How to Change Tanning Bed Bulbs and Find Replacements
- #1 Unplug Your Tanning Bed The first step is to unplug your tanning bed. ...
- #2 Remove Acrylic Shields Secondly bulbs in sunbeds are protected by a plastic or acrylic shield. ...
- #3 Replace Bulbs During this step is important to be gentle because tanning bed bulbs are incredibly delicate and will smash if handled with force. ...
- #4 Re-insert Acrylic Shields ...
- #5 Plug in and Test ...
Where can I buy replacement parts for my ESB tanning bed?
ESBService.com offers the full line of ESB Tanning Bed replacement parts and replacement tanning lamp kits for your ESB brand tanning bed, ESB booth, or ESB stand-up tanning system.
How do I pay for a tanning bed?
*Easily pay with credit or debit via secure PayPal Server. *For Tanning Beds, Booths and Standup Tanning Systems Manufactured by ESB Enterprises, LLC. Why Purchase a New Tanning Bed From ESB Service?
Where can I buy replacement tanning lamps for my tanning bed?
We also have duo swirl tanning lamps and facial swirl lamps. ESBService.com has replacement acrylics, acrylic trim strips, lamp guards, lamp reflectors for your ESB brand tanning bed, booth, or stand-up tanning system.
How do you make acrylics last longer in a tanning bed?
Dull and dried out acrylics will cut down on the amount of UV light and decrease the amount of tanning power. Clean and well maintained acrylics maximize your tanning results and the efficiency of your tanning bed and will help the acrylics to last for years.
How do you remove acrylic from an ESB tanning bed?
2:037:02ESB Tanning Bed Bench Acrylic Removal and Re-InstallationYouTubeStart of suggested clipEnd of suggested clipAnd now it's free and we can start it we can simply pull the acrylic out the front. Now it's aMoreAnd now it's free and we can start it we can simply pull the acrylic out the front. Now it's a little cotton here so I'm going to push it that way. And that was 70 rupees right out the back.
How often do tanning bed bulbs need to be changed?
So how often should you replace your lamps? Most tanning salons replace all of their lamps once a year. If you have a home tanning bed, lamp replacement is more likely to be needed only every three to five years.
Do all tanning beds take the same bulbs?
Most tanning beds use F71 lamps. These are about 71 inches long and have two metal pins on each end. All SunQuest, SunVision, Virtual Sun, Alpha Sun, SunMaster (except a few 32 lamp models), Soleil, Supreme, Alisun, ProSun and similar beds use this size lamp.
What are the pink and blue bulbs in a tanning bed?
With current technology, tanning lamps appear light blue in their natural phosphor state; to create a warm or pink lamp, a small amount of strong red phosphor is added during fabrication. This changes the appearance of the lamp only when it is operating.
How do I know if my tanning bed needs new bulbs?
While they may continue to light up for that long, they will not retain the effectiveness they had at, say, 50 hours of use. Over time, it will take longer and longer to get the same tan. By 500 to 800 hours of use, most tanning bulbs have lost enough potency that they should be replaced.
How many bulbs are good in a tanning bed?
Most tanning beds designed for home use are equipped with 12, 16, 24 or 26 lamps, evenly divided between the canopy and bench. In general, increasing the number of lamps reduces tanning times. A bed with fewer lamps will still deliver the same great results, but it will take longer to get there.
What level tanning bed gives you the best tan?
Level 3 offers medium pressure lamps with lower UV rays and more UVA rays, providing a faster and deeper tan than Level 1 and Level 2. And finally Level 4 tanning beds (and up) feature ridiculously fast tanning times, with sometimes next to zero UVB rays, guaranteeing a dark tan with virtually no chance of a sunburn.
What are the pink bulbs in a tanning bed?
Pink Bronzer bulbs are for tanners who want a higher quality tan, instead of an orange color. Deep hues of bronze that will make your friends green with envy. The Pink Bronzer was designed to work famously in every tanning bed new or old, regardless of the number of bulbs.
Can I use Windex on my tanning bed?
