How to Choose a Vessel Sink
- Consider the Plumbing The first thing to consider is the plumbing, but more specifically the faucet. ...
- Decide if you want an above or recessed mount. There are two main types of installation types for Vessel Sinks: Undermount vs Recessed (also known as drop in). ...
- Choose the right size. There’s no standard size for a bath sink. ...
- Choose a Finish or Material. Perhaps the biggest differentiators among bath sinks are the materials used to make them. ...
Where should a faucet be placed in a bathroom vanity?
Since vessel sink faucets can be placed anywhere around the perimeter of the vessel sink, you need to think carefully about where to position the faucet relative to the sink and in the space of your vanity. You should place your faucet so that the spout is directly over the drain or center of your basin.
How do I choose the best vessel-sink faucets?
Choose "vessel-sink" faucets?: Faucets are often advertised as being specially made for vessel-sink faucets. What these manufacturers are advertising is that their faucets clear the high rim of the vessel sink basin. Faucet heights of four inches or greater should clear most vessel sink basins rims with plenty of room to spare.
What size faucet do I need for a vessel sink?
The faucet should be high enough so that there are at least six inches between the spout and the sink. There are two types of faucets that we particularly recommend for vessel sinks: Vessel sink faucets are faucets specifically made for vessel sinks, meaning that they are tall enough to accommodate the high rim of a vessel sink.
How to choose the right kitchen faucet?
When choosing a faucet, you will need to account for the height above the sink and the length of the faucet’s spout. In considering the height of the faucet, make sure there is enough room between the faucet and the sink to wash one’s hands.
Do vessel sinks need special faucets?
Because their diameter and height will vary, vessel sink faucet selection is a very important part of the design process. Since vessel sinks generally sit above the counter, they require faucets that are slightly different than standard faucets. Faucets can be either deck mounted or wall mounted.
How do you size a vessel sink faucet?
A general rule of thumb is to have your spout 6 inches from the bottom of the sink. For a vessel sink, measure from the counter to the top of the vessel sink. Add at least an inch if not two to the spout height to ensure a vessel faucet fit.
How do I know what size vessel sink I need?
Take the sink measurements A top-mounted vessel sink, as most are, will add anywhere from 4 to 8 inches to the configuration of the countertop. That being stated, it's important to first measure the length and height of your bathroom countertop to determine the right size for your vessel sink.
How far should faucet extend over vessel sink?
Make sure your wall-mounted faucet has at least six inches of space between the spout and the bottom of the basin.
How much room do you need behind a vessel sink for a faucet?
six inchesWhen you're planning your installation, be sure to leave at least six inches between the spout and the sink.
Are vessel sinks still popular?
But there's certainly one trend that's stood the test of time and continues to pop up in bathroom designs all over Pinterest. The Vessel Sink. That's right, vessel sinks are just as popular as ever and continue to evolve into some gorgeous custom designs.
What material is best for a vessel sink?
Granite, marble and quartz tend to be our go-to choices when installing vessel sinks. These options are solid enough that no water will warp it or compromise the integrity of the material, which could put the whole sink at risk.
Do you need a backsplash with a vessel sink?
Unless you have a pedestal sink that doesn't rest against the wall, you do need a backsplash for your bathroom vanity. The reason is practical: a bathroom backsplash protects the wall behind the sink from rot, mold and mildew.
Can you put a vessel sink on any vanity?
Can You Put a Vessel Sink on Any Vanity? Technically you can put a vessel sink on any cabinet. The issues involved though include the height of the cabinet, whether it has an existing countertop or not, and your current plumbing. You can purchase vanities that were designed for vessel sinks, which is ideal.
Can you use a kitchen faucet for a vessel sink?
Kitchen faucets can be used as bathroom faucets, but only if they meet the three holes, 4-inch regulations. We highly recommend against using a kitchen faucet due to the overwhelming number of options available for bathroom sinks.
What is the difference between high arch and low arc faucets?
Low-Arc Faucets. Some kitchen faucets stand quite tall above the kitchen sink. The spouts on these faucets, known as high-arc faucets, typically stand about 8 to 10 inches above the kitchen sink plane. Low-arc kitchen faucets, however, sit only 3 to 8 inches above the sink plane, according to Moen.
What does an 8-inch center faucet mean?
An 8-inch faucet will fit sinks with outer holes that measure 8-inches apart. Does your sink have a distance of 4-inches between its pre-drilled outer holes? Then you can choose one of the following: A 4-inch centerset faucet.
