- Slide the POWER LOCK into the POWER OFF (unlocked) position. Insert any additional station modules into the appropriate output slots.
- Once all modules are in place, slide the POWER LOCK into the POWER ON (locked) position to energize and secure the modules into the controller.
- The Pro-C will automatically recognize the correct number of stations. ...
Full Answer
How do I add additional stations to my Pro-C controller?
Insert any additional station modules into the appropriate output slots. Once all modules are in place, slide the POWER LOCK into the POWER ON (locked) position to energize and secure the modules into the controller. The Pro-C will automatically recognize the correct number of stations.
How do I connect my Hunter Pro-C controller to my power module?
Connect one wire to the SEN terminal and one to the other SEN terminal on the power module. 16 Connecting an SRR or ICR Remote Control (Not Included) The Pro-C controller is shipped with a SmartPort®wiring harness, allowing for fast and easy use of Hunter remote controls.
How do I program my station to run automatically?
Turn the dial to the RUN position to run the station (only the designated station will water, then controller will return to auto- matic mode with no change in the previ- ously set program). Manually Run All Stations 1. Turn the dial to MANUAL-ALL STATIONS. 2. You can select program A, B, or C by pressing the button. PROGRAMMING (continued)
How do I program The station number?
Hold down the button for 2 seconds. 2. This feature automatically defaults to program A. You can select program B, or C by pressing the button. 3. The station number will be flashing. Press the or button to scroll through the stations and use the and buttons to adjust the station run times.
How do I add more stations to Hunter Pro C?
Pro-C - Installing Station ModulesSlide the POWER LOCK into the POWER OFF (unlocked) position. ... Once all modules are in place, slide the POWER LOCK into the POWER ON (locked) position to energize and secure the modules into the controller.The Pro-C will automatically recognize the correct number of stations.
How do I run multiple programs on Hunter Pro C?
Turn the dial to the START TIMES position. Press the “PRG” button. Look for the lower case “b” near the start time number. Press the RIGHT ARROW button until the display shows “1-b”....Turn the dial to the START TIMES position. ... Turn the dial to RUN TIMES. ... Turn the dial to the WATER DAYS position.
How do I program my Hunter Pro C?
0:5915:07Pro-C Basic Programming - YouTubeYouTubeStart of suggested clipEnd of suggested clipThe round PRG button will be used to change between programs a B or C. The first step in program inMoreThe round PRG button will be used to change between programs a B or C. The first step in program in any controller is to set the current date and time to do this turn the dial to the date. And time.
How many zones is Hunter Pro C?
4VideosBrandHunterComputer ProgramYesWarranty2 YearsSeriesPCZones412 more rows
How do you install a multi zone sprinkler system?
0:403:29How To Install the 2 Zone InGround Sprinkler System - YouTubeYouTubeStart of suggested clipEnd of suggested clipAnd then connect the blue lock adapter to the timer. The blue lock tubing can now be connected toMoreAnd then connect the blue lock adapter to the timer. The blue lock tubing can now be connected to the timer. Repeat this step for the second zone. Cut the pipe where T's elbows.
How do you run all zones at once?
0:251:07Hydrawise - Run All or Multiple Zones - YouTubeYouTubeStart of suggested clipEnd of suggested clipTop option is run all zones. Hit that now you can either just hit run now and that's how youMoreTop option is run all zones. Hit that now you can either just hit run now and that's how you manually run the entire system from start to finish or. Blue means you're watering. White.
How do I reset my Hunter Pro C?
0:040:36Pro-C Irrigation Controller Advanced: 08, Resetting Memory - YouTubeYouTubeStart of suggested clipEnd of suggested clipThe back of the face pack you will find the reset. Button press and hold the program. And while youMoreThe back of the face pack you will find the reset. Button press and hold the program. And while you are still holding it press the reset button for a couple of seconds.
How long should you water your lawn?
It is ideal to water lawns about one inch of water per week. To determine how long you need to water to get one inch, place a plastic container in your yard and set a timer. On average, it will take 30 minutes to get a half inch of water. So, 20 minutes, three times per week will give a lawn about an inch of water.
How do I test my Hunter Pro C sprinkler system?
