- Step One: Turn off the Water
- Step Two: Access the Lid Lock Switch
- Step Three: Bypassing the Lid Lock with a Magnet
- Step Four: Perform Test Wash
How to bypass lid lock on washing machine?
If you’re unsuccessful with the magnet method, you can bypass your washer’s lid lock function by cutting the wires connected to the lid lock switch itself. Make sure that your washing machine is turned off, the water supply is disconnected, and you’ve gained access to the lid lock switch. Then, proceed with the following steps:
How do you fix a washing machine that won't turn off?
Put the lid back down and plug the washing machine back into the electrical outlet. Turn on the appliance and lift the lid. If the appliance keeps running, the magnet is in the proper location. If the appliance turns off, you'll have to lift the lid again and reposition the magnet.
How do you open a washing machine with a magnet?
Consider taping the magnet in place to be able to open and close your washing machine during regular use. Quick Tip: If the small magnet is not creating a solid link with the solenoid, make sure that you’re placing it in the exact spot where the lid lock switch hovers. Otherwise, you may need a stronger magnet.
How to bypass a lock on a front door?
If you still want to bypass the door lock, read on for a couple of different ways. Try the Magnetic Fix First The easiest way to fix this problem is with a magnet. All you need for this job is a small thin magnet like a refrigerator magnet, a flathead and Philips head screwdriver, and some duct tape.
Can you bypass washing machine lock?
One of the main ways of bypassing a washing machine door lock is by disabling the safety circuit. It is good to note that the process involves cutting of electrical wires. Thus, you need to disconnect your machine from the main power supply. Additional, cutting the cord may void your warranty.
Is it safe to bypass washer lid switch?
11 Answers. Do I recommend it? NO. The lid lock it to prevent injury to the people near the washer, as without it stopping the machine, the agitator will turn with the lid open.
How do you bypass a magnetic lid switch?
0:261:51How to Bypass Magnetic Lid Switch on GE Washer - YouTubeYouTubeStart of suggested clipEnd of suggested clipHere. That's actually that's actually a pretty strong magnet. So you yank it. Off oops you set itMoreHere. That's actually that's actually a pretty strong magnet. So you yank it. Off oops you set it right on top. And then you can watch the washer do its final spin or whatever. While the lid is open.
Can you bypass the door lock on LG washing machine?
To do so, power on the machine, press the spin speed button until No Spin is selected. And then start the cycle. This will activate the drain only function on your LG front load washer. Once the water has drained pause or stop the cycle and the door will unlock.
How do I bypass the lid switch on a Whirlpool washer?
0:522:02See how to bypass the lid switch in a Whirlpool washer - YouTubeYouTubeStart of suggested clipEnd of suggested clipThis is a noir style lid switch disconnect the wire harness from the lid switch. Place the jumperMoreThis is a noir style lid switch disconnect the wire harness from the lid switch. Place the jumper wire between the gray and white wires. And put electrical tape on it to insulate the connection.
How do you bypass the lid lock on a Whirlpool washing machine?
1:186:01Whirlpool Washer Manual Parts Tests and Lid Lock Bypass for ... - YouTubeYouTubeStart of suggested clipEnd of suggested clipTurn the dial clockwise three clicks until the spin and done lights are illuminated. Then press theMoreTurn the dial clockwise three clicks until the spin and done lights are illuminated. Then press the start. Button this will turn all the lights off and you are now in the manual.
How do you bypass the lid switch on a top load washer?
1:303:32Washing machine quick lid switch bypass. - YouTubeYouTubeStart of suggested clipEnd of suggested clipBut simply all we're going to do is take these two wires connect. Them with the wire net. And weMoreBut simply all we're going to do is take these two wires connect. Them with the wire net. And we should be back in business now there are two things to this one is that the washer will always want run
How do you test a lid switch on a magnetic washing machine?
Press the lid switch button down to test the continuity of the switch. If the multimeter shows 0 ohms of resistance, the switch is properly functioning. However, if the multimeter does not move significantly, the switch is not properly functioning and must be replaced.
How do you bypass a GE washing machine door lock?
0:062:37See how to bypass the lid switch for testing purposes in a GE washerYouTubeStart of suggested clipEnd of suggested clipTo open the controls panel you will need to remove these four screws on top of the controls. Panel.MoreTo open the controls panel you will need to remove these four screws on top of the controls. Panel. After removing the screws flip the controls panel forward like this.
