What is the average height of a pedestal sink?
A standard pedestal sink is usually 22 to 24 inches wide and about 33 to 34 inches tall. The pedestal base usually is about 11 to 12 inches wide. If the area where you mount the faucet is raised, then the tallest point bumps up a bit. It can reach closer to 35 or 36 inches tall in this area.
How to fit a pedestal sink?
- You need to first mark the center point or line of the pedestal sink to be able to figure out the exact place it needs to be.
- Make sure that the water lines come together with the pedestal sink’s faucet holes.
- You need to mark its height on the wall of your bathroom.
What size sink can I put in a 33in cabinet?
To determine the maximum sink size for your base cabinet, measure the interior of your cabinet and subtract two to three inches from each dimension. A 36″ base cabinet can handle a 33″ sink at most; a 30″ cabinet should be fitted with a sink no larger than 27″ wide. The average 24″ sink base cabinet comfortably accommodates a standard 22″x30″ sink; be sure to consider the depth of your sink when planning storage inside the base cabinet. Still unsure?
How to install an elegant pedestal sink in one day?
Install support blocking: since the sink portion of a pedestal sink is attached to the wall, you'll need to attach a cleat between the wall studs to support it properly. Start by locating the wall studs with a stud finder, and then remove only enough wall covering to expose the studs.
How much space is needed for a pedestal sink?
A minimum clear floor space of 30x48 inches should be provided in front of the lav. Up to 19 inches of the 48-inch floor space can extend under the lav when a knee space is provided. The minimum clear space from the centerline of the lav to any side wall is 15 inches.
What is the best depth for a bathroom sink?
Five to eight inchesIf a bathroom sink is too shallow, splashing is more frequent and you won't be able to fill the sink for any reason. Another reason for these heights is the accessibility. Five to eight inches seems to be the most accessible depth for everybody.
How is a pedestal sink measured?
The length measurement of a pedestal sink is taken from one side of the sink to the other, running in a parallel line to the wall where it is fitted. If you are standing directly in front of the sink and facing the wall, you can take a measurement from the upper lip of the sink from left to right or right to left.
How wide should a bathroom pedestal sink be?
A “standard” pedestal sink measures roughly 22 to 24 inches wide and 29 to 34 inches tall. They hit about hip height on an adult. Though pedestal sinks have a reputation for offering little surface area for bathroom items, wider models include space for small items.
What is the normal depth of a bathroom vanity?
The standard vanity depth is 21 inches. But you can gain floor space in a small bath by trimming at least part of the vanity to 18, 15, or even 12 inches deep.
What is the depth of a basin?
The size of a drop-in sink is based on the size of the countertop. Typical round vanity sinks are 16″ to 20″ in diameter (oval shapes may be wider). Basin depths are typically 5-8″.
Are all pedestal sinks the same height?
Standard Sink Heights For example, pedestal sinks are built between 29 and 33 inches high, while bathroom vanity cabinets with set-in sinks range from 30 to 36 inches in height. Kitchen sink heights can also vary as much as 10 inches, between 29 to 39 inches high, depending upon the height of the people in the home.
How far should sink be from wall?
Lavatory placement The bathroom lavatory, or sink, should be placed far enough from a wall or shower wall that it's comfortable to use and easy to clean. The NKBA recommends 20″ measuring from the center of the lavatory to the wall. Code is a minimum of 15″ (with 4″from the edge of a pedestal sink to the wall).
Do Pedestal sinks have P traps?
Pedestal sinks provide a simple yet classic and space-saving look to a bathroom. But the P-traps in them can be trickier to access than those that are readily visible underneath the sink in a vanity or kitchen base cabinet.
Are pedestal sinks outdated?
Pedestal sinks have made a huge comeback in recent years. What used to be thought of as only a vintage piece is now finding a home in modern and contemporary design. A pedestal sink is composed of two parts; the leg, which it stands on, and the sink basin that both come together to form this vintage piece.
How do you hide pipes behind a pedestal sink?
How To Hide Pipes Behind A Bathroom Sink [7 Great Methods]Install a cabinet.Hide pipes with a storage bin.Construct a small shelf.Add a few potted plants to the decor.Build a mini wall-cover.Install a sink skirt.Install pipe coverings.
Can any sink go on a pedestal?
For starters, pedestal sinks work perfectly in any bathroom where space is limited, including half baths and powder rooms. Bathrooms that aim for an early 20th century period style also can be a great fit for a pedestal sink.
How do you measure a sink to replace it?
0:372:45Measuring for a Top-Mount Sink Replacement - YouTubeYouTubeStart of suggested clipEnd of suggested clipThe length and width of the cut out. Any new sink you select should be larger than the size of theMoreThe length and width of the cut out. Any new sink you select should be larger than the size of the cutout in order to properly cover the hole. Finally measure the length of the base cabinet.
How do you measure a bathroom sink for replacement?
Here's how to measure for a basinStart with the width. Measure the distance from one side of the basin to the other.Next, measure the length. This is the distance from the rear of the basin to the front.Then, on the exterior of the basin, measure from the top to the bottom. ... Finally, measure the depth.
