- 1. Lightly spray your straw cowboy hat with water.
- 2. Place your hat on a stretcher and allow it to dry.
- 3. You can choose between a full-head stretcher or choose the less-expensive stretcher that only stretches the sweatband.
- 4. Try your hat and if it does not shrink to the ideal size, repeat the steps over again.
How to stretch or reshape a cowboy hat?
Use a hat stretcher to Stretch Cowboy hat
- Make the cowboy hat wet To make the hat wet, you can spray water lightly around.
- Dry the hat Put the hat on a stretcher to dry it or you could use a full-head stretcher. ...
- Check the hat
How to make a cowboy hat larger?
Use kettle
- Arrange an area to put a kettle. Find an area of your kitchen or your yard with plentiful lighting for adjusting your hat. ...
- Fill the tea to the kettle and burn. Fill the tea to the kettle until you see the water catches the top. ...
- Remove particles in the hat. ...
- Place the hat around the kettle. ...
- Shape the hat brim and remove the kettle. ...
How can I shrink a straw cowboy hat?
Resize a Hat Using Your Own Head. Lightly spray water on your straw cowboy hat. Pull the hat onto your head and leave it on for 20 minutes. Take the hat off when the fit feels comfortable. Stuff the straw hat with crumpled newspaper, plastic bags or paper bags. An alternative would be to leave the hat on your head.
How to shape the Crown of a cowboy hat?
Shape your palm leaf cowboy hat. After the hat (or portion of the brim) has soaked, pull it out form the basin and shape the brim. Slowly fold the brim until it's bent in the shape you want. If you'd like to change the shape of the hat's crown, you can soak and shape that portion of the hat also.
How to reduce hat size?
How to get hat size down?
What to do if a hat doesn't look funny?
How many sizes can you lower with a sizing roll?
Where to place sizing strips on a head?
Can you cut felt for a hat?
Can you shrink a leather hat?
See 2 more
How can I resize a cowboy hat at home?
0:141:30Hat Too Small? Not a problem. Tips & tricks to make your hat fit perfectly!YouTubeStart of suggested clipEnd of suggested clipIf you want to expedite it make a little bit easier on a hat you can actually introduce some steamMoreIf you want to expedite it make a little bit easier on a hat you can actually introduce some steam through a kettle into the Hat area to make it soft.
How do I make a too big hat smaller?
0:552:14How To Resize a Hat That's TOO BIG! - YouTubeYouTubeStart of suggested clipEnd of suggested clipYou can get the foam weather stripping at your local hardware store it usually comes in variousMoreYou can get the foam weather stripping at your local hardware store it usually comes in various widths I just got the cheapest one that I can find it was about eight dollars for the package.
Can you change a cowboy hat size?
Instead, take your cowboy hat to a professional hatter to stretch it out and increase the hat by a full size without contorting its shape. Although a professional is preferred, it is possible to stretch a cowboy hat on your own at home.
How do you shorten a hat size?
2:4112:22HOW TO SHRINK YOUR FITTED HAT - YouTubeYouTubeStart of suggested clipEnd of suggested clipYes it's a paper towel you're gonna take one square of paper towel. And you're gonna fold it down toMoreYes it's a paper towel you're gonna take one square of paper towel. And you're gonna fold it down to basically match the width of your lining. Over here. So this is going to be folded down to match
How do you shrink a hat in the oven?
Follow these steps in order: Wash the hat with a small amount of laundry detergent in the sink. ... Preheat your oven to about 300 degrees Fahrenheit. Take a hot shower - as hot as you can make it without scalding yourself - with the hat on. ... Put the hat in the oven immediately.More items...•
How can I get my hat to fit my head?
StepsHeat up the tea kettle or pot of water until the water begins to boil.Hold the hat's brim to get a good grip. ... Remove the hat from the heat for 30 seconds. ... Turn on the hairdryer to its highest setting. ... Once it's mildly damp, wear the hat and let it air dry to stretch into the right size for your head.
Can you resize a Stetson cowboy hat?
Answer. No, not really. A fur felt hat can be taken down one full size, but not increased. A hat retailer might be able to stretch the hat a little, but when you stretch a hat, after a time, it will go back to its original size.
Should a cowboy hat fit tight?
The perfectly fitting cowboy hat will be snug around the front and back of your head, and a little looser around the sides. You should be able to easily take off and put on your hat, but your cowboy hat shouldn't easily blow away in a small breeze.
Should my hat touch my ears?
