Easy Steps on How to Raise Your Shower Height
- Take Out Worn Out Fittings Loosen the shower head from the bathroom shower wall. Ignore the old showerhead if you have plans to change it. ...
- Fix New Shower Accessories Wrap plumber’s tape on both linear grooves of the S pipe. ...
- Test for Correct Installation
How can I make my shower head taller?
The easiest and most affordable way to raise the height of your shower head is with an adjustable shower arm. This type of shower arm attaches to your existing shower arm pipe, acting as an extension, and then you can attach your existing shower head. (Or add a really nice rain shower head for that true rainfall experience!)
Can you raise the height of a handheld shower head?
Whether you have a handheld showerhead or want to add one, we have just the thing to make sure you can raise the height of your shower head. One thing to keep in mind is that a hand held shower head will already raise the height of your shower head, simply because of the handle part which extends about 3-5 inches on most handshowers.
Can you raise your shower head to get it wet?
No need to hang your head to get it wet, you can keep your chin up, high and proud, now that you raised your shower head. 1 Person Made This Project! mikeasaurus made it!
How do I replace a shower head?
new shower head (optional, but why not upgrade?) crescent wrench (or something to remove the old pipe nipple) toothbrush (to clean the old fittings) Unscrew the entire shower head assembly from the wall. You can leave the old shower head on if you are going to replace it. This part may require the wrench, but I was able to do it with my bare hands.
How can I make my shower arm longer?
To extend a shower arm, you will actually need to replace the entire portion of pipe between the shower head and the wall with a longer section. You can find longer shower arms at home improvement stores selling from $10 to over a $100, depending on your decorative tastes.
How do you extend a shower head inside a wall?
1:063:24Shower head cheap extension arm installation - YouTubeYouTubeStart of suggested clipEnd of suggested clipAnd apply it in a clockwise. Direction let's say about five layers and screw the shower extensionMoreAnd apply it in a clockwise. Direction let's say about five layers and screw the shower extension arm back on and see where you end up i got it tight. But it went a little bit too far to the left.
Why are shower heads so low?
Low pressure showerheads reduce the flow of water via a flow reducer and by using design features like spreading the water out through many more holes, so they absolutely work to make a more gentle shower experience if you are dealing with a situation where there is too much pressure for a pleasant experience.
How high should a shower head be placed?
As mentioned earlier, the ideal shower head height is different for different households. The experts suggest 80 to 85″ to be the ideal shower height.
How do you move a shower head to the ceiling?
4:207:05How to Install a Rain Shower Head - YouTubeYouTubeStart of suggested clipEnd of suggested clipIn our next step we'll take a 90 degree fitting put it right on our PEX pipe right here and runMoreIn our next step we'll take a 90 degree fitting put it right on our PEX pipe right here and run parallel with our ceiling joist. We'll put a crossmember in and then drop our arm down this way.
Can a shower head be too high?
Yes, a shower head can be too high for some individuals. It can make the showering process more difficult if it is exceptionally high. Shower heads that are too high will not have the spray of water covering the body adequately, making it more challenging for a shorter person to wash off the soap thoroughly.
How long should you soak your shower head in vinegar?
Let the shower head soak for several hours. For an especially dirty fixture, leave it overnight. However, if you have a brass, gold, or nickel-coated shower head, remove it from the vinegar after 30 minutes. Any longer than this could damage the finish.
How high should you mount a rain shower head?
Wall Or Ceiling Installation When installing, most rainshower heads are installed a little higher than standard showerheads at 80 inches to 84 inches from the shower floor. However, installing the rainshower head about 84 inches from the shower floor is recommended to accommodate taller users.
How can I extend my shower head?
The easiest and most affordable way to raise the height of your shower head is with an adjustable shower arm. This type of shower head extension arm attaches to your existing shower arm pipe, acting as an extension, and then you can attach your existing shower head.
What is a shower diverter?
What is a shower diverter? If you have a combo bathtub and shower, your faucet handle has a way of changing the flow of water from the tub spout up to the showerhead, and the other way around. When you use this handle, you are activating the shower diverter, which if the valve behind the wall that directs the water.
