- First, lay paving slabs or lawn that will sit underneath the ground leading up to your deck.
- You can then look to fix both of your stringers to your deck frame. These should be fixed using galvanised decking nails. ...
- Next, fit the riser boards, again using galvanised decking screws.
- Finally, screw the decking treads to the stringer, using two nails at each end. Ensure the treads are firmly attached as loose treads can pose a safety risk.
- Sit back & admire your hard work!
How much does it cost to build a 10x15 deck?
To put the numbers and factors into focus, here are sample cost estimates for common porch sizes. Costs are based on our Average Contractor Cost range of $6 to $10 per square foot. 100 square feet (e.g., 10×10 or about 8×12): $600 – $900. 150 square feet (e.g., 10×15 or about 8×18): $900 – $1,350.
How much would it cost to build a 12x24 deck?
Storage prices in Monroe tend to be somewhat volatile when compared to other cities. Prices can vary by about $ 97.66 monthly depending on the time of year. Monroe self-storage prices are highest in November, and lowest in January. The boating lifestyle can provide hours of leisure and recreation each summer.
How to design your own deck like a pro?
- Your deck should complement its environment, which includes its location in your landscape, its connection to your home and the natural elements that surround it.
- Decide how large your deck should be. ...
- If you don’t think you have enough room in any one area, make that area larger or find ways to make spaces do double duty. ...
What is the easiest deck to build?
- Place gravel at the bottom of each footing to minimize sliding.
- Use a long level on top of your joist beams to ensure your deck is perfectly flat.
- Also, don’t re-bury those deck piers until you have them all laid in your backyard, just in case you need to change a few.
Can I build a deck directly on the ground?
Yes, you can build a deck directly on the ground, but with some conditions. A deck on the ground must be built with ground-contact wood, and the substructure needs to be adapted for minimal height. Even though technically a ground level deck is elevated up to 24”, here we will discuss decks built less than 8” high.
Can you deck on soil?
If the spirit level indicates the ground is uneven, level it out with extra soil or compact the soil to flatten it out. Now here are your two options for laying your decking. You can either build it directly on the ground or square the site and build it on top of risers as a floating deck.
Can I build a deck myself?
Building your own deck is a great way of transforming an outdoor area into a space perfect for entertaining. Believe it or not, it is not as hard as it seems – you can even do it yourself. All you need is timber supply, some materials and the right tools for the job.
What is the cheapest way to build a deck?
Pressure-treated wood is generally the cheapest material to build decks from. For up-front savings, that seems great, but don't forget long-term costs. Wood decks require yearly maintenance such as staining or painting, and they'll often break down quite quickly if you fall behind on maintenance.
What do you lay under decking?
A layer of crushed gravel, with or without plastic or weed barrier cloth, is the best choice for using under a deck. It sheds moisture instead of absorbing it, keeps the area under the deck drier, and won't decay.
How do you build a deck for dummies?
0:1014:56How to Build an 8 x10 Deck for Beginners - YouTubeYouTubeStart of suggested clipEnd of suggested clipWe start by digging the holes 10 inches to 12 inches round and diameter to 42 inches to 48 inchesMoreWe start by digging the holes 10 inches to 12 inches round and diameter to 42 inches to 48 inches deep depending on the frost level in your area is how deep you dig the holes.
Can you buy a kit to build a deck?
Our Pre-Cut Deck Kits are maintenance-free, affordable, and easy to assemble with pre-cut materials. We deliver your deck kit to your home with all the parts you will need. Once you pick your deck, we'll set you up with an assembly plan (DIY, Full-Install, or Partial Install).
How hard is a DIY deck?
In general, building a deck is fairly straightforward — you make a basic frame using standard beams and top it off with some kind of deck material. In reality, it ranges from simple to complex. A properly constructed deck requires some knowledge of woodworking, concrete, landscaping and engineering.
Is it cheaper to build a deck yourself?
According to Remodeling magazine's 2021 Cost vs. Value report, on average, a homeowner can recoup around 63% of the cost of a composite deck or almost 66% of the cost of a wood deck. Why? Because home buyers are willing to pay top dollar to own a deck.
How do you make a homemade deck?
Step 1: Create Your Deck Plan! ... Step 2: Place the Deck Footings. ... Step 3: Cut and Lay Your Joists. ... Step 4: Re-Bury Those Deck Piers. ... Step 5: Prep Your Deck Wood. ... Step 6: Waterproof the Bottom of Your Deck Planks. ... Step 7: Lay Your Decking Planks. ... Step 8: Add End-Caps.More items...
How do you build a floating deck over grass?
