Replacing the drum unit
- Make sure that the machine is turned on.
- Open the front cover.
- Remove the toner cartridge and drum unit assembly from the machine.
- Push down the green lock lever and take the toner cartridge out of the drum unit.
- Unpack the new drum unit.
- Put the toner cartridge firmly into the new drum unit until you hear it lock into place. ...
- Make sure that the machine is turned on. ...
- Open the front cover. ...
- Take out the drum unit and toner cartridge assembly. ...
- Push down the green lock lever and take the toner cartridge out of the drum unit.
- Unpack the new drum unit.
- Put the toner cartridge firmly into the new drum unit until you hear it lock into place.
When does your printer drum need to be replaced?
You should replace it when your image quality declines and does not improve even after changing your toner. Or simply replace your drum when your printer notifies you to do so. When the replace drum light or message comes on, your printer might stop working without much notice.
Does printer need a new drum?
Your business' laser printer uses a toner cartridge and a drum unit to print out documents and photos. The toner cartridge contains colored or black powder that the drum unit transfers onto paper during printing. Over time, the drum unit deteriorates and eventually needs to be replaced.
How does a printer drum go bad?
What Are the Signs That a Printer Drum Needs to Be Replaced?
- Blurry Images. Blurry images and missing text are both classic signs of a failing toner drum. ...
- Lines. The printer drum might be faulty if you notice lines that appear consistently on each of your printed pages.
- Speckles and Spots. Spots on the paper can be caused by a number of things, including a faulty or leaking toner cartridge, or a bad printer drum.
Can I clean a printer drum?
You can use a clean, lint-free cloth instead, but a toner cloth is ideal. Wipe down the exterior of the drum to remove loose toner. Moisten a cotton ball with 99 percent pure isopropyl alcohol, and then use it to clean off any patches of toner that have adhered to the drum.
How many pages can a DR720 print?
Where to place toner cartridges?
What to do if toner scatters on clothes?
Does Brother use drum toner?
Can you use a non-brother drum in a printer?
See 2 more
About this website
What does it mean when your printer says change drum?
The message 'Replace Drum' will appear if the drum unit is at the end of its rated life. Brother strongly recommends that customers use only genuine Brother drum units and/or toner cartridges.
Is it worth replacing printer drum?
But the replacement of a drum unit is vital to laser printers' health. A degraded drum unit can cause streaks, smudges, and blank spots on your printed page even if you just inserted a new printer toner. While a broken drum unit won't break your printer, it will just fail to stop printing at a certain point.
How do I reset my printer after replacing drums?
0:161:57How to Reset the Brother DR-730 Drum Counter - YouTubeYouTubeStart of suggested clipEnd of suggested clipThen press ok to select drum. That's going to ask you if you want to reset the drum. You select theMoreThen press ok to select drum. That's going to ask you if you want to reset the drum. You select the down button it'll say accept it and now the drum counter is reset. And you can start printing.
Where is the drum on my printer?
A drum unit is a green metal cylinder or tube that carries a static electrical charge that attracts the toner powder from the toner cartridge and applies it to the paper as it passes through the printer. Therefore, you will always find that drum unit is located very close to or even attached to the toner cartridge.
How long should a printer drum last?
There are many factors that determine the actual drum life, such as the temperature, humidity, type of paper, type of toner used, number of pages per print job and so on. Under ideal conditions, the average drum life is estimated at approximately 12,000 pages.
Can you clean a printer drum?
DO NOT clean the surface of the drum with a sharp object or any liquids. Use only a cotton swab, or a dry lint-free cloth. We recommend placing the toner cartridge and drum unit assemblies on a clean, flat surface with disposable paper underneath it in case you accidentally spill or scatter toner.
How do you reset a drum?
Reset the Drum CounterClose the front cover.Make sure the machine is turned on.Press. (Settings). ... Press All Settings. (This step might be skipped in some models.)Choose Machine Info. or Machine Information => Parts Life.Press and hold Drum or Drum Life until the machine's display message changes.Press Yes.Press.
Do I really need to replace the drum on my Brother printer?
The Brother machine will display a 'Replace Drum' or 'Drum Stop' message when the machine has printed approximately 15,000 pages. The drums should be replaced as a set in order to maintain print quality. Unlike the toner cartridges, the drum change is not automatically detected by the machine when they are replaced.
Why does my Brother printer keep saying drum error?
Drum Error typically appears when the corona wire on the drum unit needs to be cleaned or when the drum unit needs to be replaced.
How do I change the drum on my HP printer?
0:271:52Replacing the Imaging Drum | HP LaserJet Printers | HP - YouTubeYouTubeStart of suggested clipEnd of suggested clipHold the middle handle of the imaging drum and pull it along the tracks to remove it with the tonerMoreHold the middle handle of the imaging drum and pull it along the tracks to remove it with the toner cartridge remove the new imaging drum and toner cartridge from the protective bag.
Is the drum and toner the same thing?