Cleaning Products to Avoid Although ammonia-based cleaning products like Windex are pretty diverse regarding the various items they clean, acrylics are not one of those surfaces. When making a DIY tanning bed cleaner, you must be aware of the products that damage the acrylic.
Are ESB tanning beds good?
ESB Tanning Systems™ is a highly recognized and trusted brand when it comes to tanning products. Tanning Beds Direct carries a large selection of ESB™ tanning beds, and all of them - whether commercial or home tanning beds - are on sale at the best prices.
What does red light in tanning bed do?
Red Light Beds In fact, they don't emit any UV light at all. Red light therapy, also ironically known as red light tanning, uses LED light strips to emit a low wavelength LED red light. This is outside of the UV wavelength range and doesn't stimulate melanin production which is what creates that summer glow.
Why is my tanning bed not tanning me?
Your skin is always rejuvenating itself by shedding old top layer skin to expose new skin underneath. Dry skin sheds faster and takes your tan with it. Dry skin also reflects light rather than absorbing, which not only hinders your tanning process, but makes you look less tan than you are!
How often should a sunbed be Retubed?
Lamps/tubes are typically replaced after 600 hours and retubing will cost you around £500 – £1 per hour in lamp usage, so about 5% of your takings. This all sounds great but you need to also save some of your takings to eventually (after 3 years or so if you bought a completely new device) replace your sunbeds.
How often should a sunbed be serviced?
In order to keep your sunbeds in good working order we recommend that you perform a general service on your sunbeds every year. We also suggest that an in-depth check needs to be performed every 5-10 years depending on the age and the frequency of the use of the equipment.
Are bronzing bulbs better than regular bulbs?
Bronzing lamps (bronzing bulbs) will create a darker tan and last longer but the tan is achieved at a slower pace than with regular tanning lamps (tanning bulbs). To see results with bronzing lamps it is recommended to have a base tan before using bronzers.
What do you clean tanning bed bulbs with?
0:442:55ESB Tanning Bed Lamp (Tanning Bulb) Maintenance - YouTubeYouTubeStart of suggested clipEnd of suggested clipSo what I recommend that you do is with your ESB power clean take and spray a cloth. With the powerMoreSo what I recommend that you do is with your ESB power clean take and spray a cloth. With the power clean give a few sprays.
Do acrylic tanning beds last?
Dull and dried out acrylics will cut down on the amount of UV light and decrease the amount of tanning power. Clean and well maintained acrylics maximize your tanning results and the efficiency of your tanning bed and will help the acrylics to last for years.
Can we repair an ESB tanning booth?
We can help repair any ESB Tanning Bed or booth...Old or new!
Is power kleen good for tanning beds?
ESBService.com has Power Kleen Green Tanning Bed cleaner that is safe for tanning bed acrylics. Power Kleen Green does not contain ammonia or alcohol that can dry out and dull the acrylics in your tanning bed. Dull and dried out acrylics will cut down on the amount of UV light and decrease the amount of tanning power.
How many amps does a bed need to be on a circuit breaker?
A. The bed needs to be on a 20 Amp Circuit Breaker that is dedicated to the bed only.
Do you need to replace the ballast on a lamp?
A. You probably need to replace the ballast that drives those lamps.
What kind of light does a tanning bed use?
Most tanning beds use standard tanning bulbs. These bulbs produce 95% UVA light and 5% UVB light. By far, these are the most common and are designed to help you build a quick, solid tan.
What is a dual zone tanning bed?
For instance, the bulbs beaming down on your lower half to be a bit stronger than the ones positioned where your face is or the sides of your arms are. This is known as a “dual-zone setup.”
How long does a tanning bed last?
Considering that the average tanning session only lasts somewhere around 10 minutes, most home users will only have to replace the bulbs a couple of times over the tanning bed’s lifetime.
What type of bulb is used for tanning beds?
There are two main types of tanning bed bulb connections. These connections are Bi-Pin and RDC. Be sure to get the correct bulb for your bed, as you can’t easily convert Bi-Pin to RDC.
Why should the text on the bulbs be facing up?
The text on the bulbs should be facing up so you can see all of the necessary information such as wattage, bulb type, etc. Make sure to mark it all down before you go order some random bulbs that don’t fit.