InstructionsPrepare the Deck Area. Clear the ground where the deck will be installed, removing grass and all other organic material, as needed. ... Set the Concrete Blocks. ... Build the Outer Frame. ... Position and Square the Deck Frame. ... Check the Blocks. ... Install the Remaining Joists. ... Install the Deck Boards.
What is a floating deck?
A floating deck is a deck that isn't attached to a building and they “float” above the ground. Generally, floating decks are low to the ground and don't require handrails or even staircases. They are sometimes called “grade-level” or “freestanding” decks because they're built just above the ground level, or grade.
Planning for a New Deck
Check with your local building department and homeowner's association regarding permits and building requirements. Note what elements of the project require inspection and plan your work accordingly.
Decking Materials
Pressure-treated lumber (top right) is the standard material to withstand weather. Most pressure-treated lumber is wet when delivered directly from the store, so you’ll need to let it dry before staining — typically for six months. As an alternative, consider upgrading the decking and railings with composite materials (bottom right).
Marking the Deck Layout
When you have a solid plan, you can mark the layout with strings and batter boards made from 2-foot furring strips and screws. See Making and Using Batter Boards assembly instructions.
Working With Pressure-Treated Lumber
Use fasteners and hardware labeled for treated lumber — stainless-steel or hot-dipped, galvanized screws.
Next Steps
The next stage of the project includes setting the posts and building the framing. See How to Build a Deck: Post Holes and Framing.
What are some examples of decking?
Our example is of decking that is: 1 Laid on flat, soft and level ground 2 Laid on the ground floor, not raised 3 Not joined to a building 4 Without any extra touches like a balustrade or decking lights 5 Designed with the boards in a horizontal pattern
How to cut a wide piece of wood?
If cutting a wide or thick piece of timber, clamp a straight-edge along the marked line to provide a straight, accurate cut all the way through the timber. Step 2: If using a jigsaw. Clamp the deck board, face side up, in a workbench and slowly cut along the line.
Can you lay concrete pads on soft ground?
There are two options when building on soft ground: add concrete pads for extra stability. or lay straight onto the ground for a simple project. We recommend adding concrete pads as they're not only great for stabilising your deck; they'll ensure your decking lasts longer.
Can you burn off wood decking?
Don't burn the off-cuts of pre-treated timber decking as the smoke and ash produced is toxic. Dispose of them as you would ordinary household waste. You might need. The following list of tools and materials includes everything you will need to lay a basic, ground-level deck.
How much does it cost to build a ground level deck?
Depending on the size and materials used, a ground level deck can cost upwards of $4,000. Some of the most expensive components for a deck are railings and stairs. Since a ground level deck does not require safety railings or stairs to access, the cost to build one is comparatively lower than building an elevated deck in terms ...
What is a ground level deck?
Ground level decks (also called a floating deck or a platform deck) are decks that are close to the ground. When decks are less than 30” above grade, they’re usually easier to build for three reasons. They don’t require ladders or railings (less risk of injury)
Where to attach angle brackets to a deck?
Once your beams are level, attach angle brackets at the corners of the deck where joists and beams meet. These will add additional support at the corners of your ground level deck. Once again, use your string level to assess the evenness of your terrain and deck.
Can you put a deck on top of gravel?
You can also place your structure on top of gravel for better drainage. Next, you’ll put stakes in the ground and string the perimeter using the stakes and hang a line level. Once you know your deck outline is level, you’re ready to move to the next step.
Can a platform deck get wet?
Sustained dampness is the enemy of a ground level deck since it will lead to mold, rot and decay. Make sure you build your deck high enough for ventilation so the ground can dry out. That way, your deck will last longer. Generally, if a deck is less than 12 inches above the ground, the perimeter of the deck must be open for free air to flow beneath the deck.
What is the best way to squeeze more space onto your deck or patio?
A tiered vegetable or herb garden is the best way to squeeze more space onto your deck or patio. The step by step tutorial is available at Decor and the Dog.
How to make a potting soil planter?
First, make a 2 inches layer for drainage by adding gravel or small rocks in the bottom, then add potting soil and plant your favorite herbs. Create an opening in mason jar lids for plants to come out (or else simply remove the lids). Attach the mason jars to the shutter/board using hose clamps.
Why do you need a container for a vegetable garden?
Even if you do have yard space for a garden, vegetable garden containers can help overcome some common gardening problems like fusarium or verticillium wilt, nematodes, poorly draining soil, or pests like gophers. Additionally, the soil in a container warms more quickly in the spring, allowing you to plant tomatoes or peppers way ahead of schedule.