What size hole do I drill for a vessel sink drain?
1.5"In general most vessel sink drains have a 1.5" diameter, so if you are using the "above counter method" of vessel sink installation, you simply need a 1.5" hole to accommodate the drain (or whatever size diameter hole your drain is).
Can you use a kitchen faucet for a vessel sink?
Kitchen faucets can be used as bathroom faucets, but only if they meet the three holes, 4-inch regulations. We highly recommend against using a kitchen faucet due to the overwhelming number of options available for bathroom sinks.
What is the difference between high arch and low-arc faucets?
Low-Arc Faucets. Some kitchen faucets stand quite tall above the kitchen sink. The spouts on these faucets, known as high-arc faucets, typically stand about 8 to 10 inches above the kitchen sink plane. Low-arc kitchen faucets, however, sit only 3 to 8 inches above the sink plane, according to Moen.
How tall should my faucet be?
Low-arc faucets generally go no higher than 8" from the deck and come up at a 45° angle. Great for smaller sinks and spaces, these faucets are best for those that don't often wash large items or don't necessarily want the faucet to be a focal point in the kitchen design.
How high should a faucet be above a sink?
The faucet should be a few inches above the rim of the sink, but not much higher – as that can cause excessive splashing. The distance the spout reaches into the bowl and where the water falls and hits should also be considered. The stream of water should not hit so high on the wall of the vessel that it causes splashing.
What is vessel sink?
There are so many more options today, and vessel sinks are one of the most stylish and elegant ways to dress up the bathroom. They combine modern functionality with old world charm. Their design is actually inspired by wash basins used in centuries past, before the invention of modern indoor plumbing. When a simple bowl and pitcher were placed on ...
What faucets go with Sorrento glass sink?
California Faucets Montecito faucet paired with the Sorrento glass sink from the Bianco Series. Bathrooms are no longer predictably outfitted with conventional white porcelain sinks and chrome widespread faucets. There are so many more options today, and vessel sinks are one of the most stylish and elegant ways to dress up the bathroom.
What is a deck mounted faucet?
Deck-Mount Faucets. Deck-mounted faucets are typically taller than a standard faucet. The most popular style of this type is a single hole, single handle faucet. However, you can also find tall widespread faucets as well as faucets with remote handles.
Can a wall mount faucet be installed inside a wall?
However, installation is a bit more difficult as this requires a rough-in valve inside the wall, meaning the water supply lines are also inside the wall.
Does a stream of water hit the wall of a vessel?
The stream of water should not hit so high on the wall of the vessel that it causes splashing. The necessary length of the spout, or reach, will vary depending upon the angle of the water flow and the shape of the basin, but it is important that the water hits the sink bottom, particularly if it is a shallow sink.
Can a faucet be wall mounted?
Faucets can be either deck mounted or wall mounted. Each sink and faucet installation will share common factors and will have unique aspects to take into consideration. Be sure to work closely with your designer and/or showroom personnel, who have expertise in faucet selection. Ultimately, satisfaction with one’s sink depends to a large degree ...
How much space between sink and faucet?
When trying to choose the best one for you, here are a few things to consider: The Height Of The Vessel Sink Faucet - Make sure theres enough room between the faucet and the sink, a minimum of 6 inches is recommended. This space is necessary so you can have room to wash your hands without hitting the faucet.
What Is A Vessel Sink?
Unlike a typical sink that is dropped into a countertop or installed under the countertop, vessel sinks are installed either entirely or mostly above a countertop.
Why is it important to not have a pop up drain?
This is important to consider when your sink does not have overflow because if someone was to push down on the pop up drain and leave the sink running, there is a possibility that the sink could overflow and cause damage to your home. Especially if the vessel sink will be in areas where small children might have access. For those reasons we generally steer clients toward grid drains before pop up drains, but if they are comfortable with the potential risks involved with the pop up drain, we happily install it.
What is the best sink for a bathroom?
When choosing a vessel sink for bathrooms that will get a lot of regular use, porcelain, glass and stainless steel are great choices. They can all hold up well over time without a lot of care and maintenance, even when cleaned regularly with chemicals.
What is the best material for a kitchen sink?
For places that will get lighter use, such as a powder room, stone and copper are beautiful choices. This is because stone needs regular sealing and can etch and stain when it comes in contact with certain chemicals.
How tall is a standard vanity?
In the past, standard vanity height was about 31”. Now we are seeing that most standard vanities are at the same height as kitchen cabinets, about 36” tall when including the height of the countertop.
