To clean the ADF, follow these steps:
- Turn off the scanner and then disconnect the USB or Ethernet cable and power cable from the scanner.
- Open the scanner lid. Figure : Open the scanner lid
- Clean the white strip on the inside of the scanner cover and the clear scanning strip on the scanner bed. ...
- Open the ADF access door (1) and the roller cover (2) inside the ADF. ...
Full Answer
How do I Clean my ADF scanner?
Gently pull out any jammed paper from the rollers on the bottom of the scanner lid. To avoid tearing any whole sheets of paper, pull the paper with both hands. If the paper tears while you remove it, check the rollers and wheels for any torn pieces of paper that might remain inside the ADF rollers.
How do I remove the ADF from the paper?
Lift the tab located on the front edge of the ADF to raise the ADF mechanism. Gently pull out any jammed paper from the ADF. To avoid tearing any whole sheets of paper, pull the paper with both hands. If the paper tears while you remove it, check the rollers and wheels for any torn pieces of paper that might remain inside the ADF.
How to maintain your HP OfficeJet 4630 series?
All Programs, click HP, click HP Officejet 4630 series, and then click HP Officejet 4630 series. c. In the printer software, click Print, Scan & Fax, and then click Maintain Your Printerto access the printer toolbox. ENWW Improve print quality 99
How do I clear a paper jam from the ADF?
Follow these steps to clear a paper jam from the ADF. Remove any loose paper from the ADF and output trays. Do not remove any jammed paper at this stage because it might damage the ADF mechanism. Press the Power button to turn off the printer.
How do I clean the ADF on my HP printer?
1:325:58Cleaning the Rollers on HP Scanjet Flatbed Scanners with an ADFYouTubeStart of suggested clipEnd of suggested clipOpen the automatic document feeder or ADF patch. Remove any visible lint or dust from each of theMoreOpen the automatic document feeder or ADF patch. Remove any visible lint or dust from each of the feed rollers and the separation pad using a clean lint-free cloth moistened with warm.
How do I open the ADF cover on my HP Officejet 4630?
Lift the tab located on the front edge of the ADF to raise the ADF mechanism.
How do I clean the printheads on my HP Officejet 4630?
On the printer control panel, press the Down Arrow to select Tools, and then press OK. Press the Down Arrow to select Clean Printhead, and then press OK. The printer cleans the printhead, and then prints a printhead test page.
What is the ADF on a HP printer?
The Automatic Document Feeder (ADF) on the printer does not pick up paper. The procedures in this document can help by showing you how to check the paper and clean the ADF mechanism.
How do I reset my HP Officejet 4630 printer?
Factory Reset OfficeJet 4630Disconnect the power cable from the printer while the printer is still ON.Disconnect any other cables if connected the printer.Press and hold the printer's power button for 15 seconds.The printer should be directly connected to the wall outlet and not to a surge protector.More items...•
How do I clean the ADF on my HP Officejet 4620?
HP Officejet 4620 -Turn off the printer. ... Remove all originals from the ADF.Lift the ADF cover.Lightly dampen a clean lint-free cloth with distilled water, then squeeze any excess. ... Use the damp cloth to wipe any residue off the rollers or separator pad. ... Close the cover of the ADF.Lift the scanner lid.More items...
Can you manually clean printer heads?
You can clean the printhead either manually or from your printer or computer. Before you start, you'll want to perform a nozzle check to ensure your printhead needs cleaning, as this will save ink.
How do I run a printhead cleaning cycle?
A standard Print Head Cleaning cycle is done by clicking 'Cleaning' on the Maintenance tab, then waiting a little bit until a message comes up; confirm it and click 'Print Check Pattern. ' From this you can then tell what sort of Deep Clean you need to do by which lines (black or colour) are faded.
How do I get my printer heads to clean automatically?
Access the printer software. Click the Maintenance tab, then click the Auto Nozzle Check and Cleaning button. Follow the on-screen instructions. The power light flashes while the printer performs the cleaning cycle.
How do you fix ADF error?
0:006:19Fixing ADF Paper Pick-Up Issues | HP Officejet | HP - YouTubeYouTubeStart of suggested clipEnd of suggested clipFirst turn the printer off and on again. This will sometimes fix the issue. Press the power buttonMoreFirst turn the printer off and on again. This will sometimes fix the issue. Press the power button to turn the printer. Off. Once the printer is off wait 60 seconds.
Why is my ADF not working?
SOLUTION: If your automatic document feeder is not working correctly with your ScanSoft product, check to make sure the document feeder is properly connected and not jammed. If it has a separate power switch, make sure it is ON. Shut down your computer properly and turn off the scanner and document feeder.
