still too noisy for your liking, you should call in a professional furnace repair service to fix the issue.

What is a furnace blower?

The furnace blower is the part of the furnace that blows hot air into your ductwork so that it can make its way throughout your home. The blower is made up of a blower motor and a blower fan, and issues with one or both of these components could be making your furnace much noisier than it has to be. If that’s the case, use these tricks on how ...

Why does my blower make a loud noise?

A loud humming sound could be the result of too much dust buildup on the blower fan. Think of it this way: that caked-on dust is essentially creating wind resistance, which makes the loud humming sound. Clean it off to bring it back to its former glory!

What does it mean when your blower makes a banging sound?

Sadly, banging sounds could be indicative of something much more serious: a busted motor . If your blower motor is going, there’s not much you can do but replace it.

Why does my furnace make a noise?

Because sounds can resonate throughout the ductwork, it can be difficult to decipher where a particular sound is coming from.

Can a furnace fan make a whooshing noise?

Upon installation, your furnace’s fan should have been set to the appropriate speed for your unit, house size, and duct size. However , this isn’t always the case, and a setting that is too high for your space can cause whooshing air sounds to come from your vents.

Can a blower fan be bent?

You may also run up against a damaged blower fan. It is rare, but it can happen that the fan blades become bent. If that’s the case, confirm the size of your blower fan, and buy a new one.

What Is a Furnace Blower?

As its name suggests, a furnace blower is a component in your furnace whose main purpose is to blow hot air through the ducts into your house.

Furnace Noises and What They Mean

If you notice sudden and unusual noises you’ve never experienced with your furnace, especially when it runs or stops, they cause concern. The main types of furnace noises that indicate a problem include:

Normal Furnace Noises

Besides the worrisome noise a furnace makes, there are other types of noises that are completely normal for any type of furnace.

How To Quiet a Noisy Furnace Blower DIY

There are different techniques you can implement to make your furnace blower quieter. Some of these techniques are quite easy such that an average homeowner can accomplish while others require professional intervention.

Inspecting and Fixing Noisy Furnace Blower

Since there are several reasons to make your blower produce an unusual noise, you must approach them differently.

Soundproofing Furnace Room

Although you might fix most of the noise coming from your furnace blower mechanically, sometimes it’s hard to eliminate its structural noise.

Final Thought on How to Quiet a Noisy Furnace Blower

Due to temperature changes, a thud noise may also indicate an expansion and contraction of metal ducts inside your furnace blower.

How to stop noise coming from furnace blower?

A broad tip to work on, but you can start on the area where the blower is located. Check the layout of your furnace room. Add insulators to reduce the noise. Insulation foam secured with a wire will dampen the noise coming from the motor.

How to reduce blower noise in furnace?

A: The best and easiest routine maintenance you can do to reduce the furnace blower noise is adding oil or lubricant to corrosive parts and cleaning and replacing the furnace filter if needed.

Why does my furnace thud?

Any discrepancy from these two elements will cause a thud since the metal ducts interact with the unsteady or unbalanced airflow blown out by the furnace blower.

Why is a furnace blower important?

The furnace blower is crucial to the function of your HVAC system, or of your gas furnace, in particular, to get sufficient hot air passing through the air ducts into each room of your home.

Why does my furnace make a loud noise?

Furnace blower movement results in a loud banging or booming sound due to the interaction of gas and air.

How to check if a furnace is clogging?

If your furnace is a combustion air furnace-like gas, you will have to require your professional to check on that at least in a year to make sure it is continuously burning.

Why does my furnace make a booming sound?

Most likely, the booming sound may catch up with dirty furnace burners. This is when you try to turn on the burner, and there is a delay in the ignition.

Adjust Furnace Fan Speed

The furnace fan speed is set to the optimum levels at the time of the installation by a professional. However, this need not be the case in every scenario, and sometimes, it may have been set too high. There can be a calibration error after maintenance, and this can also cause the improper setting of the fan speed.

Clean Furnace Blower Fan

Devices like furnaces, which are often kept in the basement, see huge dust buildup on them. The dust and the lack of regular maintenance of the machine can cause the dust to enter the furnace and block essential parts like the furnace blower fan.

Replace Furnace Blower Bearings

The fan blower has bearings to provide lubrication and smoothness in its operation. The ball bearings can, with time, wear off, and this can cause resistance in the furnace blower. The fan blower can heat up and, along with it, create unusual noise like an idling truck. This sound can get amplified due to the ductwork that transfers the hot air.

