Connect LabQuest to the USB port on the computer. Open Logger Pro or Logger Lite. When the software successfully connects, the LabQuest screen will show two arrows, indicating that LabQuest is connected.
How do I get Started with LabQuest®2?
Getting Started with LabQuest®2 2 2. Connect an analog sensor to the CH 1 port on LabQuest or connect a digital sensor to the DIG 1 port. LabQuest App will auto-ID the connected sensor and automatically set the default collection rate for the sensor. TIP!
How do I use LabQuest 2 with a computer or Chromebook?
LabQuest 2 can be used as a USB sensor interface with a computer or Chromebook. To collect data, follow these steps: 1. Connect a wired (BTA or BTD) sensor to LabQuest.
How do I retrieve data from LabQuest to a computer?
If you collect data in LabQuest App and subsequently connect LabQuest to a computer, then Logger Lite or Logger Pro3 will automatically detect the presence of the remote data and display a message indicating the data can be retrieved from LabQuest. Follow the onscreen instructions to download data to the computer.
How do I use LabQuest 2 as a sensor interface?
LabQuest 2 can be used as a USB sensor interface with a computer or Chromebook. To collect data, follow these steps: 1. Connect a wired (BTA or BTD) sensor to LabQuest. Note:USB and Wireless sensors cannot be used when LabQuest is being used as a sensor interface.
How to connect Labquest to USB?
How to open LabQuest browser?
How to move data from LabQuest to computer?
What is a screen shot in LabQuest?
Can you share data from LabQuest 2?
Can LabQuest connect to the same WiFi?
See 3 more
About this website
How do I transfer data from LabQuest 2 to my computer?
How do I move data from a LabQuest to a computer?Connect LabQuest to the USB port on a computer.Start Logger Pro or Logger Lite. When the software successfully connects, the LabQuest screen will show two arrows, indicating that LabQuest is connected.The computer program will offer to import the data.
Does LabQuest 2 have Bluetooth?
Compatible Sensors Connect this sensor via Bluetooth® for best results. Connect this sensor via USB. Wireless data collection is not supported.
How do I export data from LabQuest 2?
0:154:16LabQuest Data Export - YouTubeYouTubeStart of suggested clipEnd of suggested clipTo start the process first insert your USB flash drive into the USB port of the labquest. OnceMoreTo start the process first insert your USB flash drive into the USB port of the labquest. Once that's done you'll need to load the information that you want to export. To begin the process click file.
How do you use LabQuest 2?
4:2210:51LabQuest 2 Tutorial - YouTubeYouTubeStart of suggested clipEnd of suggested clipThe labquest can collect data in a variety of modes. And you'll see the mode indicator. Up here inMoreThe labquest can collect data in a variety of modes. And you'll see the mode indicator. Up here in the upper right of the screen. And this is where you can change the mode. So by tapping on that mode.
How much does a LabQuest 2 cost?
$329Retail Price: $329, LabQuest Replacement Battery (LQ-BAT, www.vernier.com/products/accessories/lq2-bat/), $19.
How do I connect my Vernier Bluetooth to my computer?
Choose Wireless Device Setup > Go Direct… from the Sensors menu. Choose your sensor from the list of discovered devices and tap OK. The app will identify the sensor and load a default data-collection setup. The Bluetooth LED on the sensor will blink green when it is successfully connected.
Can you directly transfer data from a data logger to a computer?
With the simplest stand-alone data loggers, data are directly offloaded to a computer via a USB interface.
How do I update LabQuest?
Apply the updateTurn LabQuest 2 on.Connect the AC adapter or place LabQuest 2 in the LabQuest Charging Station.Connect the USB drive or insert the Micro SD card into LabQuest 2. ... The update will start automatically and will take less than eight minutes to complete (less than four minutes when using a Micro SD card).More items...
What does a LabQuest do?
LabQuest is a standalone and computer interface for Vernier sensors. Use its color touch screen to collect, graph, and analyze data in your classroom or in the field.
How do you turn on LabQuest?
Find the power button in the upper left corner, and press it. If the screen does not light after a moment, connect the power adapter to the LabQuest and to a power source. LabQuest is controlled by the screen and the navigation cluster below the screen.
