How to Replace the Blades on a Toro TimeCutter Zero Turn
- Step 1: Park your mower on a flat surface.
- Step 2: Apply parking brakes.
- Step 3: Disengage blade control switch.
- Step 4: Turn off engine and remove the key.
- Step 5: Remove the deck- See how to remove the deck here!
- Step 6: Flip mower deck over and place it on a piece of scrap wood to keep it level.
- Step 7: ...
- Step 8: ...
How do you sharpen a Toro timecutter blade?
Prior to sharpening, make sure to review safety information in the operator's manual . To repair small dents in a Toro TimeCutter blade, safely remove the blade from the mower deck and secure the center of the blade, as shown. A two grade sharp file can be used to sharpen the cutting edge.
What is a sharp blade on a Toro mower?
Sharp lawn mower blades provide a clean cut and reduce grass shredding for a professional, high quality cut. You will need to remove the mower deck in order to loosen the blade bolts and remove them for service. See the Toro how-to video on removing a mower deck for more information.
How do you fix a dent in a Toro timecutter blade?
To repair small dents in a Toro TimeCutter blade, safely remove the blade from the mower deck and secure the center of the blade, as shown. A two grade sharp file can be used to sharpen the cutting edge.
How do I service my Toro zero-turn mower?
Check the blades for sharpness, wear or damage, and service or sharpen the blades as needed. Toro’s TimeCutter Zero-Turn mowers offer easy maintenance solutions, however, before servicing you should review the safety information and relevant instructions from the Toro operator’s manual.
When to replace Toro blades?from manuals.toro.com
Replace a blade if it hits a solid object, if the blade is out of balance, or if the blade is bent. For best performance and continued safety conformance of the machine, use genuine Toro replacement blades. Replacement blades made by other manufacturers may result in non-conformance with safety standards.
How much lower is the front of a lawn mower blade?from manuals.toro.com
Check the front-to-rear blade level any time you install the mower. If the front of the mower is more than 7.9 mm (5/16 inch) lower than the rear of the mower, adjust the blade level using the following procedure:
Why is my lawn mower tipping backwards?from manuals.toro.com
Tall grass can hide obstacles. Avoid sudden starts when mowing uphill because the mower may tip backward. Be aware that loss of traction may occur going downhill. Weight transfer to the front wheels may cause drive wheels to slip and cause loss of braking and steering.
What is a motion control lever?from manuals.toro.com
The motion-control levers are speed-sensitive controls of independent wheel motors. Moving a lever forward or backward turns the wheel on the same side forward or in reverse; the wheel speed is proportional to the amount you move the lever. Move the motion-control levers outward from the center to the PARK position when exiting the machine (Figure 14 ). Always position the motion-control levers into the PARK position when you stop the machine or leave it unattended.
What is blade control switch?from manuals.toro.com
This switch controls power to any attachments that draw power from the engine, including the mower deck and cutting blades.
What does the mark on a blade mean?from manuals.toro.com
This mark indicates that the blade is identified as a part from the original machine manufacturer.
How long does it take for a new mower to develop full power?from manuals.toro.com
New engines take time to develop full power. Mower decks and drive systems have higher friction when new, placing additional load on the engine. Allow 40 to 50 hours of break-in time for new machines to develop full power and best performance.
Why won't my Toro mower start?
If your Toro lawn mower won’t start, it may be the fuel. Lawn mowers aren’t meant to run on 10% or more ethanol fuel or even E85 fuel. Go to www.toro.com/fuelfacts for more information
Why is my lawn mower not starting?
Having trouble starting your lawn mower? It might be your spark plug.
When do Toro blades need to be replaced?
The blades must be replaced if a solid object is hit, if the blade is out of balance, or if the blade is bent. To ensure optimum performance and continued safety conformance of the machine, use genuine Toro replacement blades. Replacement blades made by other manufacturers may result in non-conformance with safety standards.
How long does it take to break in a new mower?
New engines take time to develop full power. Mower decks and drive systems have higher friction when new, placing additional load on the engine. Allow 40 to 50 hours of break-in time for new machines to develop full power and best performance.
