Install the Leviton combination switch and receptacle into the wall. Using the two screws that were provided with the device, attach the device to the top and the bottom of the single gang electrical box.
Where can I use my Leviton USB outlet?
Leviton USB Outlets are perfect for use in kitchens, bedrooms and home offices - anywhere you charge your devices! In this blog post, we'll show you step-by-step instructions on how to wire a Leviton USB Outlet/Charger.
Why can't I connect to the my Leviton app?
1 Make sure you have the latest version of the My Leviton App. ... 2 If available, try using a different mobile phone or tablet running the My Leviton app. ... 3 If you are using an Apple device with iOS 14 or later, you can connect in the W-Fi setting but the My Leviton app is not able to communicate, please ... More items...
What type of cable do I need to install Leviton?
For both basic and residential, Leviton recommends a minimum of Cat 5e or Cat 6 twisted-pair cable for telephone and data; RG-6 quad-shield coax cable for video cable, CATV, TV, DSS, and monitoring; and 16/2 or better class III stranded copper for speakers. 4.2Data and Telephone Distribution
How do I replace an old wall outlet with a USB?
1) Remove the wall plate using a flat head screwdriver. 2) Remove the old outlet from the wall box by loosening the screws with your phillips screwdriver. 3) Connect the wires from the wall box to the USB Outlet, as shown below:
How do you wire a Leviton back and side wire?
0:432:06How to Wire a Device Using the Internal Back Wire Method - YouTubeYouTubeStart of suggested clipEnd of suggested clipNext simply insert the conductor into the back wire hole until it bottoms out then use a screwdriverMoreNext simply insert the conductor into the back wire hole until it bottoms out then use a screwdriver. And turn the corresponding terminal screw clockwise to securely terminate the conductor.
How do you wire a Leviton 15 amp outlet?
1:149:13How to Install an Electrical Wall Outlet | Leviton - YouTubeYouTubeStart of suggested clipEnd of suggested clipSo I've gone ahead and completely remove the old outlet. Now I have two cables that are coming in toMoreSo I've gone ahead and completely remove the old outlet. Now I have two cables that are coming in to my box right. So I took the two wires coming out of each cable. And just group them to the side.
How do you wire a Leviton 20 Amp plug?
0:373:12How to install a Leviton CR20 Receptacle - YouTubeYouTubeStart of suggested clipEnd of suggested clipAnd unwire the device. So the next thing I want to do is go ahead and put a hook in my black wire myMoreAnd unwire the device. So the next thing I want to do is go ahead and put a hook in my black wire my hot wire. I'm going to go ahead and take that wire and make sure I connect it to my brass terminal.
Which wires go to which screw on an outlet?
0:381:37How to Connect Wires to Terminal Screws - YouTubeYouTubeStart of suggested clipEnd of suggested clipHere's a tip the white wire always goes to the silver screw. The red or black wire goes on the brassMoreHere's a tip the white wire always goes to the silver screw. The red or black wire goes on the brass. Screw.
Does it matter which wire goes where on an outlet?
The screw terminal should not be touched by the insulation. The white neutral wire can be used on either of the two silver terminals. The black hot wire can be put on either brass screw terminal.
How do you wire a 2 prong Leviton plug?
1:062:19How to Fix a Broken Power Cord Plug Using the Leviton 2-prong Repair ...YouTubeStart of suggested clipEnd of suggested clipGive both wire ends a few twists to bind the strands. Together. Then bend the wire into a hook in aMoreGive both wire ends a few twists to bind the strands. Together. Then bend the wire into a hook in a clockwise direction. And when you wrap it around the screw again you want to go in a clockwise.
How do you hook up a 20 amp outlet?
6:408:18How To Install A 20 Amp Electrical Outlet - YouTubeYouTubeStart of suggested clipEnd of suggested clipSome people use electric drill to run these in with it would be a little bit quicker. I just use aMoreSome people use electric drill to run these in with it would be a little bit quicker. I just use a screwdriver. Works.
How do you wire a 20a receptacle?
Wiring a 20-Amp 240-Volt Appliance Receptacle The outlet should be wired to a dedicated 20-amp/240-volt circuit breaker in the service panel using 12|2 awg cable. With this wiring, both the black and white wires are used to carry 120 volts each and the white wire is wrapped with electrical tape to label it hot.
How do you tell if outlet is 15 or 20 amps?
0:403:44How to check if you have 15amp or 20amp circuit in home - YouTubeYouTubeStart of suggested clipEnd of suggested clipAnd again it has a t-shaped neutral slash so it can receive a special 20 amp plug in addition to theMoreAnd again it has a t-shaped neutral slash so it can receive a special 20 amp plug in addition to the standard 15 amp plug. However. Your 15 amp plug receptacles.
How do you wire a 3 prong outlet to Leviton?
1:443:52How to Wire Leviton Black & White Electrical Connectors and PlugsYouTubeStart of suggested clipEnd of suggested clipGroup then taking my Phillips tighten the terminal screw lastly I'm going to connect my remainingMoreGroup then taking my Phillips tighten the terminal screw lastly I'm going to connect my remaining three wires cert them into the wire wells. And connect them to the brass terminals.
How do I wire a GFCI Leviton outlet?
1:267:13How to Install a GFCI Outlet, AFCI and Dual AFCI/GFCI Outlet | LevitonYouTubeStart of suggested clipEnd of suggested clipThis is done by attaching the wires that lead to the downstream outlets onto the terminals that areMoreThis is done by attaching the wires that lead to the downstream outlets onto the terminals that are marked load.
How do you wire a 3 wire plug?
