A good length for a strainer post is seven feet with three feet in the ground, but an extra six inches of depth can be allowed for corner-posts and gate-posts. How far should a strainer post be? 3 metres between posts should be enough to keep your cattle in on hilly ground. Any topography changes should be taken care of by a strainer post.
How deep does a fence post need to be?
Concrete fence posts are slightly different, still keep with the hole width of 3 times the width of the post, but the depth needs to be at LEAST 2 foot. In some instances upto 3 foot would be absolutely perfect.
What size strainer post do I Need?
The strainer post is subject to vertical and horizontal forces, so it’s critical that they’re installed correctly. The deeper the post is set, the greater its load capacity. A post set at 1m (42“) has about double the capacity of one set at 750mm (30“). What Length Should My Stay Be?
What is the minimum distance from the edge of a post?
The edge of the hole shall be at least 3 1/2 inches (9Omm) from the edge of the concrete or masonry. Assuming minimum concrete strength, check to see if reinforcing is required between edge and hole, and the depth to which post shall be set to achieve full post strength. Where required, a post shall be strengthened by internal reinforcement."
How far should post holes be from the concrete floor?
the quote below was taken from the structural design section at about midpoint. "When a railing system is to be set on an existing floor, post holes shall be drilled with a core drill. The edge of the hole shall be at least 3 1/2 inches (9Omm) from the edge of the concrete or masonry.
How deep should post be driven?
The depth of the hole should be 1/3-1/2 the post height above ground (i.e., a 6-foot tall fence would require a hole depth of at least 2 feet). Add about 6 inches of QUIKRETE All-Purpose Gravel into the bottom of the hole.
How often do you need strainer posts?
Mark out key areas: the end of your fence, any corners, gateways, or changes in topography. That's where you put your strainers. Inline strainer posts should be included after every 5th picket to ensure a strong fence. (Potentially after every 3rd or 4th picket if you have rowdy cattle!)
How do you dig in strainer post?
0:113:41How to dig in a strainer and fit strut by hand FV - YouTubeYouTubeStart of suggested clipEnd of suggested clipTension. A good tight fit is required for the breastplate which will be nailed to the strainer postMoreTension. A good tight fit is required for the breastplate which will be nailed to the strainer post and cut to the desired length to suit the hole and ground conditions.
How far down does a post need to be?
The general rule of thumb when setting a post is that the depth of the post's hole needs to be one-third to one-half of the actual above-ground height of the post. So, a six-foot-high finished post ideally needs to be buried three feet into the ground.
How far apart do you put fence posts for cattle?
Fence posts need to spaced 50-100 feet apart. Using the right energizer. They suggest 1 joule of output per mile of fence. Space your ground rounds far enough apart.
What is the maximum distance between fence posts?
8 to 12 feetMost fence posts can be spaced 8 to 12 feet apart. While this is a general criteria, it doesn't cover all scenarios. For instance, high tensile fence can have larger spacing, requiring line posts every 15 to 20 feet for field fence styles, and as much as 20-30 feet for high tensile barbed and smooth wire.
How deep should an 8 foot post be in the ground?
about 2 feet deepHow Deep Should a Fence Post Be? For an average fence post, about 6 to 8 feet tall, prepare to dig a post hole about 2 feet deep. To install a fence post, you'll need a shovel or post digger, a 6-foot level, soil, and gravel or crushed stone. For gateposts, you'll need concrete too.
How deep should stock fence posts be buried?
Erecting posts and stakes Straining posts are to be dug in to a depth of at least 90cm, properly rammed, firmed (using stones where necessary) and strutted in the line of the fence.
Should fence posts be set in concrete?
Concrete provides a strong foundation for wooden fence posts, but can rot them more quickly. Setting them in dirt, with or without gravel or crushed rock depending on your soil type, can help the posts last longer before going rotten. You can also use metal fence post anchors to prolong their life.
How do I keep my post level while concrete dries?
You need to level it in two directions with a 4-foot level. After getting it straight in the first direction, hold one of the braces against the post and drive a single screw to connect the brace to the post. You can then level and brace the post in the other direction and begin filling the hole.
Can a fence post be 1 foot deep?
Especially since posts are responsible for supporting the rest of the fence, including panels and heavy gates, you must make sure that you buy a long enough post for your purposes and bury it deep enough. In most circumstances, a 1-foot hole will not be deep enough to provide proper support.
Why do fence posts rot at ground level?
Wood fence posts will rot due to prolonged exposure to moisture in the soil.
How long is a fence strainer post?
The strainer post should be no less than 150 to 200mm in diameter and buried 1 metre into the ground. The stay is of similar diameter to fence posts (100 to 125mm), its length is determined by the position on the strainer.
How far apart should fence posts be Australia?
2m to 2.7m apartPosts are usually set 2m to 2.7m apart for a fence up to 1.8m high. To make sure all the posts will be in a straight line, set both corner posts first. Dig holes 600mm deep x 300mm square. For fences higher than 1.8m, set your post about 1m into the ground.
What does strainer post mean?
A post, usually at the end of a length of wire fence such as a stock fence, to which the wire is strained taut. fence, post, stock fence.
