How do i clear my health o meter scale?
- Place the Health-O-Meter scale on a flat surface. Make sure the scale is indeed level. …
- Tap the lower left or right corner of the scale three times. After you do this, you’ll notice the display shows “—.”
- Wait a few seconds for the scale to reset and recalibrate.
Full Answer
How to reset health o meter scale?
Let’s learn how to reset health O meter scale. If you the scales, you must reset them, according to the Health-O-Meter. The instruction manual for the Health-O-Meter scale includes instructions on calibrating the scale. As a result, you must calibrate the scale and reset it to 0.0.
How do I calibrate the health-o-meter scale?
Place the Health-O-Meter scale on a flat surface. Make sure the scale is indeed level. Tap the lower left or right corner of the scale three times. After you do this, you'll notice the display shows "---." Wait a few seconds for the scale to reset and recalibrate.
How are digital health o meters set up?
Digital Health o meters are set up the same way any other electronic device is. The scale may not register at 0.0 because the batteries are low or new, the scale has been moved, or brand new.
Why is the zero on my health meter not visible?
If your health meter is moved or the batteries run out, you must reset it. If this occurs, the zero number on your scale may not be visible. You must calibrate your health meter to return it to a value of 0.0. Health o meter scales are calibrated in kilograms (kg) and pounds (lbs) units of measurement.
Step 1
Place the Health-O-Meter scale on a flat surface. Make sure the scale is indeed level.
Step 2
Tap the lower left or right corner of the scale three times. After you do this, you'll notice the display shows "---."
Step 3
Wait a few seconds for the scale to reset and recalibrate. When it's ready for use, it will display "LB" or "KG," depending on your display selection.
When Does the Health O Meter Scale Need to Be Calibrated?
Before learning how to calibrate, you must first understand when to reset or “calibrate” it. If your health meter is moved or the batteries run out, you must reset it.
4 Easy Steps on Calibrating Health O Meter Scale
If your scale displays the letter “E” on its screen, this indicates to calibrate your scale. It could also suggest that the maximum weight load has been surpassed.
Conclusion
Everything about how to calibrate Health O Meter scale is here we went through. We hope you found our information useful.
How to contact Health O Meter?
However, if your scale needs to be re-calibrated, please email [email protected] with your scale's model number to receive detailed instructions or contact our Technical Support team at 1 (800) 638-3722. Visit http://homscales.com/calibration to learn more.
Who sells health o meters?
Health o meter® consumer scales that are sold through retail stores are serviced by Jarden Consumer Solutions. You can call them at 1 (800) 672-5625 or visit their website at www.healthometer.com.
How to contact Homscales?
Please e-mail your questions along with your scale's model and serial numbers to [email protected]. If you prefer, you may contact us at 1 (800) 638-3722.