0:462:19How to wire a South African three pin plug top - YouTubeYouTubeStart of suggested clipEnd of suggested clipThis. Please note that the screw must fasten onto the copper the screw must not fasten onto theMoreThis. Please note that the screw must fasten onto the copper the screw must not fasten onto the jacket. Fasten the earth wire to the topmost. Pin.
How do you wire a Leviton 50a surface mount outlet?
3:174:47How to Install the 55054 Surface Mount Power Outlet | LevitonYouTubeStart of suggested clipEnd of suggested clipUnder the bottom of each retaining screw insert the ground wire under the green screw. The whiteMoreUnder the bottom of each retaining screw insert the ground wire under the green screw. The white neutral wire under the silver. Screw. And the remaining hot wires under the brass terminals.
What is a Leviton connected home system?
Leviton Connected Home Systems are composed of a series of smaller subsystems. The Structured Media system covers all of your data, telephone, and entertainment needs. This system or infrastructure comes with the following:
What service providers are required to install Leviton connected home systems?
The telephone, CATV, and other communications service providers serving your site may have special requirements and services that you should know about prior to planning and installing Leviton Connected Home systems.
What is a Leviton splitter?
Leviton passive video splitters (1x6 and 1x8) are basic video distribution units. Depending on your specific job or configuration, a passive splitter may not be sufficient to serve all of your intended devices with clear reception. Several factors will affect reception, including:
How many volts are in a tip and ring?
Fifty (50) to sixty (60) volts DC is normally present on an idle tip-and-ring pair. Ninety (90) volt AC ringing current can deliver an uncomfortable shock under certain circumstances. Consequently, always use insulated tools and avoid all contact with bare terminals and grounded surfaces.
How far apart should telephone wires be?
Never place telephone wire in any conduit, box, channel, duct, or other enclosure containing power or lighting circuits of any type. Always provide adequate separation of telephone wiring and other electrical wiring according to code. When in doubt about separation distances, the “Rule of Sixes” can be used. This rule requires six feet of separation between telephone wiring and open, high-voltage wiring, lightning grounding wire, or grounding rods. It requires six inches of separation from all other high-voltage wiring unless in conduit.
Will the future be filled with low voltage appliances?
The future will be filled with more low-voltage appliances and devices, not fewer. Keep expansion in mind when you discuss the system installation.
Can you cut concealed wiring?
Cutting and Drilling:Always observe trade safety rules for concealed wiring. Be extremely careful not to cut through or drill into concealed wiring or pipes. Make a small inspection opening before cutting or drilling.
How to contact Leviton technical support?
Contact our technical support team at [email protected]. Please include the type and model of mobile devices you are using and the model number of the Decora Smart device.
How to reset Decora smart Wi-Fi?
Factory Reset the Decora Smart Wi-Fi device by pressing and holding the top paddle for 15 seconds (until the LED begins to flash red and amber), then release the paddle. After a few seconds, the LED will flash green.
What is the first 2 characters of a Decora smart Wi-Fi device?
Before you begin, please verify that you are attempting to enroll a Decora Smart Wi-Fi device. The first 2 characters of a Decora Smart Wi-Fi device is DW (e.g. DW 15S, DW 6HD, DW 15P, etc.). If the device begins with a DH or DZ (e.g. DH 15S, DZ 15S, etc.), it is not a Decora Smart Wi-Fi device and cannot be used with the My Leviton App.
What to do if your LED lights are amber?
If the LED flashes amber, please make sure that you are entering the correct password for the Wi-Fi network that you are connecting to. The password is case specific. You can press the eye icon to see the text to make sure you entered it correctly.
Can I use my Leviton app on my Decora smart home?
Other Leviton mobile app, such as Decora Smart Home or Decora Digital Dimmer & Timer cannot be used for Decora Smart Wi-Fi devices.
How to remove a wall plate from a wall box?
1) Remove the wall plate using a flat head screwdriver. 2) Remove the old outlet from the wall box by loosening the screws with your phillips screwdriver. 3) Connect the wires from the wall box to the USB Outlet, as shown below: Click for larger version.
Can you side wire a terminal?
To Side Wire: (if more than one wire is required on a terminal, you cannot side wire and must use the back wire option) Using your wire strippers, remove insulation from each wire per the strip gauge found on the back of the device [approx. 3/4" (1.9 cm)].
How to contact Leviton technical support?
Contact our technical support team at [email protected]. Please include the type and model of mobile devices you are using and the model number of the Decora Smart device.
How to reset Decora smart Wi-Fi?
Factory Reset the Decora Smart Wi-Fi device by pressing and holding the top paddle for 15 seconds (until the LED begins to flash red and amber), then release the paddle. After a few seconds, the LED will flash green.
What to do if your LED lights are amber?
If the LED flashes amber, please make sure that you are entering the correct password for the Wi-Fi network that you are connecting to. The password is case specific. You can press the eye icon to see the text to make sure you entered it correctly.
Can I use my Leviton app on my Decora smart home?
Other Leviton mobile app, such as Decora Smart Home or Decora Digital Dimmer & Timer cannot be used for Decora Smart Wi-Fi devices.
Description
With the My Leviton skill and Alexa, you can now interact with your Decora Smart WiFi devices and activities by voice. To get started, select the ‘Enable Skill’ button in the Alexa App to link your My Leviton account and discover your device (s). Find more information about connecting Smart Home devices at http://amzn.to/291lR7u.
Skill Details
Smart Home Skill. This skill may share device information with Amazon. Learn more.
Supported Languages
There was a problem filtering reviews right now. Please try again later.