How do you tension a wire without a strainer?
0:425:41Fixing a Fence Using Only Pliers - YouTubeYouTubeStart of suggested clipEnd of suggested clipSo I've just got a set of mild two and a half mil fencing wire so the first thing we can do is useMoreSo I've just got a set of mild two and a half mil fencing wire so the first thing we can do is use this part of the fencing pliers. To pull out our old staple.
How deep should a concrete fence post be?
Concrete fence posts are slightly different, still keep with the hole width of 3 times the width of the post, but the depth needs to be at LEAST 2 foot. In some instances upto 3 foot would be absolutely perfect. The reason the holes have to be deeper for concrete, is because of the sheer weight of the posts.
How to find 1/3 of a post?
So to find a 1/3 you would just divide the desired post height above ground by 3 (i.e a 6ft post height divided by 3 would equal 2, so a 2 foot hole would need to be dug).
How Long Will a Fence Post Last In The Ground?
Concrete fence posts have a life expectancy of about 25 years with minimal maintenance, but they aren’t immune to wear and tear. Over time rain and wind will eat away at them causing cracks and chips.
What Is The Best Timber For Fence Posts?
The most common species of wood grown in the UK are Larch, Douglas fir, Pine and Spruce (a white wood).
Why do concrete posts have holes?
The reason the holes have to be deeper for concrete, is because of the sheer weight of the posts .
How long do wood posts last?
Wooden posts vary, from 5 years to 20 years, But it all boils down to how they were installed and maintained.
Are Concrete Fence Posts Better Than Wood?
Concrete fence posts are indeed better than wood for last ability, and they easily pay for themselves over time.
How high should a fence post be?
As a general rule of thumb, you’ll need to place at least 1/3 the height of the post in the ground. For example, a 6-foot tall fence will need at least 2 feet of post in the ground. Consider the frost line in your area. The bottom of the post needs to sit below the frost line (consult local codes for exact requirements).
What to do before digging a fence post?
Before you dig, be sure to call your local utilities company to mark any underground cables. Also, reassess your fence layout and make sure your posts are where you want them. Taking steps to properly plan your fence project before digging your first post hole will save you time (and headaches) in the long run.
Is digging a hole in a fence hard?
Digging post holes is hard work. But it’s work that’s crucial to the long-term performance of your wood fence. Posts form the backbone of your fence, so they need to be set deep enough in the ground to ensure a sturdy foundation.
How do you set post for a pole barn?
The pole barn’s foundation is made up of posts. The building is supported by something other than concrete.
Should pole barn posts be set in concrete?
Set posts in concrete won’t prevent rot. The wood won’t be in contact with the ground, but the concrete pulls up the wood with it. It will happen over time.
How to make a post stay strong?
The best way to ensure your posts will stay sturdy and true for years is to install them at the correct depth and use a high quality concrete mix.
What is a post hole digger?
If you are planning on doing DIY we highly recommend a post hole digger or a rabbit hole digger which is essentially a single shovel that been designed to dig circular holes. The unique design enables the user to dig straight down to the ideal depth and keep the hole relatively narrow in diameter compared to a conventional shovel.
Can you use timber posts on concrete?
If using timber posts it is important to note that they must be set in either concrete or Postcrete on top of a minimum of 2 inch ballast/gravel. This is to allow drainage to take place between the post and the concrete. For the best results we recommend using rapid drying Postcrete. Always try to angle Postcrete slightly so it can shed water away.
Can you dig a fence post hole?
We strongly recommend before you start digging your fence post hole that you either check for any mains electrics or contact your utility company to mark any underground cables or hazards. Doing this also allows for you to reassess the fence line, layout and any positioning issues to make sure everything is exactly where you require it.
How deep should a hole be in concrete?
4" deep, 2 1/2 dia. is fine. Hole should be cored at least 1 1/4" from edge of concrete. Thickness and psi of concrete should been spec out to accommodate.
How thick is concrete?
Keep in mind most concrete is a nominal (that means it can be more or less, mostly less) 4" thickness. Once you're past the thickness of the concrete you're spitting into the wind.
How deep should a post be?
And that the post has been cut to length. (As a general rule, you want up to 1/3 of the post length to be below ground level. I make mine at least 20″ deep.)
How to check for plumb on a post?
Position the post upright, and check it for plumb. I like to use a post level to do this. (This L-shaped tool has three spirit gauges. You just rubber band it to the post, and check the two bubbles that indicate plumb.)
How much quikrete to use for post holes?
I use 50 lb bags of quikrete or sakrete for my post holes. These smaller bags are much easier to maneuver than their 80 lb cousins! Cut a gash in the top, then dump the rocky powder straight into the hole. Again, be sure your post hasn’t moved!
Can railing posts move?
This type of post also holds mailboxes and fences. If you secure them well, they won’t move for years!
Do railing posts shrink?
Generally, these railing posts are at least partially anchored in concrete. Unfortunately, the posts shrink as they dry. When that happens, they are smaller than the concrete hole that surrounds them. To make things worse, they experience a lot of leverage from people leaning on them. These effects only worsens as both concrete and post continue to degrade over time.