To initiate the test program:Press and hold the PRG button. The station number will be flashing.Press the or button to scroll to the station you would like the test program to start with. Use the and buttons to set a run time of up to 15 minutes. ... After a 2 second pause, the test program will begin.
How do you set zones on a Hunter sprinkler system?
1:326:56Hunter X-Core Programming Overview and Setting Up Program AYouTubeStart of suggested clipEnd of suggested clipUse the right arrow to advance to the next option. Remember we're still in the current time and dayMoreUse the right arrow to advance to the next option. Remember we're still in the current time and day the next option is a.m. p.m.. You can go plus 2:00 p.m.. Plus 2 24-hour mode.
What is interval on Hunter Pro C?
The interval can be set from 1-31 days between watering. When you change from a 1 day interval to a 2 day interval, you will see the days left number of the right of the display. To change the days left in the interval press the right arrow button once.
Is there an app for Hunter sprinkler system?
Control your Hunter irrigation system(s) remotely using this app or using a web browser from anywhere in the world (note: internet access required). This app requires a valid account at http://hydrawise.com. An account is free.
Can Hunter Pro C run all stations at once?
Hunter controllers allow you to start a station or an entire program manually. To do so, turn the dial to Manual Single Station or Manual All Stations, verify that the stations that you want to activate have run time, and turn the dial back to the Run position.
How do I turn off programs in Hunter Pro C?
Eliminating a Program Start Time With the dial set to the START TIMES position, push the and buttons until you reach 12:00 AM (Midnight). From this position push the button once to reach the “OFF” position. The “OFF” position is between 11:45 PM and 12:00 AM.
Why are two sprinkler zones on at same time?
Water is coming out of multiple zones at the same time: For the valves to stay open in one zone, while shutting outlets in other zones, there needs to be a minimum amount of water pushed through the valve. For instance, our 4,000 series require 10 gallons per minute (GPM) to operate and our 6,000 series require 15 GPM.
Why does my hunter sprinkler system run twice?
A common reason for a controller to repeat a cycle is too many programmed start times. Only one start time per active program is required, a second start time will cycle the program an additional time.
How does Pro C work?
For contractors and homeowners alike, the Pro-C provides step by step programming. No complicated entry functions or repetitive keystrokes. Just turn the dial to the section of the program that needs to be changed and use the plus, minus and next buttons to make the adjustments. No other programming method is easier.
What is a Pro C?
The Pro-C is equipped with electronic components called MOVs (Metal-Oxide the weather changes, without reprogramming the entire controller. A unique bar graph (thermometer display)in the large LCD display lets the programmer know at a glance what percent from the original settings the controller is operating the station run times. The ability to immediately view the recalcu-Varistor). These MOVs are designed to shunt lated run times for each of the zones electrical surges away from microcircuits is another unique feature built into the through the controllerʼs grounding circuit. seasonal adjustment.The Pro-C uses these MOVs to protect the controller from minorpower surges coming in through the primary(110/230VAC) input side and also the secondary output side(24VAC).
How long is a rain delay on a controller?
Programmable 0-7 Day Rain Delay No need to return to the controller to turn it back on
What transformer is used for Pro C?
Pro-C models can be supplied with a 115VAC/60 Hz transformer for domestic use or a 230VAC/50 Hz transformer for interna-tional use. This versatile transformer selection enables users to install the Pro-C anywhere in the world.
How long does a water station run?
Each station will operate up to six hours of run time in any or all three programs. Run times from 0-120 minutes program in one-minute increments and then in ten-minute increments up to six hours. The factory default for all stations is set at 0 minutes to eliminate any unneeded stations before programming. Note: Using the water budget feature, station run times may only be increased to a maximum of 6 hours.
Is the Pro C remote ready?
The Pro-C is remote ready! A SmartPort®
Does the Pro C have a battery?
The Pro-C has what every user of electronic controllers has wished for: the ability to keep all programs in memory without a backup battery. In the event of a power failure or if AC power is suspended from the controller by the user, the Pro-Cʼs non-volatile memory will maintain programs forever, without need for a battery. Normal watering will resume when AC power is restored.