Before purchasing a hat, it's important to know how to determine hat size. In general, a hat should rest 1/8 inch above your ears. Follow these steps that detail how to measure hat size: Cut a long piece of string -a little over two feet if your head is large.
Does hat size change with weight loss?
The other thing that people don't realize is if you lose weight or if you gain weight, your head size changes. So if you've lost a lot of weight, your hat may feel very big on your head, but not to worry. You bring it in and we'll make it smaller for you. If you gain weight, we'll make the hat larger.
Can you get a hat tailored?
A fitted hat has a smooth back and accommodates your hair nicely, but fitteds don't allow for adjustments for those with heads that are in between sizes. Don't let your hat become a hassle. Instead, shrink your fitted hat so it molds to your head and provides a more custom fit.
How do you use hat tape?
0:442:11How To Resize Your Hat Using Hat Sizing Tape - YouTubeYouTubeStart of suggested clipEnd of suggested clipWe're just going to stick them right underneath the band. All right so I put them on the sidesMoreWe're just going to stick them right underneath the band. All right so I put them on the sides because that's where most people have the problem right above the years.
Do hats shrink in the dryer?
With a little know-how, you can easily size down your hat for the perfect fit. To begin, you must determine the hat's material. If it's made of cotton that is not preshrunk, the natural cotton fibers will easily shrink in the washing machine and dryer, even in low heat. You could also wash baseball hats by hand.
How do you make a baseball hat smaller?
Place the cap in the washer. Load the cap into the washer by itself or with other clothes. Use a small amount of laundry detergent to clean the cap as you shrink it. If you're washing the cap by itself, make sure to set the washer to the smallest load setting so that the wash and rinse cycles don't use too much water.
How do you shrink a snapback hat?
Steam Your Hat to Size Start by filling a medium-sized pot with water and place it on the stove. Next, turn the heat to high until the water boils and turn off the stove. Hold the cap by the brim and place it six inches away from the pot's steam. Let the steam seep inside the cap and band for 30 seconds.
Can you shrink a cotton hat?
Put your hat in your dryer on the hottest setting, either on a drying rack or on tumble dry. The tumbling action aids in shrinkage, so using heat with the tumble dry setting offers the most opportunity for shrinkage.
How to Fix a Cowboy Hat That Is Too Big | Our Everyday Life
Cowboy hats are often associated with the American Old West era, but they are also contemporary pieces that add style and a touch of fun to your outfits. Cowboy hats may be made from felt or straw, and they have a broad brim that keeps the sun out of your eyes.
How to reduce hat size?
Nothing beats decades of experience sewing and making hats. The best way to reduce your hat size is to send it to a hat shop for a size reduction. What most hatters will typically do, and some advanced hat aficionados have taught themselves to do, is they remove the sweatband from the hat and either altering the preexisting hatband or replacing it with a new smaller one. We do offer professional sizing services if interested.
How to get hat size down?
If you need to get your hat size down 1 size or less we recommended purchasing a Hat Size Reducer Strip. These are simply foam strips with an adhesive backing that goes on the side of the hat behind the sweatband. Searching online will reveal a number of options. We recommend using a reducer strip that has denser foam and uses a gentle adhesive. Too strong of an adhesive will leave behind residue and can crack the straw, we highly discourage using foam weather strips for this reason.
What to do if a hat doesn't look funny?
The first thing you should do is be honest with yourself and decide if the hat doesn’t look funny on you. Wearing an oversized hat can be a bit more comical compared to a hat that simply is just too tight on you. But if the hat is just slightly too loose then there are a couple things you can do to get the perfect fit.
How many sizes can you lower with a sizing roll?
The sizing roll can be applied to the total circumference of the hat to lower the size up to 2 whole sizes. However, as initially stated, big hats can look comical so always take a look in the mirror first and decided if it is worth it.
Where to place sizing strips on a head?
For most heads, the optimal position for the strips is at the front and back of the crown.
Can you cut felt for a hat?
Like a temporary reducer strip, you can cut felt or tissue paper to provide a quick size reduction. You will want to switch it out at the end of the night so that the sweat doesn’t stay within your hat.
Can you shrink a leather hat?
And you only need to reduce a tiny bit, then a little water and patience can make this happen. Leather will naturally shrink when exposed to water. You can use this to your advantage if you need to reduce your hat’s size.
How to get hats down to size?