Check Motor Mount for Loose Connections

Motor mounts hold down the motor and hence experience a lot of force and shaking. Over the long term, the vibration can cause the screws that hold the motor to the mount to loosen up and cause noise. So, if you are hearing rattling noises from your furnace blower, try to tighten the furnace blower motor to its mount.

Tighten the Set Screw

The hot air from the furnace is driven by the furnace blower, which is a rotating machine. The furnace blower is held in place via the set screw. If the set screw is loosened, it can cause the machine to shake and hence create a rattling noise when it turns.

Change The Belt Drive

Some furnaces use belt drive motors for its operation. These belts can also experience wear and tear over many years. If it is out of alignment, or has particles stuck on to it, or has worn out, or is slipping, the belt drive of the motor may produce squealing sounds similar to that of an old car.

Try Sound Insulation Solutions

If the noise from the furnace blower can’t be solved, you can insulate it from reaching you. It is only natural for motors and heavy-duty machines to make noise. If you can still hear your furnace, you can try heat-resistant insulation solutions on your furnace to reduce the level of sound reaching you.

How Can I Reduce the Noise My Furnace Blower Makes?

The best way to reduce this noise is to get a new furnace blower and see if that helps. Like I said earlier, this is fairly common and most people don’t mind it too much. If you’re thinking about buying a repair kit for your furnace, be aware that the kit will come with some wheels and bearing parts just like new blower motors do. So you’ll have to pay attention when cleaning these parts since these can make a bad noise if they are not cleaned properly. However, the noise is similar to a repair kit and you shouldn’t be too disturbed by it.

How to Keep Your Furnace Blower from Making Unusual Sounds?

Furnace blowers are a fairly quiet part of your furnace so if your blower makes a banging or loud noise when you fire it up, there might be a good reason for this. However, you may find that the service technician will probably want to replace it anyway. The reason they do this is because if your furnace blower makes too much noise especially after the first few months of use, there’s a good chance it will cause problems with the fan which can affect performance and ultimately shorten the lifespan of your furnace.

Why is my Furnace Making Knocking Sounds?

This is usually due to something called “cushioning devices” (also known as “cushions”) that are attached to the blower motor. These cushioning devices help take some of the vibrations caused by the blower motor away from your furnace. But if they become worn out, this will make your furnace blower run louder and knock more.

What to Do If Your Furnace Is Knocking?

But if this doesn’t help, the only thing left to do is take it to a qualified technician. But if this doesn’t help, the only thing left to do is take it to a qualified technician. You can find an HVAC technician in your area by searching for one on the web with the keywords “furnace inspection” or “furnace service.”

Why Does My Furnace Make a Loud Noise When It Turns Off?

This is a fairly common noise made by furnaces these days because it’s the sound of the blower motor cutting out. It makes a loud squealing or grinding noise. This is really no big deal, but you may even find that your furnace will shut off before you are finished with your activities because it’s saving energy. Like I said earlier, this too is no big deal but it does sometimes cause errors in your thermostat settings that can be confusing to you or the people who are using the unit since they will think that something has gone wrong with the furnace and it might cause them to call an HVAC service technician just in case any damage was done to their air conditioners and/or ducts.

Why Does My Furnace Blower Have a Low RPM?

This means that the blower is making less noise than normal and this can be because of several reasons. One possibility is that your blower may be damaged. If this is the case, you’ll want to contact a service technician because replacing a blower motor can get pretty complicated sometimes. However, this doesn’t seem to be the case with you right now since it seems like there’s enough power flowing through your furnace that it should not be too difficult for you to replace your blower on your own even if it did need repair. So again, if you’re thinking about buying a repair kit for your furnace, I wouldn’t recommend it.

Where is the Best Place to Buy Furnace Parts?

This is always a tough question to answer since it depends on your home and what type of equipment you have. For example, if you have a furnace with a built in blower motor on the furnace housing, then you probably won’t need any replacement parts from them because they will be able to tell you exactly what’s wrong with your system. However, if your unit does not come with a built in blower and you find that it is in need of repair, then this will become much more difficult for you to determine what’s wrong if you don’t know for sure what has gone wrong with the blower motor. This is because everything will be coming from different manufacturers and since your furnace came from a manufacturer who isn’t well-known for making blower motors, it can be difficult to get replacement parts for it. However, there are some companies that specialize in replacement parts for all kinds of air conditioning systems and furnaces. I would recommend going to a big box store like Home Depot or Lowe’s and looking around to find a company that specializes in air conditioning systems.