To replace the battery, remove the top cover by inserting a coin into the slot located on the bottom right corner and twist. Remove the screw at the center of
What is digital security control?
How to remove keypad from mounting bracket?
How to test a siren?
Who is Nicole Fotheringham?
See 1 more
About this website
How do I change the battery in my digital security?
0:151:19Remove the battery from the panel. Box place the new battery on the shelf. And attach the leads toMoreRemove the battery from the panel. Box place the new battery on the shelf. And attach the leads to the new battery red to red and black to black close the cover and lock it using the key or screw.
How do you change the battery in a DSC key fob?
0:532:38Using the small Phillips head screwdriver remove the screw in the center of the circuit. Board. YouMoreUsing the small Phillips head screwdriver remove the screw in the center of the circuit. Board. You can stick it on the magnet. So it doesn't get lost remove the circuit board from the casing.
How do I change my ADT DSC battery?
0:101:45And so all you need to do is unplug that and then this you'll want to unscrew this screw right here.MoreAnd so all you need to do is unplug that and then this you'll want to unscrew this screw right here. And then lift this up. And then you'll be able to pull the old battery out.
How do you remove the battery from a power pole remote?
IMPORTANT: Make sure battery replacement is done in a dry location. STEP 1: Remove Key Fob Cover using a Flat-Tip screwdriver. FIG 1 STEP 2: Remove Switch Membrane and Circuit Board from the base FIG 2 STEP 3: Remove battery from holder and replace with a CR2032 3v Lithium Coin Battery. STEP 4: Reassemble Key Fob.
Where is battery in DSC security system?
0:151:11The way to put your batteries. And put the keypad back on your base basically all you have to do isMoreThe way to put your batteries. And put the keypad back on your base basically all you have to do is line up the tabs with the inserts on the base. Give a little push. Down.
Can I change the battery in my key fob myself?
Key Fob Battery Replacement Automakers make it reasonably easy to swap in a new battery, though you may need to use a small screwdriver to pry the key fob open. Generally, these batteries cost $10 or less, though some fobs require two batteries.
How do you remove ADT keypad cover?
0:135:51It there are these secret tabs on the bottom though where you can stick a flathead screw. And youMoreIt there are these secret tabs on the bottom though where you can stick a flathead screw. And you push in the tab. And pop it off.
How do I stop my DSC alarm from beeping Low battery?
If it displays “low battery” and you have recently experienced a power outage, simply wait 24-hours after the power comes back on for the battery to recharge. If the beeping keeps on beeping and beeping, however, you'll probably have to replace the battery.
What happens when ADT battery dies?
Yes. Once your backup battery has run out, your security system won't be able to function without another power source. If you want to ensure that your house alarm does not automatically go off in a power outage, you should let the alarm company know precisely what you need for your unit.
How do you open the batteries in a remote?
0:020:59Simply turn the remote upside down and you should see an arrow all of the back is a removable coverMoreSimply turn the remote upside down and you should see an arrow all of the back is a removable cover simply push it on the arrow direction.
How do you open a stuck remote battery cover?
0:001:16So then I put a knife through here slowly to make sure you take a butter knife. So you don't cutMoreSo then I put a knife through here slowly to make sure you take a butter knife. So you don't cut yourself. And just do price limp it softly. And then once you're here. You just pull it off like that.
How do you remove a battery from a controller?
1:145:02Use the pry tool as well. There is a ribbon cable holding these two parts together so be careful notMoreUse the pry tool as well. There is a ribbon cable holding these two parts together so be careful not to over stretch it and rip up the ribbon cable there's the cable.
How do I stop my DSC alarm from beeping Low battery?
If it displays “low battery” and you have recently experienced a power outage, simply wait 24-hours after the power comes back on for the battery to recharge. If the beeping keeps on beeping and beeping, however, you'll probably have to replace the battery.
How do I change the battery in my DSC PC1555?
How to Replace the Battery in Your DSC PC1555 Home Security...Buying a replacement battery.Locate the control panel box.Installing Replacement Battery.Put your system on test.Locate and open the control panel box.Examine the old battery for damage.Disconnect the battery.Installing the new battery.More items...•
How do I get my DSC keyboard to stop beeping?