Perhaps the easiest way to get your hat down to size is using hat tape, also called hat size reducer. Unlike double-sided tape, which could ruin the sweatband by tearing at the material, hat sizing tape only has adhesive on one side with a foam strip on the other. Most often pre-cut, these hat sizing strips can be purchased online or at most hat shops. You could also check your local hardware store for small strips of foam padding material as an option.
How to downsize a hat that is too big?
Another simple solution to downsizing a hat that fits a little too big is elastic. Sometimes called waistband elastic, these small, inexpensive stretchy strips can be found at any fabric store or crafts shop like Michael's. You might also be able to find a piece in those free sewing kits you get at hotels and such. (Don't pretend like you've never taken one home before.) This method uses basic needlework, so if you're all thumbs, find someone who can assist. It's really not that hard.
How to make a sweatband hat?
Pick a thread color that matches the sweatband and thread the needle. Sew one edge of the elastic securely to one side of the sweatband. Make a strong knot after sewing to reinforce the thread from getting loose. Repeat this on the other side. Try on the hat to confirm the size is to your liking.
How to fit a hat sweatband?
Cut the elastic to the size that you need to fit from one side of the hat sweatband to the other. This should not be done at the center of the hat — do it closer to the back where it will only take up a little space.
How to get a hat off your head?
Once you find the sweet spot, remove the protector from the adhesive side of the foam strip and firmly press it underneath the sweatband. Repeat the process with each strip.
Where to place hat reducer tape?
This could be the front, back, or both sides or all of the above. Make sure to place the hat reducer strips underneath the sweatband (not on top) and try on the hat.
Can you puncture a sweatband on a hat?
Make sure you're OK with that and that the sweatband can handle being punctured by a needle.
What does the X on a cowboy hat mean?
What's that X mean? That X tells you that those hats are made of a higher quality, denser fabric—or in the case of our straw hats—finer weaves and smaller fibers to last you longer than the average hat.
What is the best hat for water resistance?
Leather or suede cowboy hats are the go-to hats for water resistance and are extremely durable. The downside is they aren’t as breathable in the summer and can be very hot.
Where to put measuring tape on your head?
Wrap the tape measure or string around your head. Make sure to lay the measuring tape or string about midway on your occipital bone (that little bump in the middle of your head at the back.)
Can wool hats be used in wet weather?
Wool hats are probably best used in dry climates without a lot of rain or humidity and they aren't recommended in wet conditions —unless, of course, your wool hat is pre-treated with a water repellent. Wool is definitely a good choice for keeping you warm, too.
Why do you need to reduce the size of a hat?
In some cases, you may prefer to reduce the size of a hat or make it fit better because you've simply fallen in love. That's where hat sizing tape comes in.
How to measure hat size?
Cut a strip of sizing tape at the approximate circumference of the inside of your hat. Many times you only need enough for each of the sides as this is where most people have a sizing problem.
How to make a hat look better on your head?
When you are comfortable with how your hat feels and looks on your head, take the sizing tape out while taking note of where the strips were placed. Now carefully peel the back off and then affix the pieces back underneath the inner-liner.
What is a hat size tape?
Hat sizing tape, or often called hat size reducer, is commonly used in our stores to reduce the size of any particular hat about one full size. It comes in the form of a foam strip with an adhesive backing. While it is always better to try to find the right size hat for your head, there are occasions where you like a particular hat but it is only one size or only comes in half sizes, i.e. (SM/MD, LG/XL).
How to extend the life of a white hat?
However, you can help extend your hat's life by cleaning it correctly, especially if it's white. Hold your hat by the brim, not the pinch or crown. These components are easily misshapen or crushed. To adjust your hat or put it on, use four fingers to hold the brim's front and back just next to the crown.
Why do you put foam under a hat?
As stated in the first step, it is best practice to insert the foam strip underneath the band in order to: A) disguise that it is there at all, and B) to retain the original fabric as the liner between your head and the hat.
Why do people wear hats?
A hat can give you a sophisticated air of grace or an aura of dignity. It can complement your wardrobe to provide you with a commanding, stylish appearance. Your favorite headpiece can help you express your unique style and even protect you from the sun's rays.
How to keep a hat from getting loose?
Place the hat in a dryer set for a maximum heat cycle. If the hat still feels a little loose, move it immediately from the oven to the dryer. Set the dryer to the hottest setting and the longest cycle available. Let the hat cool before wearing it again.
How to shrink a hat?
Most hats aren't exact fits for every head, so knowing how to shrink them is a useful trick. Shrinking a hat involves water and heat. Hats made from resistant fibers like cotton and polyester stand up better to extreme heat from dryers and ovens. More delicate material, such as felt and straw, needs to be steam-treated or heated carefully. The alternative to treatment is adhesive foam sizers, leading to the perfect fit without damaging a good hat.