How do I know what size vanity sink I need?
Rectangular or square sinks will be measured by length and width. Typically if you are measuring out your space for a sink, you should take the interior width and length of the install space, most commonly a cabinet or vanity against the size of the the actual sink.
How do you measure a wash basin?
Tips for size: To measure the Wash basin dimensions for a semi pedestal model, you need to measure the height from the foot of the semi pedestal to the tap. To get the width you have to measure the two corners of the lavatory.
How deep should a small pedestal sink be?
So you can choose a small pedestal sink which is 19 inches wide, 17 inches long and 5 inches deep. In a situation like this, you also have the option to go for a wall- mount sink or for a corner sink.
How wide is a pedestal sink?
The width applies to the distance from the front to the back of the sink. It varies between 19 inches to 24 inches.
How much space do I need for a bathroom sink?
For a single bathroom sink, at least you should install 30-inch vanity. That will leave 4 – 5inches of space on the counter too. If you choose a pedestal sink or a wall mount sink with less enough counter space, you can always add a nearby tower for extra storage. I think it will maximize the space of your bathroom. If not, you can choose a 36 – 48-inch vanity.
How wide is a drop in sink?
Drop in bath sink sizes range from similar to undermount like in the range of 16 to 24 inches wide and 12 to 20 inches from front to back. In these sinks, the rolled edges that allow the sink to be dropped down into a countertop opening also add to its overall size.
How big should an undermount bathroom sink be?
But usually, undermount bathroom sink should not exceed 30” in width and 22” in depth.
What are the different types of bathroom sinks?
Common bathroom sink types include vanity and countertop sinks like drop-in sinks, undermount sinks, vessel sinks to standalone pedestal sinks and wall hung sinks.
How many holes are there in a bathroom sink?
Generally, bathroom sinks come with one or three ready-made holes. If it has three holes the spacing can also be different to suit different 3 hole faucet holes. So you need to consider your sink faucet choice to make sure the sink you want has the correct number of faucet holes and spacing in-between.
How much counter space does a pedestal sink have?
By contrast, bathroom sink vanities offer countertop space ranging from 24 inches to 60 inches and even more.
What is a pedestal sink?
Pedestal sinks consist of an upper basin and a lower shaft (pedestal). Pedestal sinks are largely made of porcelain. Pedestal sinks are composed of two physically separate elements that are attached during installation.
What are the drawbacks of pedestal sinks?
The clean, airy look of pedestal sinks come with a significant drawback: no counter space. Many pedestal sink lavatories have almost no flat space for setting down a razor or makeup. This alone can make pedestal sinks a poor choice for heavy bathroom users. Some models do offer limited counter space via an apron around the basin bowl, with square sinks usually featuring the largest aprons. By contrast, bathroom sink vanities offer countertop space ranging from 24 inches to 60 inches and even more.
What is a good fit for a pedestal sink?
Bathrooms that aim for an early 20th century period style also can be a great fit for a pedestal sink. Many new pedestal sinks are modeled after traditional styles, offering an authentically vintage look in a new unit. Regardless of the style, pedestal sinks give your bathroom an airy, open look, in contrast to the bulk of a vanity cabinet.
Which is better, a pedestal sink or a half bath?
Pedestal sinks are better suited to some types of bathrooms over others. For starters, pedestal sinks work perfectly in any bathroom where space is limited, including half baths and powder rooms .
Can you put a pedestal sink in a bathroom?
In fact, for a truly authentic period style, it would be unthinkable to install anything but a pedestal sink; a bathroom vanity cabinet would be bulky, boxy, and anachronistic.
Is a pedestal sink good for a bathroom?
A pedestal sink might be perfect for your bathroom if any or all of the conditions apply: You like a more traditional look. The bathroom is small and you're looking for ways to carve out more space. You're either redoing the bathroom floor or there is already continuous flooring across the intended installation area.
What is a pedestal sink made of?
Today, you can get a pedestal sink made from an incredibly wide array of different materials including stainless steel, copper, glass and stone. You can also choose a sink made of china or a solid-surface material.
What are the pros and cons of pedestal sinks?
The Pros of Pedestal Bathroom Sinks. Pedestal sinks make an excellent choice when you're designing within a small bathroom or powder room. These sinks have a much smaller footprint than vanities and console sinks, making them excellent space savers.
How much does it cost to install a vanity sink?
A vanity sink, in comparison, costs between $130 and $280 to install. If you buy a vanity sink, however, you'll also need a vanity cabinet. Small single-sink vanities start at about $150 but can be much more expensive. If you're replacing only the sink, a pedestal sink will likely cost more.
How many holes are there in a sink?
Some sinks have a single faucet hole for use with a single-handle faucet, while others feature three holes to accept a faucet and two handles. A standard three- hole configuration spreads the holes across a span of 4 inches, while a wide configuration spaces them 8 to 16 inches apart. Advertisement.
Can a pedestal sink be used as a vanity?