How do I disable ADF on my printer?
Click on Configuration > Button Settings > Device Settings > Device Scan Settings. Uncheck the Auto Crop setting. Click Apply > OK. Attempt to scan again using the ADF.
How do you fix ADF error?
0:006:19Fixing ADF Paper Pick-Up Issues | HP Officejet | HP - YouTubeYouTubeStart of suggested clipEnd of suggested clipFirst turn the printer off and on again. This will sometimes fix the issue. Press the power buttonMoreFirst turn the printer off and on again. This will sometimes fix the issue. Press the power button to turn the printer. Off. Once the printer is off wait 60 seconds.
Why is my ADF not working?
SOLUTION: If your automatic document feeder is not working correctly with your ScanSoft product, check to make sure the document feeder is properly connected and not jammed. If it has a separate power switch, make sure it is ON. Shut down your computer properly and turn off the scanner and document feeder.
How do I fix the document feeder jam on my HP printer?
0:062:39Fix Document Feeder Jam HP OfficeJet 8010,8030 ... - YouTubeYouTubeStart of suggested clipEnd of suggested clipLower the document feeder tab. And then push down the cover until it snaps into place lift theMoreLower the document feeder tab. And then push down the cover until it snaps into place lift the document feeder tray shine a flashlight in the area under the tray remove.
How do you get rid of a paper jam in ADF?
Paper Jams in the Automatic Document FeederCancel the print job, if necessary.Remove your originals from the ADF.Open the ADF cover, then carefully remove any jammed paper. ... Leave the ADF cover open, then raise the scanner unit.Press the tabs and remove the document mat.Carefully remove any jammed paper.More items...
How to release ink cartridge?
To release the ink cartridge, lift the lid on the ink cartridge slot, and then gently push the lid back until it stops.
What to do if your printer is missing ink?
If you just set up your printer and you notice that black ink is missing or faded on your printouts, follow these steps to remove the black ink cartridge and print only with the tri-color ink cartridge. This allows the printer to operate in single-cartridge mode, which creates composite black from the tri-color ink cartridge.
How long does it take for a printer to rest in single cartridge mode?
If the printer operates correctly in single-cartridge mode, let the black ink cartridge rest with the nozzles facing up for several hours or overnight, reinstall it, and then try to print again. If you are satisfied with the print quality, you can stop troubleshooting.
How to fix vertical streaks in notreplace?
Vertical streaks in copies can often be fixed by cleaning the scanner glass.
Can low ink levels affect print quality?
However, the printer might still perform a limited amount of printing in 'backup mode' at low ink levels. In backup mode, blacks might not be as dark, or printouts might be in grayscale (shades of gray with no color). Replace any low ink cartridges if backup mode printing is unacceptable.
How long to wait to fix print quality issues?
Sometimes, print quality issues can be resolved during a period of inactivity. Consider waiting for about 30 minutes, and then try the print job again.
What type of paper is used for HP ink?
For everyday text documents, plain paper with ColorLok technology works well. Paper with ColorLok technology is industry-standard paper that works well with HP ink.
How to print Quick Forms?
To print Quick Forms 1. From the Home screen on the printer display, press the Upand Downbuttons to select Quick Forms, and then press OK.
What does it mean when your printer is blinking?
Fast blinking Error has occurred. Refer to the messages on the printer display. Pulsing Indicates that the printer is initializing or is being shut down. On The printer is printing, scanning, copying, or is on and ready to print.
How to fix a wireless printer that is blinking?
Off Wireless is off. Press the Wirelessbutton to access the wireless menu on the printer display. Use the wireless menu to enab le wireless printing. Slow blinking Wireless is connecting or is on but not connected to a network. If the connection cannot be established, make sure the printer is within the range of wireless signal. Fast blinking A wireless error has occurred. Refer to the messages on the printer display. On Wireless connection has been established and you can print.
What is the Onbutton feature?
Feature Description 1 Onbutton: Turns the printer on or off.
What type of port does a serial type phone use?
In a serial- type phone system, the connector type on your shared telephone equipment (modems, phones, and answering machines) does not allow a physical connect ion to the "2-EXT" port on the printer. Instead, all equipment must be connected at the telephone wall jack.
What is the network configuration page?
Print a network configuration page. The network configuration page displays the network status, hostname, network name, and more.
Can you load envelopes into the paper tray on HP OfficeJet 4630?
You can load one or more envelopes into the paper tray of the HP Officejet 4630 series. Do not use shiny or embossed envelopes, or envelopes that have clasps or windows. NOTE:For details on how to format on envelopes, see the help files in your word application. To load envelopes 1.