0:021:04So what you'll do to silence the trouble beep you'll acknowledge the trouble first. So you'll doMoreSo what you'll do to silence the trouble beep you'll acknowledge the trouble first. So you'll do start - and as you can say it says view trouble service required hit star.
How do I reset my DSC alarm after replacing the battery?
To reset the detectors, press and hold the Reset key for two seconds or press *72.
What is the weight of the DSC WS4939?
The DSC WS4939 has a weight of - g.
A battery in my Remote Controller has started to corrode. Is the device still safe to use?
The product can still be used safely after proper cleaning. Remove the battery with gloves and clean the battery compartment with a toothbrush and...
Is the manual of the DSC WS4939 available in English?
Yes, the manual of the DSC WS4939 is available in English .
DSC - User Manuals
PowerSeries Pro - HSM2955 2-Way Audio Verification Module - Installation Manual - En-Fr-Es-Pt - R003
Need help?
Do you have a question about the DSC WS4939 or do you need help? Ask your question here. Provide a clear and comprehensive description of the issue and your question. The more detail you provide for your issue and question, the easier it will be for other DSC WS4939 owners to properly answer your question.
About the DSC WS4939
View the manual for the DSC WS4939 here, for free. This manual comes under the category Remote Controllers and has been rated by 1 people with an average of a 7.5. This manual is available in the following languages: English, Spanish, French, Dutch, Swedish. Do you have a question about the DSC WS4939 or do you need help? Ask your question here
Frequently Asked Questions
Below, you will find the most frequently asked questions about the DSC WS4939.
What is digital security control?
Digital Security Controls is a company that manufactures and distributes state-of-the-art security systems in 140 countries. DSC makes a number of home and business security systems that include keypads and sirens. Batteries in both these components must be changed every two years. Sirens do not sound if the battery power is low. Indicator lights on the keypad provide a warning when batteries are due for replacement.
How to remove keypad from mounting bracket?
Remove the keypad from the mounting bracket by sliding it up and out. Some models require that you remove screws. Remove the screws from the panel, and store in a safe place.
How to test a siren?
Test the siren by pressing and holding the test-siren button for five seconds; it is located on the front of the siren. If the siren sounds, the battery change was successful.
Who is Nicole Fotheringham?
Nicole Fotheringham. Nicole Fotheringham has been a writer since 1997. She was born in South Africa and began as a reporter for the "Natal Mercury" and "Cape Argus" newspapers. Fotheringham has a master's degree in English literature from the University of KwaZulu-Natal.
How long do batteries last?
Under normal conditions the batteries can last up to 2 years. If
What to do if batteries are swallowed?
dren. If Batteries are swallowed, promptly see a doctor. Do not try to recharge these batter-
How to change the switch on a syringe?
ply remove the cover and slide the switch to the ON position (to the left).
How long does it take to activate a syringe?
To activate, press and hold the button for approximately 2 seconds.
Why is the SIM button deactivated?
To conserve battery power the button comes deactivated. To activate sim-
Can a receiver disable zone?
for this zone can be disabled on the receiver.
What is digital security control?
Digital Security Controls is a company that manufactures and distributes state-of-the-art security systems in 140 countries. DSC makes a number of home and business security systems that include keypads and sirens. Batteries in both these components must be changed every two years. Sirens do not sound if the battery power is low. Indicator lights on the keypad provide a warning when batteries are due for replacement.
How to remove keypad from mounting bracket?
Remove the keypad from the mounting bracket by sliding it up and out. Some models require that you remove screws. Remove the screws from the panel, and store in a safe place.
How to test a siren?
Test the siren by pressing and holding the test-siren button for five seconds; it is located on the front of the siren. If the siren sounds, the battery change was successful.
Who is Nicole Fotheringham?
Nicole Fotheringham. Nicole Fotheringham has been a writer since 1997. She was born in South Africa and began as a reporter for the "Natal Mercury" and "Cape Argus" newspapers. Fotheringham has a master's degree in English literature from the University of KwaZulu-Natal.