How to Add Coolant: Ford F-350 Super Duty (2008-2016) King Ranch 6.7L V8 Turbo Diesel
- 1. Getting Started - Prepare for the repair
- 2. Open the Hood - How to pop the hood and prop it open
- 3. Find Reservoir - Locate the coolant reservoir and clean it
- 4. Check Level - Determine the coolant level
- 5. Add Coolant - Determine coolant type and add fluid properly
- 6. Replace Cap - Secure the coolant reservoir cap
Full Answer
How to flush the coolant in a Ford F350 Super Duty?
Coolant Flush How-to: Ford F-350 Super Duty (2008-2016) 1. Getting Started - Prepare for the repair. 2. Overview - How to determine cooling system type. 3. Open the Hood - How to pop the hood and prop it open. 4. Find Reservoir - Locate the coolant reservoir and clean it.
What type of coolant do I Need?
You will need an Orange coolant such as the Motorcraft or DEXCool or any of the other Orange ELC coolants. Meets or exceeds the requirements of WSS-M97B44-D, GMW 3420 (superseded GM 6277M) and ASTM D 3306... If any of the above specs are on the jug, it will be ok with no concerns.
How to check the coolant level?
you have to buy the test strips to check the coolant. You can get these from the dealer or online. Kept checking my and still getting message. Stopped by dealer and found that it is pre-programmed to do that. Go into info center and re-set it.
What is the purpose of checking Engine coolant?
The purpose of checking is to verify the correct engine coolant concentration (freeze point protection) and corrosion inhibitor additive level (strength) of the coolant for maximum engine performance and protection. Additive to boost the corrosion inhibitor level based upon the test results of the Antifreeze Coolant ELC Contamination Kit.
Where do I put coolant in my f350?
0:071:22How to Check and Fill Coolant 08-19 Ford F-350 - YouTubeYouTubeStart of suggested clipEnd of suggested clipIf you check it cold it should be at the cold level that will be first thing in the morning if you'MoreIf you check it cold it should be at the cold level that will be first thing in the morning if you've been driving it don't open the cap leave the cap on. And it should be at the high level it rises.
How do you add coolant to a diesel truck?
Loosen the reservoir cap just a little, then step back while the pressure releases. Then, remove the cap completely. If the coolant level is low, add the correct coolant to the reservoir (not the radiator itself). You can use diluted coolant by itself, or a 50/50 mixture of concentrated coolant and distilled water.
Why does my f350 says check coolant additive?
The Check Coolant Additive Light comes on every 600 hours to remind you to check the coolant levels. While this does not indicate a problem, it does mean you should bring your Super Duty in to a certified Ford Service Center for a Coolant Check. DO NOT just add more coolant to the system!
What kind of coolant does a Ford f350 take?
ZEREX - G05® 50/50 Ready-to-Use Antifreeze / Coolant, 1 Gallon (Part No. ZXG05RU1) ZEREX G05® is the automaker approved original chemistry used in newer Ford®, Chrysler® and Mercedes-Benz® automotive and diesel engines.
What are the signs of low coolant?
Low coolant can sometimes cause a head gasket on your engine block to blow. If this happens, you may notice smoke emitting from the engine or tailpipe, a loss of power, engine knocking sounds, or decreased efficiency.
Can I top up coolant myself?
To top up your engine's coolant, you can simply open the reservoir cap (be careful the engine is not too hot and use a cloth wrapped around the cap to open it, as there could be some residual pressure left in the system) and add to the fluid level – what you use to do this is very important though.
What coolant can I use in my 6.7 Powerstroke?
The 6.7L Power Stroke diesel engine has both a cooling system and a radiator, with its own belt-driven coolant pump, thermostats and degas bottle. The only coolant to use is Motorcraft® Specialty Orange mixed with distilled water.
How do you fix low coolant level?
0:001:00Adding COOLANT, top off COOLANT, FIX LOW COOLANT ... - YouTubeYouTubeStart of suggested clipEnd of suggested clipIt open the cooling system only when everything is nice and cool. Use our funnel or carefully addMoreIt open the cooling system only when everything is nice and cool. Use our funnel or carefully add coolant. And bring the level up to the max mark. On your reservoir.
How long does coolant additive last?
For passenger car/light-truck owners, Passenger Car & Light Truck Antifreeze & Coolant eliminates additive drop-out, scaling and other issues inherent to conventional “green” coolants. It's pre-mixed 50/50 with high-quality water and lasts up to 150,000 miles or 5 years.
What color coolant does Ford use?
Motorcraft Green The Motorcraft Premium coolant is a fluorescent green IAT coolant that used silicates as corrosion inhibitors for Ford's cast-iron engine blocks.
What coolant does Ford recommend?
Motorcraft Yellow AntifreezeIt's called Motorcraft Yellow Antifreeze/Coolant. This next-generation antifreeze/coolant, which is designed for select 2018–2019 Ford vehicles, has the following advantages: Immediate corrosion protection.
How much antifreeze does a 6.7 Powerstroke hold?
Capacities and Specifications - 6.7L DieselItemCapacityEngine coolant (secondary cooling system)15.1 qt (14.3 L)1Engine coolant additive (secondary cooling system)16.0 fl oz (473 ml)2Diesel Exhaust Fluid (DEF)8 gal (30.2 L)Fuel tank (Dual)(Left side)61 gal (230.9 L) (Usable capacity)326 more rows
Do diesel engines take coolant?
The coolant in diesel engines needs to be replaced every 2 years (or 30,000 miles), while the coolant in gas engines needs to be replaced only every five years.
What is the best antifreeze for diesel engines?
Zerex G-05 Antifreeze/Coolant Rated one of the best for diesel, is the Zerex G-0. Commonly used in newer fords, Chryslers, and Mercs this hybrid will protect your engine for about five years/ 150,000 miles for lighter duty vehicles and three years/ 300,000 miles for heavy-duty ones.
Can you add water to diesel coolant?
The short answer is no, you can't mix tap water with engine coolant. Distilled water can work, but it is not ideal.
How do you put coolant in a box truck?
0:091:19How to Check and Add Coolant - YouTubeYouTubeStart of suggested clipEnd of suggested clipFollow the hose that comes from the top of the radiator cap it will lead you to the coolantMoreFollow the hose that comes from the top of the radiator cap it will lead you to the coolant reservoir it is usually a clear plastic tank with full and low indicators on the outside.