Once you have located it, follow these simple steps:
- Remove the cap by gently pressing down on one end and then pulling it off.
- Insert one end of the battery into the light bulb until it clicks into place (head facing up).
- Slightly press down on both ends of the battery so that air can escape from inside. The battery is now firmly seated.
Full Answer
How to put batteries in a Dorcy flashlight?
When it comes to putting batteries in a DORCY flashlight, there are a few things you need to keep in mind. Here are 10 tips that will help you get the job done: Make sure the batteries are fully charged before you start. Remove the battery cover by gently pressing down on one end and then pulling it off.
Why is my Dorcy flashlight not turning on?
If you suspect your DORCY flashlight may not be turning on because of a faulty battery, check to see if the battery is properly seated in the light bulb. Next, test the switches by pressing both at once. If neither of these solutions works, it may be necessary to take your flashlight apart and replace the internal components.
What should I do if my Dorcy light is not working?
What should I do? Replacement batteries and bulbs are available online at www.dorcy.com Most spotlights contain lead acid batteries and must be cared for properly and charged frequently. Dorcy will replace a defective lead acid battery within one year of purchase.
What kind of batteries do Dorcy spotlights use?
Most spotlights contain lead acid batteries and must be cared for properly and charged frequently. Dorcy will replace a defective lead acid battery within one year of purchase. Proof of purchase in the form of a retail/online receipt is required, or you may return the actual battery.
How do you change the batteries in a dorcy lantern?
A: The bottom of the lantern is black with bumps on the plastic. Rotate/turn the black bottom in a counter-clockwise direction (as you would open a pickle or mayo jar) to access the battery compartment. Helpful?
How do you put a 6 volt battery in a dorcy flashlight?
How to Install a Six Volt Battery in a FlashlightRemove the cover protecting the lens of the 6V flashlight. ... Unscrew the head that holds the lens. ... Flip the flashlight upside down to remove the old battery. ... Replace the new battery inside the tube with the "+" end of the battery facing up.More items...
How do I change the battery in my LED flashlight?
0:001:34Replacing LED flashlight batteries - YouTubeYouTubeStart of suggested clipEnd of suggested clipAnd the plus side. And then the negative side. And negative side that's where the spring. Is that'sMoreAnd the plus side. And then the negative side. And negative side that's where the spring. Is that's how that goes you just press it in and then release the battery.
How do you charge a dorcy flashlight?
Battery Information: 3.7V/3600mAh rechargeable Li-ion battery. In order to charge the lantern insert the micro USB (included) into the battery cartridge that says 5V IN. Then insert the USB cord into any USB charging device. A red LED light will start blinking to indicate that the battery is being charged.
How do you turn off the dorcy flashlight?
On and off button: Lighting by pressing on/off rubber button on the end of 41-0093, by turning it on, and turn it off as well.
How do you put a 6 volt battery in a dolphin torch?
0:391:266 Volt Lamp Battery - YouTubeYouTubeStart of suggested clipEnd of suggested clipWe just see here it's pretty straightforward you just drop it in like this push it all the way downMoreWe just see here it's pretty straightforward you just drop it in like this push it all the way down and push the lamp. In. You know it's the largest.
How do you insert batteries?
Slide the battery into place with the negative end first. By installing the negative end first, the battery will slide into the compartment more easily. You should then be able to easily snap the positive end into place. The positive end of the battery should snap into place with a gentle push.
How do you change battery?
0:492:19How to Change a Car Battery | DIY Car Repairs | The Home DepotYouTubeStart of suggested clipEnd of suggested clipThen detach the cable and set it aside away from the battery. Next loosen the nut on the positiveMoreThen detach the cable and set it aside away from the battery. Next loosen the nut on the positive end and detach the cable. Go ahead and remove any clamps or brackets securing the battery.
How do you install LR44 button batteries?
Locate the battery compartment door on the back of the lantern. Loosen the screw with a Phillips screwdriver. Remove the exhausted batteries and dispose of them properly. Insert three, new button cell (LR44) alkaline batteries.
Why is my rechargeable flashlight not charging?
Check the USB port to ensure that no dirt or grime is preventing the flashlight from charging. Try out a new battery in the flashlight to see if this fixes the problem. Try out a new charging cord or adapter to see if either of the ones you used are faulty.
How do you charge a flashlight battery?
1:162:29How to Charge a Tactical Flashlight - YouTubeYouTubeStart of suggested clipEnd of suggested clipIn your left hand hold the flashlight while taking the charging cable in your right hand andMoreIn your left hand hold the flashlight while taking the charging cable in your right hand and plugging it in be very careful to only use your left hand for the flashlight.
Where are dorcy flashlights made?
Central OhioCEO Tom Beckett's company makes a variety of products, from flashlights to LED spotlights to outdoor lanterns.
How do you put batteries in a big flashlight?
0:311:18HOW TO PUT BATTERIES IN A FLASHLIGHT OR OTHER DEVICEYouTubeStart of suggested clipEnd of suggested clipYou can get the light in there there's a little spring down there at the bottom. So where the springMoreYou can get the light in there there's a little spring down there at the bottom. So where the spring goes is generally. Where the flat edge goes so you want to put that down in there.
How do you put a battery in a Rayovac flashlight?
2:316:29Rayovac 6 Volt LED Lantern - YouTubeYouTubeStart of suggested clipEnd of suggested clipHere. So and the battery here we're just gonna see it doesn't matter how this goes. In must be aMoreHere. So and the battery here we're just gonna see it doesn't matter how this goes. In must be a certain way that it. Goes. Okay so the positive. Here is gonna be on the top side this top post.
What uses a 6v battery?
As a widely known type of lantern battery, 6-volt cells are used to supply electricity to torch lights, flashlights or any other illumination that needs higher energy capacity. Since these are rechargeable batteries that are comprised of multiple arrays of cells inside, they have a large capacity for energy storage.
How do you put batteries in a Rayovac lantern?
0:231:34How to Use Your Rayovac Super Bright LED Lantern - YouTubeYouTubeStart of suggested clipEnd of suggested clipSo to put the batteries. And you twist this off at the bottom here. And then we have our threeMoreSo to put the batteries. And you twist this off at the bottom here. And then we have our three rayovac D batteries here that we'll put. In.