Grasp the bulb lightly but firmly, push upwards gently and turn anticlockwise until it is released from the socket.Keep gently twisting anticlockwise until the bulb comes loose from the socket. Replace the bulb. Insert a replacement bulb lightly but firmly into the socket.
How do you change a light bulb in a gas fireplace?
In order to remove the bulb rotate it in a counter-clockwise direction (using gloves or holding a paper towel) until the bulb comes free. Screw the replacement bulb into the fireplace in a clockwise direction until the bulb is secure.
How many light bulbs does a Dimplex electric fireplace use?
The Dimplex Electric Fireplace, model number DFB6016, uses a total of six light bulbs. The four lower light bulbs illuminate the "fire," while the two upper light bulbs provide light for the interior of the fireplace. Once the service panel is removed, you can replace either the upper or lower light bulbs.
Where is the bulb in an electric fireplace?
Where Is The Bulb In An Electric Fireplace? The bulb in an electric fireplace is typically located within the center of the unit. The access cover, typically located at the back of the unit, will need to be removed in order to reach the bulb.
How often should you change the light bulb in a fireplace?
These bulbs may only have a lifespan of a couple of years and so they may need to be changed a number of times throughout the lifespan of the fireplace. You can typically tell when the bulb isn’t working in an electric fireplace because the flame effects aren’t being displayed.
Where is the bulb located in electric fireplace?
Where Is The Bulb In An Electric Fireplace? The bulb in an electric fireplace is typically located within the center of the unit. The access cover, typically located at the back of the unit, will need to be removed in order to reach the bulb.
How do you fix the flame on a Dimplex electric fireplace?
0:452:19How To Fix An Electric Fireplace Flame Feature - YouTubeYouTubeStart of suggested clipEnd of suggested clipAnd when you're all done you put your cover back on screw it in put your back on screw it in plug itMoreAnd when you're all done you put your cover back on screw it in put your back on screw it in plug it in and try it.
How do I change the bulb in my electric heater?
1:313:25How to Change the Bulbs in an Electric Stove Heating Unit - YouTubeYouTubeStart of suggested clipEnd of suggested clipSo just reach your hand around carefully. And turn counterclockwise. And you have one of the boats.MoreSo just reach your hand around carefully. And turn counterclockwise. And you have one of the boats. Reach under and take out the other. We're going to install the new bulbs. These are 40 watt bulbs.
How do you remove the front screen of a fake fireplace?
0:211:20BurnBrite 88001 How to Remove the Front Glass Panel - YouTubeYouTubeStart of suggested clipEnd of suggested clipThere's one screw on the left hand side of the fireplace. And one screw on the right hand side ofMoreThere's one screw on the left hand side of the fireplace. And one screw on the right hand side of the fireplace. First we're going to remove the screw on the right hand side of the fireplace.
Why is the flame on my electric fireplace not working?
The circuit breaker might have tripped, causing the motor flame problem in your unit. The solution to this problem is as easy as flipping it back on. After checking the circuit breaker and fuse, move on to other parts of the electric fireplace. Check if there are any loose connections with the cables.
Why does my Dimplex fire light keep turning off?
Overheating. An electric fireplace will automatically shut off when it starts to overheat. This is to prevent to the unit from overheating causing damage to the fireplace itself, or becoming a fire hazard for your home.
How do you change a lightbulb?
0:241:47How to Change your household lightbulbs - YouTubeYouTubeStart of suggested clipEnd of suggested clipSo use a cloth to grasp it for removal in most houses bayonet mount bulbs are very common to removeMoreSo use a cloth to grasp it for removal in most houses bayonet mount bulbs are very common to remove one press up on it slightly and twist anti-clockwise. It should come out easily.
How do you open an electric fireplace?
All you need to do is find the front of your fireplace and then open it up by turning the handle that should be located on one side or another. You can then push forward with your hands or pull back if there's a latch on this side, to get it fully opened so you can see what's inside.
How do you clean a Dimplex electric fireplace?
Never use abrasive cleaners on any Dimplex product as it can cause damage to the interior and exterior of the product. Mantel surface cleaning: To remove dust, dirt, fingerprints, or other marks, wipe the exterior with a damp cloth. A mild detergent can also be used if required.
How do you remove an electric fireplace cover?
An electric fireplace insert can typically be fully removed by sliding it out from where it was placed through the front. Electric inserts will commonly have a front area that can be held and used to remove it, and have a larger back area that needs to be removed before the whole unit can be taken out.
Do electric fireplaces need maintenance?
In addition to being a decorative piece in your home and giving off heat in an energy-efficient manner, electric fireplaces require minimal cleaning. Unlike gas or wood fireplaces, no ventilation or gas lines are needed, making maintenance simple.
Do you have to clean an electric fireplace?
Electric fireplaces don't typically require regular cleaning, but any dust that has built up within the inlet or outlet to the heater should be removed as and when required to ensure that the fireplace is working as efficiently and safely as possible.