Apply Surflan AS as a directed spray to the soil surface or over the top of plants. Use only a properly calibrated, low-pressure, herbicide sprayer that will apply the spray uniformly. Use screens no finer than 50 mesh in nozzles and in-line strainers.
Full Answer
How much water to use for broadleaf?
Is Surflan in short supply?
Oryzalin Herbicide - Pro & Label | DoMyOwn.com
Protect your home from the most common perimeter pests; Customized program based on your location and home size; Get Additional Members-Only Savings; From $9.98/month + Free Shipping
When to apply Surflan Pro?
You should apply pre-emergents now in the fall, and then again in the spring typically. For optimum times in your area to apply a pre-emergent, you should contact your local county extension office .
How much water to use for Surflan Pro?
Surflan Pro Herbicide application you will need to use 3 fl oz of product per 1-2 gallons of water for 1,000 sq ft. The water in this case is just a carrier and you need to use enough water to make sure you get even coverage and to make sure you are getting the correct amount of product over the 1,000 sq ft area. There are directions on page 7 of the Surflan Pro product label that explains how to properly calibrate your sprayer.
How long do you have to use Surflan Pro?
You should use the Surflan Pro Herbicide within 3 years of the date of purchase.
Does Surflan Pro stain rocks?
Surflan Pro may cause a slight stain. If you start to notice a slight discolor, rinsing the rocks with water should remove it.
Does Surflan Pro hurt grass?
If it is applied to a moss lawn, it will prevent new weeds, including new moss, from emerging. It will not hurt moss that has already germinated.
When to apply surflan?
BEST ANSWER: Yes, Surflan, can be applied in the Spring and the Fall months for the best control of weed germination all year. https://www.solutionsstores.com/lawn-and-turf. You can find calendar schedule for pre-emergent application times.
What is surflan herbicide?
Surflan Herbicide is a high-quality, cost-efficient, pre-emergent herbicide. Locally produced and EPA approved and effectively controls more than 100 different weeds and grasses in gardens, ornamentals, lawns, and landscaping areas. Product Name. Price. Qty.
How to use a hand pump sprayer?
Step 1: Fill a hand-pump sprayer 3/4th of the way with water and then mix at a rate of 1.5 - 3 oz per 1000 sq ft. 2 1/2 gallons. Fill the sprayer the rest of the way with water and agitate the sprayer until mixed.
Does Surflan herbicide work?
Since the product is a pre-emergent, it needs to be applied before the problem weed emerges, especially if it's been a reoccurring problem. If the weed is already growing, Surflan Herbicide will not work (unless on select weed types) and you will have to use a post-emergent herbicide .
Is Surflan gone?
BEST ANSWER: It has been replaced by another product. Surflan as is gone
Can you use surflan to control grassburs?
BEST ANSWER: Yes, Surflan and other pre-emergents are really the best and most agreed upon control method for grassburs.
Does Surflan affect pecans?
I use it in March after the snow melt and it inhibits weed growth through July. Surflan will not effect your weeds but will prevent ungerminated pecan nuts from sprouting.
How to apply Surflan 2G?
Apply Surflan XL 2G using a drop or rotary-type spreader designed to apply granular herbicides or insecticides. Calibrate application equipment prior to use according to manufacturer’s directions. Check frequently to be sure equipment is working properly and distributing granules uniformly. Do not use spreaders that apply material in narrow concentrated bands. Avoid skips or overlaps as poor weed control or crop injury may occur. More uniform application may be achieved by spreading half of the required amount of product over the area and then applying the remaining half in swaths at right angles to the first.
What is the active ingredient in Surflan?
The active ingredients oryzalin (Surflan) and benefin (Balan) combine to give you superior pre-emergent control. Use Surflan XL 2G herbicide on labeled use sites before the weeds begin to germinate or immediatelf following cultivation for best results.
What is Surflan XL 2G?
Surflan XL 2G herbicide is a pre-emergent that controls or suppresses 35 different broad-leaf weeds and 21 different annual grasses and is labeled to be used on more than 250 different shrubs, trees, bulbs, perrenials, and turf. The active ingredients oryzalin (Surflan) and benefin (Balan) combine to give you superior pre-emergent control. Use Surflan XL 2G herbicide on labeled use sites before the weeds begin to germinate or immediatelf following cultivation for best results.
Can you fertilize after Surflan?
Yes, according to the manufacturer, you may apply a fertilizer immediately before or after applying Surflan XL 2G.
Is Surflan good for crabgrass?
I wont make that mistake again. HIGHLY RECOMMEND for northeast crabgrass.
How much water to use for broadleaf?
Use as a directed spray where possible to avoid injury to growing points. Apply 1 ⁄ 2 inch of water to activate. May be shallowly cultivated (1 to 2 inches). May be tank mixed with other herbicides for improved broadleaf control following label directions.
Is Surflan in short supply?
Supplies of Surflan are limited. I cannot independently confirm the following but this is what I was told by a distributor. "The manufacturing facility was damaged and the active ingredient (oryzalin) is in very short supply. It is unclear oryzalin will be discontinued."