What's the difference between a drum unit and toner cartridge? The toner cartridge is the container that holds the toner powder. The drum unit is an electrically charged cylinder that fuses that toner powder onto paper to create text and images. Both of these components are essential for producing a print.
How do I clean the drum on my HP printer?
For cleaning, HP recommends using HP Equipment Cleaning Wipes, but you can use an HP-approved lint-free wipe and deionized or distilled water. Note: If dark spots appear on back side of prints, clean drum screen. Note: If minilab prints more than 2000 prints each day, clean drum screen up to twice daily.
Do I really need to replace the drum on my Brother printer?
The Brother machine will display a 'Replace Drum' or 'Drum Stop' message when the machine has printed approximately 15,000 pages. The drums should be replaced as a set in order to maintain print quality. Unlike the toner cartridges, the drum change is not automatically detected by the machine when they are replaced.
When should I replace my laser printer drum?
Separate drum units last quite a bit longer than a toner cartridge and typically should be replaced after the use of 3-4 toners. Your printer should inform you when it's time to replace the drum, but you can usually tell your drum is on it's last legs if you start to see black spots or lines across the page.
Can a laser printer drum be cleaned?
Use an activated toner cloth, stretched tautly, and carefully wipe down the drum exterior to remove loose toner. Then use a cotton ball saturated with 99% pure isopropyl (rubbing) alcohol. Clean any patches of stubborn toner still attached to the drum. Use toner cloth or lint-free microfiber to clean the print rollers.
How do I know when my printer needs to be replaced?
7 Signs That Your Printer Needs to Be Replaced1- Slow Printing. ... 2- Your Printer is Literally Stuck in the Past. ... 3- Ink Cartridges are Hard to Come By. ... 4- Printer Warranty Has Expired. ... 5- Poor Print Quality. ... 6- Exceeding Printer Duty Cycle. ... 7- Certain Printers Aren't Made to Last.
How many pages can a DR720 print?
A new DR720 drum unit can print approximately 30,000 A4 or Letter size single-sided pages at 1 per/job .
Where to place toner cartridges?
We recommend that you place the drum unit and toner cartridge assembly on a piece of paper in case you accidentally spill or scatter toner.
What to do if toner scatters on clothes?
If toner scatters on your hands or clothes, immediately wash it off with cold water. - DO NOT put a toner cartridge or a toner cartridge and drum unit into a fire. It could explode, resulting in injuries.
Does Brother use drum toner?
Brother strongly recommends that customers use only genuine Brother drum units and/or toner cartridges. Each Brother laser printer is designed to work at pre-set temperatures that are matched exactly to each of our individual toner formulations. Each individual component is designed to work with the other to ensure quality and reliability. Using non-Brother supplies may affect the hardware performance, print quality, and machine reliability. The Brother limited warranty does not apply to any problem that is caused by the use of third party drum units, toner cartridges, or toner.
Can you use a non-brother drum in a printer?
The printer should be used only in a clean, dust-free environment with adequate ventilation. - Printing with a non-Brother drum unit may reduce not only the print quality but also the quality and life of the machine itself. Warranty coverage does not apply to problems caused by the use of a non-Brother drum unit.
How to get drum unit back into machine?
Using the green handle, push the drum unit back into the machine until it locks in place.
How to unlock a drum unit?
Hold the green handles of the drum unit when you carry it. DO NOT hold the sides of the drum unit. Unpack the new drum unit. Remove the protective cover. Hold the handle of the toner cartridge and gently push it away from you to unlock it. Pull it up and out of the drum unit.
Does Brother printer have toner cartridges?
The Brother machine has separate consumables the toner cartridge and the drum unit. Verify you replace only the drum unit and not the toner cartridge. If you want to know their difference, refer to "What is the difference between the toner cartridge and the drum unit?"
How many pages can a DR720 print?
A new DR720 drum unit can print approximately 30,000 A4 or Letter size single-sided pages at 1 per/job .
Where to place toner cartridges?
We recommend that you place the drum unit and toner cartridge assembly on a piece of paper in case you accidentally spill or scatter toner.
What to do if toner scatters on clothes?
If toner scatters on your hands or clothes, immediately wash it off with cold water. - DO NOT put a toner cartridge or a toner cartridge and drum unit into a fire. It could explode, resulting in injuries.
Does Brother use drum toner?
Brother strongly recommends that customers use only genuine Brother drum units and/or toner cartridges. Each Brother laser printer is designed to work at pre-set temperatures that are matched exactly to each of our individual toner formulations. Each individual component is designed to work with the other to ensure quality and reliability. Using non-Brother supplies may affect the hardware performance, print quality, and machine reliability. The Brother limited warranty does not apply to any problem that is caused by the use of third party drum units, toner cartridges, or toner.
Can you use a non-brother drum in a printer?
The printer should be used only in a clean, dust-free environment with adequate ventilation. - Printing with a non-Brother drum unit may reduce not only the print quality but also the quality and life of the machine itself. Warranty coverage does not apply to problems caused by the use of a non-Brother drum unit.