How do you attach a shower flange to the wall?
3:325:32Shower extension arm, flange, and head replacement - YouTubeYouTubeStart of suggested clipEnd of suggested clipHere I'm applying a small bead of silicone caulk against the shower flange. And the shower wall.MoreHere I'm applying a small bead of silicone caulk against the shower flange. And the shower wall. Once that's done I will wet my finger in some warm water and smooth out the caulk.
How do you change the angle of a shower head?
0:033:34Increase Shower Head Adjustability with Swivel Ball Adapter - YouTubeYouTubeStart of suggested clipEnd of suggested clipWell that's a pretty common problem that's due to the limited range of motion in the pivoting ballsMoreWell that's a pretty common problem that's due to the limited range of motion in the pivoting balls of these shower heads and a very simple solution to this problem is adding a swivel ball adapter.
Easy Steps on How to Raise Your Shower Height
Many homeowners do not think it is possible to raise your showerhead without help from a plumber. Fortunately, anyone can perform this task and even increase the distance of the showerhead from the shower wall with the following steps.
Other Essential Shower Tool to Raise a Shower Head
Although I have shown you x steps to raise showerhead tips, you can also use these tools as the best way to raise your shower head. Most of these items can be ordered at any online or local store.
Tips for using Extension Arms for Showerheads
If you want to use a rain shower head, it comes with an adjustable extension arm. This arm allows you to set the showerhead in a downward position while pointing towards you. You can also adjust it at two points: close to the wall or near the showerhead.
Why Should I Extend My Showerhead?
Apart from its discomfort for tall people, there are many reasons to raise your showerhead to a higher distance. Now let’s show you why it is a good idea to perform this task.
Final Word on the Steps to Raise Shower Head
Showerheads are vital parts of any bathroom. But when they hang low, they can become annoying for some reason. First, it means less space to hang a shower shelf. Next, tall people will feel uncomfortable with lowly placed bathroom fittings.
Step 2: Remove Old Fittings
Unscrew the entire shower head assembly from the wall. You can leave the old shower head on if you are going to replace it. This part may require the wrench, but I was able to do it with my bare hands.
Step 3: Install New Fittings
Wrap both threaded ends of your S pipe with teflon tape. Position the pipe so that it comes straight out of the wall and the top part of the S aims at the spot where you will be showering. After placing the little donut disk* along the wall, thread your S into the female pipe in the wall. Don't overtighten.
Step 4: Test It Out
I recommend a dry run to test it out. "Dry" run since you will be testing with water, but you yourself will not be in the water. Turn on the shower. Make sure there are no drips or sprays or explosions. If everything seems okay, it probably is. This isn't rocket science. Take a shower if you want. Take two.
Minimum Curb Height for Shower
In the United States, building codes typically require tile shower curb height to be a minimum of two inches above the top of the drain. However, that doesn’t necessarily mean the curb itself has to be two inches high.
Purpose of a Shower Curb
So the purpose of a shower curb is fairly obvious—it’s there to prevent water from flooding out of your shower stall into your bathroom. You may wonder why you need one—after all, the shower water goes right down the drain, and any splashes are caught by the shower door or enclosure wall, right?
Waterproofing a Shower Curb
If you’re installing a premade or manufactured one-piece shower stall, you don’t need to worry about making a shower curb, as it will likely already be part of the design. However, if you’re building and tiling the shower yourself, you will need to make your own shower curb.
What Not To Do
You may be tempted just to plop a 4×4 chunk of lumber across the shower opening, coat it, tile over it, and let that be the shower curb. However, builders usually advise against this, as larger pieces of wood like this can warp over time, bowing or twisting until they’re not an effective barrier against shower flooding.
The Curbless Shower Option
If you’re concerned about the shower curb being a tripping hazard for someone in the home, you can investigate the possibility of constructing a curbless shower.
Expert Q&A
Include your email address to get a message when this question is answered.
About this article
wikiHow is a “wiki,” similar to Wikipedia, which means that many of our articles are co-written by multiple authors. To create this article, 157 people, some anonymous, worked to edit and improve it over time. This article has been viewed 7,068,013 times.