Do vessel sinks have overflows?
Vessel Sinks with Overflow: Although there are not as many vessel sinks with overflow, there are some! Here are some of our favorites. Related: The Best Vessel Sinks With Overflow For Your Bathroom. If you fall in love with a sink that DOES NOT have overflow, there is no reason to worry. In the case where you do not have overflow on your vessel ...
How high should a faucet be for a vessel sink?
What these manufacturers are advertising is that their faucets clear the high rim of the vessel sink basin. Faucet heights of four inches or greater should clear most vessel sink basins rims with plenty of room to spare.
How much does a vessel sink cost?
These prices do not include installation, faucets, or vanities. The average cost of vessel sinks is around $235.
What is vessel sink?
A vessel sink is a basin that sits on top of a bathroom vanity or counter, rather than insets like traditional drop-in or under-mount sinks. These sinks are found only in bathrooms, not kitchens, as their size and style would not be practical for the kitchen environment. More specifically, vessel sinks tend to be found in decorative bathrooms, ...
What are the advantages of drop in sinks?
One advantage of traditional drop-in sinks is that the aprons of these sinks have pre-drilled holes for the installation of faucets and handles. But how do you handle the matter of fixtures when it comes to vessel sinks?
What is recessed installation?
Recessed installation: Recessed installation allows for greater basin stability. A hole greater than the diameter of the drain hole, but smaller than the sink diameter, is cut into the countertop. This allows the sink basin to rest about half-way down.
What is the emotion of a vessel sink?
Sometimes that emotion is love, sometimes fervent dislike. Rarely does anyone have a neutral opinion about them.
What are the different types of vessel sinks?
Types: Above and Below Counter. There are two distinct types of vessel sink installations: Above-counter installation: The vessel sink basin rests completely on top of the counter or vanity. When people think of vessel sinks, this is the version they usually have in mind.
How high should I place my faucet?
One of the most important things to consider when opting for a vessel sink is the height and placement of your faucet. The height and placement of your faucet is something you have to give a lot more thought into when going with a vessel sink because you need to accommodate for the higher rim and shallower basin. If the height of your faucet is incorrect, using your sink will be inconvenient because there will not be enough space between the faucet and the basin and there will be more splashing.
What is a vessel sink?
A vessel sink is a basin that sits on top of a bathroom vanity, as opposed to your traditional inset sink. They add style and sophistication to any bathroom. In the past, vessel sinks were considered an exclusive, high-end designer product that only a few could afford. With their surge in popularity, vessel sinks have become more widely available at any price point so that anyone can enjoy the look of a vessel sink.
How high should my bathroom vanity be?
With a traditional sink, all you have to think about is the vanity height. With a vessel sink, you have to factor in the height of your sink to the height of your vanity. Since vessel sinks sit on top of the countertop, the vanity height needs to be lower than normal. If you do not account for your vessel sink when choosing a bathroom vanity, the basin will be too high and will be uncomfortable to use (especially for kids!).
How to stop a vessel sink from splashing?
Aside from height and placement of your faucet (six inches of distance and right above the drain/center), the other thing you can do to prevent splashing in your vessel sink is to adjust the water pressure of your faucet. If your water pressure is too high, this can cause your faucet to pour out a heavy, harsh stream of water which can cause splashing. Another option is to get aerated faucets. Aerated faucets insert air bubbles into the stream to reduce the water pressure so that you get a light, airy, bubbly stream of flow as opposed to a hard stream of water. Aerated water faucets are thus great for vessel sinks.
How much space do you need for a wall mounted faucet?
The same rules apply with height and placement. Make sure your wall-mounted faucet has at least six inches of space between the spout and the bottom of the basin. As with vessel sink faucets, make sure that the spout is directly over the drain or center of your basin. This is why most wall-mounted faucets come with long spouts.
What are the pros and cons of vessel sinks?
Pros: Style: Vessel sinks are a status symbol of luxury and sophistication. They instantly add elegance and charm to your bathroom and definitely give it that “wow” factor. Installation: Since vessel sinks sit on top of the vanity, installation is easier because you can avoid costly and difficult sink cut-outs.
Why is a vessel sink so hard to clean?
Durability: Because the basin is exposed, your sink is more prone to chipping, cracking, and breakage, especially at the edges. Cleaning: Vessel sinks are more difficult to clean, especially at the bottom of the basin where the sink meets the countertop.