What is a rotary blade lawn mower?
This machine is a ride-on, rotary-blade lawnmower intended to be used by homeowners in residential applications. It is primarily designed for cutting grass on well-maintained lawns. It is not designed for cutting brush, mowing grass and other growth alongside highways, or for agricultural uses.
Why wash the underside of a lawn mower?
Wash the underside of the mower after each use to prevent grass buildup for improved mulch action and clipping dispersal.
Why is my grass turning brown?
Maintain sharp blades throughout the cutting season, because sharp blades cut cleanly without tearing or shredding the grass blades. Tearing and shredding turns grass brown at the edges, which slows growth, and increases the chance of disease.
What is an engine owner's manual?
The enclosed Engine Owner's Manual is supplied for information regarding the US Environmental Protection Agency (EPA) and the California Emission Control Regulation of emission systems, maintenance, and warranty. Replacements may be ordered through the engine manufacturer.
When changing height of cut, should you adjust the height of the anti-scalp rollers?
Whenever you change the height-of-cut, it is recommended to adjust the height of the anti-scalp rollers.
How to repair dents in Toro Timecutter blade?
To repair small dents in a Toro TimeCutter blade, safely remove the blade from the mower deck and secure the center of the blade, as shown. A two grade sharp file can be used to sharpen the cutting edge. Note each side of the mower blade should be sharpened an equal amount to ensure optimal results.
What does it mean when your Toro lawn mower has dirt?
Excessive dirt and obvious wear may mean your air filter needs to be replaced; the owner's manual will list what kind of air filter to use in your Toro riding lawn mower.
How many spark plugs does a lawn mower have?
Note that single cylinder lawn mower engines have one spark plug, while twin-cylinder riding mower engines have two spark plugs.
How many spark plugs does a single cylinder lawn mower have?
Note that single cylinder lawn mower engines have one spark plug, while twin-cylinder riding mower engines have two spark plugs. You will need a deep well socket to remove the spark plug. Once removed, the spark plugs condition can tell you if the engine is operating properly and if the spark plug is working.
Is it important to review the safety information and recommended maintenance in the operator's manual prior to servicing your Toro?
It is important to review the safety information and recommended maintenance in the operator's manual prior to servicing your Toro lawn mower.
Do you need to remove mower deck?
You will need to remove the mower deck in order to loosen the blade bolts and remove them for service. Check the blades for sharpness, wear or damage, and service or sharpen the blades as needed.
Do Toro mowers have air filters?
Note that different models of Toro lawn mowers have different engines, but all Toro mowers use air filters that are easy to service. Be sure to review recommended maintenance schedules, safety info, and instructions in the operator and engine manuals before servicing your Toro air filter. Excessive dirt and obvious wear may mean your air filter ...
How to remove the cutting deck on a Toro?
Removing the Cutting Deck. 1. Engage the parking brake on your Toro mower. This helps secure the mower while you're removing the cutting deck. 2. Place the Blade Engage lever or knob in the "off" position. 3. Place the deck-lift lever in the bottom notch to lower it as far as it will go.
How to tighten hex nut on lawn mower?
Tighten the hex nut to between 70 and 90 foot-pounds using a torque wrench. Flip the deck back upright and replace it on your mower in the opposite manner in which you removed it.
How to remove cotter pin from stabilizer?
Locate and remove the cotter pin at the end of the stabilizer rod. Slide the stabilizer gently out of the bracket. Place the pin and stabilizer off to the side.
How to slide cutting deck out of tractor?
Slide the cutting deck out from under the tractor by sliding it from the right side.
What to wear when cutting a knife?
Put on heavy duty gloves to protect your hands from the blade.
Do Toro mower blades need to be replaced?
Lawnmowers greatly reduce the work involved in maintaining your lawn; they do, however, require maintenance and repairs from time to time. The blades work continuously through the mow season and can become dull. Routine sharpening can help keep your mower cutting, but eventually the blades must be replaced. Check the blades of your Toro 42-inch riding mower at the end of every mow season, or sooner if you begin to notice a change in the cut or mulching capabilities provided by your tractor.