A pedestal sink can eliminate bathroom clutter, but it does so by removing storage space. If your bathroom sees a lot of traffic or hosts a large family, you may be wiser to choose a vanity with lots of storage space instead of a pedestal sink.
Do pedestal sinks come in two pieces?
Note also that most pedestal sinks come in two separate pieces: the sink itself and the pedestal. Because you purchase each piece separately, you have even more freedom to mix and match the styles and components you like. As with any sink, you can also choose your faucet accommodations.
Is a pedestal sink structural?
The pedestal is decorative rather than structural, and most of the sink's weight is actually support ed by structural lumber within your wall . If you're doing a full bathroom remodel or feel confident in your DIY ability, a pedestal sink can still make an excellent choice.
What is a small pedestal sink?
The small pedestal sink is a standalone sink that is commonly installed without vanity or cabinet top. For the slimmer size, this sink type is perfect for small bathroom space. Consider the measurement of the pedestal sink before you install it. Every measurement applies to different sink part.
What measurement do you use to measure a pedestal sink?
The mounting measurement of the faucet is another measurement come across when you choose a pedestal sink size. The measurement will determine which faucet that will be best fit when it is installed to your pedestal sink. Most types of pedestal sinks come with holes for faucet installation.
Do pedestal sinks have holes?
Most types of pedestal sinks come with holes for faucet installation. When you choose faucets for the sink, it means that you should measure the size and make sure it will fit the hole on the sink. By knowing the exact measurement of the small pedestal sink, you will know whether the size will perfect for the space available inside your bathroom.
How high is a pedestal sink?
Like most other pedestal sinks, it has an overflow hole to prevent water spillage. This pedestal sink is 34 inches high, which is high enough for most adults yet within easy reach for children. Rim space, however, is limited, allowing for little more than a toothbrush and toothpaste.
What is a pedestal sink made of?
There is a lot to consider before buying a pedestal sink, however. Most models are made of ceramic or vitreous china, although there are some that are constructed of glass, metal, or granite. Their dimensions can vary greatly as well; some models are significantly higher, longer, or deeper than others.
What colors does the Veer sink come in?
The Veer sink comes in nine different china shades including white, biscuit, dune, black, thunder gray, ice gray, almond, sandbar, and cashmere. Further, it’s available with a single faucet hole or three holes and either 4-inch or 8-inch faucet centers.
How deep is a sink basin?
The sink basin is also available in three sizes. The basin is rectangular and 5 inches deep. Three overflow holes are integrated into the design to prevent splashing and spilling over. Rim space is also reasonably wide, allowing for roughly 3 inches of space on each side for toiletries and personal effects.
What is a Kohler pedestal sink?
The Veer ceramic pedestal sink by Kohler is stylish yet simple. Made of vitreous china, it has a sleek contemporary design without frou-frou embellishments. It is 35.5 inches high and comes in either a 21-inch or 24-inch sink width. In fact, buyers can customize more than its dimensions. The Veer sink comes in nine different china shades including white, biscuit, dune, black, thunder gray, ice gray, almond, sandbar, and cashmere. Further, it’s available with a single faucet hole or three holes and either 4-inch or 8-inch faucet centers.
How deep is a 5.5 inch sink?
The sink’s rectangular basin is 5.5 inches deep and has three 4-inch centerset faucet holes as well as overflow outlets to prevent spillovers. With a height of over 37 inches, the sink is high enough to prevent stress on the back while washing hands but may be too tall for families with young children.
What is a centerset hole?
Centerset holes are for single-handle faucets, while sinks with three holes accommodate faucets with separate temperature controls . Pedestal sinks’ colors and rim space also differ from one design to the next. Finding the best pedestal sink for your bathroom involves making more decisions than you might have imagined.
What materials are used for pedestal sinks?
I think it’s super cool you can buy pedestal sink basins in a variety of materials including ceramic, glass, granite/stone and metal. The array of designs and materials is impressive allowing you to make your bathroom look terrific just from the pedestal sink you choose.
What is basin width?
Basin Width. Basin width refers to the width of the basin (i.e. indebted) portion of the pedestal sink. 2. Basin Length. Basin Length refers to how deep the sink is. 3. Overall Width. Overall width refers to the width of the entire unit.
What is a three hole faucet?
A three hole faucet has the spout plus two knobs for water control. A single hole faucet has water control built into the spout. 2. Colors and Finish. There are several pedestal sink and finish options available. The following is a chart setting out the most popular colors and finishes. 3. Pedestal Sink Materials.
Is a pedestal sink still popular?
Despite all the advances in bathroom vanity designs in recent years, the pedestal sink is still enormously popular as a sink option in bathrooms, especially powder rooms (i.e. smaller bathrooms). While on the face of it pedestal sinks may seem fairly basic, the fact is the variety of options is enormous. Pedestal sinks vary in size, color, finish, ...
Can you use a pedestal sink in a powder room?
While our gallery of bathrooms with pedestal sinks showcase some primary bathrooms with pedestal sinks, generally pedestal sinks are used in powder rooms. The reason for this is it’s nice to create a showcase with your powder room (often used by guests) and you don’t have the same bathroom storage requirements in a powder room.