How to dampen a hat?
Spray the sides of the hat with cold water. Load a misting bottle full of cold water, then use it to dampen the outer portion of the hat. Spray the sides and back, but don't soak them. If your hat doesn't have a bill, also mist its front end.
How to make a hat fit better?
Dry out the hat and heat it to shape it again. Set the hat aside in a spot with good air circulation but not a lot of heat or direct sunlight. When the hat feels dry to the touch, test it out. If it is still a little loose, dampen it and steam it again. The hot steam will cause it to shrink a little each time.
Why do hats shrink?
Exposing the hat to sunlight or hot water causes the fabric to shrink down to its natural size. Wearing the hat improves the fit even if you choose not to risk the oven or dryer. To speed up this process, try wearing the hat during a hot shower, for instance. Keep it on until it dries.
How to make a hat lose shape?
Concentrate the heat on the main portion of the hat rather than the brim. Most hats have an elastic band or sweatband in the brim, and heating it causes it to lose shape over time.
How to reshape a hat?
Spray the hat with cold water. Moisten the fabric before attempting to reshape the hat. Fill a spray bottle, then lightly mist the exterior portion of the hat. Get the hat damp, but don't soak it. Make sure it isn't dripping moisture.
Why it is important to know the right size before you buy a cowboy hat
If you want to buy a new cowboy hat, it is important to know the correct size. This way, you will avoid purchasing the wrong size and will avoid problems.
Cowboy hat size chart
A cowboy hat sizing guide is a reference table or chart that helps cowboy hat shoppers to find their correct sizes. Different brands will have different charts, so you need to bear this in mind to avoid getting mixed up with multiple charts. To determine your hat size, measure your head circumference using a string or sewing measuring tape.
How to choose the right cowboy hat size
A cowboy hat fits the head naturally, so if you don’t know the exact size, try on a hat with a normal-sized brim and see how it looks. If it doesn’t fit, order one with a smaller brim and try it on again. Remember, this can’t be done on a head measurement. You should also take measurements of your finger and head so you’ll know the proper size.
How to measure, how to find your cowboy hat size
When you are shopping for a cowboy hat, the first thing you should do is determine your head size. The first step is to measure the circumference of your head. You should start by measuring from the forehead. A brim that’s too narrow or too wide will not look good on you.
Conclusion
Choosing the correct size for your hat is important – you should focus on finding the right size before you actually buy. Generally, if your head circumference is more than 23 inches, you should go up one size. Alternatively, if you are small, you can choose a small brim to make the rim fit.
How to reduce hat size?
Nothing beats decades of experience sewing and making hats. The best way to reduce your hat size is to send it to a hat shop for a size reduction. What most hatters will typically do, and some advanced hat aficionados have taught themselves to do, is they remove the sweatband from the hat and either altering the preexisting hatband or replacing it with a new smaller one. We do offer professional sizing services if interested.
How to get hat size down?
If you need to get your hat size down 1 size or less we recommended purchasing a Hat Size Reducer Strip. These are simply foam strips with an adhesive backing that goes on the side of the hat behind the sweatband. Searching online will reveal a number of options. We recommend using a reducer strip that has denser foam and uses a gentle adhesive. Too strong of an adhesive will leave behind residue and can crack the straw, we highly discourage using foam weather strips for this reason.
What to do if a hat doesn't look funny?
The first thing you should do is be honest with yourself and decide if the hat doesn’t look funny on you. Wearing an oversized hat can be a bit more comical compared to a hat that simply is just too tight on you. But if the hat is just slightly too loose then there are a couple things you can do to get the perfect fit.
How many sizes can you lower with a sizing roll?
The sizing roll can be applied to the total circumference of the hat to lower the size up to 2 whole sizes. However, as initially stated, big hats can look comical so always take a look in the mirror first and decided if it is worth it.
Where to place sizing strips on a head?
For most heads, the optimal position for the strips is at the front and back of the crown.
Can you cut felt for a hat?
Like a temporary reducer strip, you can cut felt or tissue paper to provide a quick size reduction. You will want to switch it out at the end of the night so that the sweat doesn’t stay within your hat.
Can you shrink a leather hat?
And you only need to reduce a tiny bit, then a little water and patience can make this happen. Leather will naturally shrink when exposed to water. You can use this to your advantage if you need to reduce your hat’s size.