What vegetables can be grown in a container?
If you are seriously limited on space, there are a few “space saving” vegetables to try as a vegetable garden container: beets. scallions. carrots. lettuce. peppers. tomatoes. With the right staking or caging, many veggies, like the beans or snow peas, can easily be grown in a container, and even corn will do well in a pot.
How to keep insects out of vegetable garden?
Use an insecticidal soap or horticultural oil to combat insects. Make sure not to allow the pots to dry out and provide a trellis or other support for climbing veggies. Sit back, watch, and wait to reap the bounties of a container or other raised bed vegetable garden on your deck. Printer Friendly Version.
How to keep terra cotta plants from watering?
Choose large pots and deep window boxes to ensure proper space for roots and cut down on watering. Although terra cotta pots are festive, use plastic or composition materials to aid in water retention, especially if hand watering. Drip irrigation on an automatic timer is a beautiful thing.
Can you grow dwarf vegetables on a deck?
Deck Vegetable Garden Ideas. Almost any vegetable that can be grown in an outdoor garden plot may be grown in a container. There is no need to grow dwarf varieties, although these are fun too! Obviously, depending upon your climate, some veggies grow better than others; for instance, peppers and tomatoes do fabulously well in ...
Can you plant herbs on a deck?
Companion planting is another great deck vegetable garden idea. Combining growing herbs with vegetables will not only be useful but, in many cases, will act as pest deterrents as well as surrounding the larger veggie containers or raised vegeta ble garden on deck with smaller punches of color in the form of flowering annuals.
Considerations and Planning Your Deck
This guide will cover how to build a ground-level deck that does not require stairs and a stair railing. In many areas, a ground-level deck is defined as one that has a maximum height of 30 inches above the ground and is not attached to the house.
Dig Holes for Posts
Depending upon your area and local building codes, some decks may only require ground-level footings. In most instances, decks require support from concrete piers that are set into the ground. The terms “piers” and “footings” are often used interchangeably though they are technically not the same thing.
Pour Concrete and Place Post Anchors
Mix ready-mix concrete bags in a wheelbarrow per the manufacturer’s instructions using a shovel or mortar hoe.
Attach Posts or Beams to Post Base
Your deck plans likely call for posts to be set on each post base to be bolted to the deck framing later. In some cases, your deck plans may call for a beam to be set directly in the post bases.
Attach Rim Joists and Angle Brackets
With the posts or beams in place, it’s time to build the deck frame. Because the deck is free-standing, it does not require a ledger board, which gets attached to the house. Instead, your deck will consist of rim joists that make up the deck’s perimeter, to be filled in with joists that will support the decking.
Install Boards and Add Fasteners to Joists
If your deck will be free-standing against the house, you’ll want your wood decking boards to run parallel to the house. If your deck will be out in the yard, then you’ll need to make the decking run parallel to the deck framing itself.
What is decking for a garden?
Decking is a great way to add some functional space to your garden. Whether you want to create an alfresco extension to your home, or add a surround to a Jacuzzi or pool, here’s how to lay decking on grass and how to build a raised deck.
How much gap do you need for a timber board?
Timber boards need a 5mm to 8mm gap along the length of boards, and a 3mm along the ends of the boards. So if you’re laying two boards end-to-end, you need to leave a 3mm gap. Then the final step is to calculate the number of boards required. Multiply the coverage of a single board by 1.1 to factor in wastage.
How far should screws be from the end of a board?
You need to use two screws on either side of the board to secure it to every joist it crosses. Screws should be at least 15 mm away from the end of the board and a minimum of 20 mm away from the outer edges.
Is decking an extension of home?
Decking can give you some extra outdoor space for entertaining and can even act as an extension of your home. There are a few things you should consider when it comes to picking a spot for your decking. Decking is much easier to lay on a level surface.
Do you have to remove trees to lay a deck?
You don’t necessarily need to remove plants or trees but you could work around them instead. Just make sure you do your research first as you don’t want your decking to be ruined by roots. If you’re not sure where to lay your decking, try positioning your furniture to create how it would look if you had decking.
Can you lay a deck on the ground?
Now here are your two options for laying your decking. You can either build it directly on the ground or square the site and build it on top of risers as a floating deck. If you lay it directly on the ground, you may find that it’s more susceptible to absorbing moisture and might need additional maintenance.
Is it easier to lay a deck or a raised deck?
Laying decking is an easier job than you might have first thought. The more planning you do and the more you understand the steps, the easier the job will be. There are several ways you can lay decking but we’re going to talk you through building a raised deck and how to lay decking on grass.