How do you fix a washing machine door sensor?
3:597:43Washing machine will not spin, door switch replacement - YouTubeYouTubeStart of suggested clipEnd of suggested clipIt first thing you get the door switch out is to take those two Phillips screws loose. Second thingMoreIt first thing you get the door switch out is to take those two Phillips screws loose. Second thing you get the door switch out is push this tab in on both sides and push the connector.
How do I take the lock off my washing machine?
Turning off the machine at the mains should allow the door lock to cool down, and after a few minutes, you'll be able to open the washing machine door. The interlocks can take some time to release at the end of the cycle, so be patient. The most common cause is water left in the machine. Try running a spin/drain cycle.
How do you force a washing machine door open?
Simply pull the wire or line sideways, gently but firmly, towards the handle to release the door catch and open the door. If this hasn't worked or your washing machine handle faces the opposite way you can still release the door catch.
What is the function of a lid switch on a washing machine?
The lid switch on your washer is essentially a safety mechanism. It is what allows the washer to start when the lid is closed, and what is responsible for stopping the appliance when the lid is abruptly opened.
How much does it cost to replace a lid switch on a washer?
Washer Lid Switch Repair Cost Repairing the lid switch costs $140 to $190. In some instances, this repair might only take 15 to 20 minutes so your bill might swing towards the lower number.
How do you bypass the lid lock on a Kenmore washing machine?
1:163:07Bypass your Kenmore Washer Lid Lock Switch in no time! - YouTubeYouTubeStart of suggested clipEnd of suggested clipSo you take your blue and your white wire. And you just strip them and splice them together. And putMoreSo you take your blue and your white wire. And you just strip them and splice them together. And put them on one lead of the switch. And then you take the red wire and you put it on the other.
How do I bypass the lid switch on a Maytag washer?
1:324:13How to bypass the lid lock on a Maytag or Whirlpool washerYouTubeStart of suggested clipEnd of suggested clipYou slip it right over the top right there. And that's all you need to do.MoreYou slip it right over the top right there. And that's all you need to do.
How to bypass a washing machine door lock?
One of the main ways of bypassing a washing machine door lock is by disabling the safety circuit. It is good to note that the process involves cutting of electrical wires. Thus, you need to disconnect your machine from the main power supply. Additional, cutting the cord may void your warranty.
Why does my washing machine door jam?
If your washing machine door developed problems while in use, give it time. Some doors are designed to jam when the machine becomes too hot beyond a certain point. The door resets itself back to normal when it cools down. The best way to quicken this process is by turning off the power supply.
Can you bypass a washer door lock?
You cannot bypass your washing machine door lock if you do not know the problem. Once the problem is identified, you can move to the next step. While recognising the problem, be as keen as possible to avoid confusion. If you make a mistake in identifying the problem, the step you will use to bypass the door lock will be different, thus complicating the issue.
Can you bypass a security lock?
Never do it for fun because you may be endangering your life. For instance, you can bypass the security lock if somebody changed your password and you cannot reset. At times you may be forced to bypass the security door if you lost your password and the reset code.
Can you add videos to your watch history?
Videos you watch may be added to the TV's watch history and influence TV recommendations. To avoid this, cancel and sign in to YouTube on your computer.
How to bypass lid lock on washer?
If you’re unsuccessful with the magnet method, you can bypass your washer’s lid lock function by cutting the wires connected to the lid lock switch itself. Make sure that your washing machine is turned off, the water supply is disconnected, and you’ve gained access to the lid lock switch. Then, proceed with the following steps:
How to open and close a Whirlpool washer?
Place a small magnet between the lid lock switch and where it fits into the unit. This action should release the switch, allowing you to raise your Whirlpool washer’s lid. Consider taping the magnet in place to be able to open and close your washing machine during regular use.
Why is the lid lock on my washing machine important?
The speed of a washing machine’s spin cycle is incredibly fast and can most certainly cause broken bones. This fact is why it is absolutely critical to have a lid lock function on your washing machine. This feature is especially useful for households with children.
How to bypass lid lock on Whirlpool washing machine?
The first step in bypassing the lid lock function on a washing machine, the Whirlpool brand included, is to turn off the washing machine and disconnect it from the power source. Do not proceed until you’ve confirmed that the appliance is completely unplugged from the socket.
What does the lid lock do on a washing machine?
Not to be confused with the lid switch feature, which prevents the washing machine from operating when the lid opens, the lid lock does exactly as it sounds. It locks the washer’s lid into place during cycles. The lid lock function primarily exists as a safety function and can come in handy.
Why do washing machines have lid locks?
Put simply, the lock is what prevents the lid from being opened during certain cycles of washing including the load sensing cycle and the spin cycle.
How many wires are needed for a washer lid lock?
Most washer’s lid lock switches are powered by three or four wires. These are the ones you’ll be cutting. Cut the wires that relate to the lid switch and lid lock component. Using sharp scissors or a pair of pliers, snip right through the center of each corresponding wire.
What is a lid lock switch?
This switch is connected to a solenoid that completes a circuit, allowing the machine to run only if the top is down. However, some washing machines come with a lid lock. This switch performs the same function, but the lid must be locked in place for the machine to wash. A simple bypass for the first type of lid switch is to simply jam a piece of wood into the switch, causing it to activate the solenoid. However, lid lock switches are generally magnetic and must be bypassed differently.
What is bypassing a lid lock switch?
A simple bypass for the first type of lid switch is to simply jam a piece of wood into the switch, causing it to activate the solenoid. However, lid lock switches are generally magnetic and must be bypassed differently. Advertisement.
Where is the lid lock switch on a washer?
Look for the lid lock switch on the underside of the top panel and where it fits into the appliance. Place a magnet between the two so there is a magnetic connection between the lid lock and the solenoid inside the washer.
Who is Owen Richason?
Owen Richason grew up working in his family's small contracting business. He later became an outplacement consultant, then a retail business consultant. Richason is a former personal finance and business writer for "Tampa Bay Business and Financier." He now writes for various publications, websites and blogs.
How many wires are in a washer lid lock switch?
Scan the included wiring diagram until you find the wires labelled “lid switch” and “lock switch.” The majority of washing machine lid lock switches are powered by 3 or 4 wires, each of which performs a different function. Hopefully, these will be color-coded. If not, the tech sheet will map out the arrangement of the wires on the control board.
How does a lid lock work?
The lid lock technology on many older washing machines works by using a strong magnetic charge to keep the lid shut during the wash cycle.
How to fix a washer that is still stopping?
Adjust the placement of the magnet if your washer is still stopping. Assuming the appliance continues to behave the way it normally does, you may have no choice but to open it back up and give it another shot. Try to line up your magnet with the exact spot on the top panel where the lid lock switch usually hovers. If that doesn’t take care of things, hunt around for a stronger magnet.
How to remove lid lock switch?
Remove the lid lock switch assembly. Use a 1⁄4 inch (0.64 cm) nut driver to loosen the two mounting screws holding the box in place on the bottom of the panel. Lower the assembly carefully and let it dangle freely from its wire harness at around chest level. That way, you’ll have no difficulty accessing it with your tools.
What happens if you tinker with a washer without unplugging it?
If you decide to tinker with your washer without first unplugging it, you could be putting yourself at risk of electrical shock.
Where is the lid lock switch on a washer?
Identify the lid lock switch on the underside of the top panel. This is the electronic mechanism that actually controls the washer’s locking function. On most models, it will be housed in a small box made of gray or black plastic. Chances are, this little widget is responsible for the issue you’re experiencing.
How to shut off water in laundry room?
Shut off the water by turning the twin supply valves counterclockwise. These valves will either be located in a recessed nook on the wall behind the unit or under the utility sink, if your laundry room has one. When you find them, grip the rotating dials and twist them all the way to the left until you can’t move them anymore. This will guarantee that there’s no water flowing to the machine.
How Do You Bypass A Washing Machine Door Lock?
Cutting The Electrical Connection
- If it is not your magnet that is the problem, you are going to have to do the wire splicing fix. This is a bit more difficult but still pretty easy. You will need a quarter-inch nut driver, a set of screwdrivers, wire cutters or sharp scissors, wire strippers, and a wire connector or electrical tape.
Be Careful of The Agitator
- Now that you have the lid unlocked permanently, you will need to be careful when opening the lid during a wash cycle. With lid lock washing machines, they do not stop spinning when you open them after bypassing the lock mechanism. Do not let your jewelry, clothing, hair, or hands get too close to the agitator. It is best to keep children away from the machine at all times.