How do you use LabQuest stream?
0:035:22Vernier LabQuest Stream Overview - YouTubeYouTubeStart of suggested clipEnd of suggested clipOn. Now after I press the power button the power LED will turn green and the Bluetooth LED willMoreOn. Now after I press the power button the power LED will turn green and the Bluetooth LED will start flashing. This lets you know that it's ready for our connection.
How do I open a LabQuest file?
To open the qmbl file on a computer, you will need to use either Logger Lite or Logger Pro. In Logger Pro 3.8 or newer, you can simply double-click the qmbl file and Logger Pro will open it. Similarly, Logger Lite versions 1.5 and newer can open a . qmbl file.
What does a LabQuest do?
LabQuest is a standalone and computer interface for Vernier sensors. Use its color touch screen to collect, graph, and analyze data in your classroom or in the field.
How do I update LabQuest?
Apply the updateTurn LabQuest 2 on.Connect the AC adapter or place LabQuest 2 in the LabQuest Charging Station.Connect the USB drive or insert the Micro SD card into LabQuest 2. ... The update will start automatically and will take less than eight minutes to complete (less than four minutes when using a Micro SD card).More items...
What is Labpro?
LabPro is a versatile sensor interface for calculator and computer data collection. ORDER CODE: LABPRO.
How many analog input channels are there on a LabQuest 2 that would allow temperature and pressure probes?
three analog sensor portsLabQuest has three analog sensor ports (CH 1, CH 2, and CH 3) for analog sensors such as our pH Sensor, Temperature Probe, and Force Sensor.
Download Logger Pro for Windows - 3.16.2 - Digital Trends
Get detailed insights of your experiments in a graphical form. Logger Pro is a high-end graphing software program, which has been developed for data monitoring, analysis, and collection.The tool is compatible with different sensors and connects your Windows PC to process collected information.
How do I save a LabQuest experiment file to a USB flash drive or SD ...
Experiment files created using the LabQuest App can be saved to a USB drive for transfer to Logger Pro.Follow these steps: Record experiment data, or choose Open from the File menu to load a previously-saved experiment.
Vernier LabQuest™ Reference Guide
LabQuest Reference 6 Choose Save As… from the LabQuest Browser (found in the File menu), and enter a descriptive file name. Any data, and the sensor configuration, will be stored on the LabQuest
Logger Lite (free) download Windows version
Logger Lite makes collecting science and math data easier than ever. The simple interface makes learning intuitive by making science visual. Main features: - Learn Visually and Intuitively: Rather than tell students that water changes state at 0°C, let them see it for themselves!
Can you use Labquest Viewer with USB?
If you are in an area where Wi-Fi is unavailable or unreliable, it is possible to use LabQuest Viewer to connect to LabQuest 2 or LabQuest 3 via USB. This is a useful way to display the LabQuest screen for a class demonstration. The instructions below assume you have LabQuest software version 2.3.3 or newer.
Can you use LabQuest as a Chromebook?
Caution: While LabQuest is configured to work with the viewer via USB, you cannot use it as a computer (or Chromebook) interface with Logger Pro, Logger Lite, Graphical Analysis, or Graphical Analysis Pro . To allow your LabQuest to work as a computer or Chromebook interface, you must disconnect the USB and then un-check Enable Viewer.
How to turn on LabQuest?
1. Press and release the power button located on the top edge of LabQuest to turn on the unit. LabQuest App launches automatically.
When did Labquest 2 come out?
LabQuest 2, first shipped in March 2012, comes with a Quick-Start Guide to get you started with basic data collection and analysis. The LabQuest 2 User Manual is an extended guide detailing the features, hardware, and software of LabQuest 2. This document represents features available in the 2.8.7 version of LabQuest 2 software released in September 2021.
How many sensors does LabQuest have?
LabQuest has three analog sensor ports (CH 1, CH 2, and CH 3) for analog sensors such as our pH Sensor, Temperature Probe, and Force Sensor. Also included is a full-size USB port for USB sensors, USB flash drives, and USB printers. In addition to the power button, the top edge of LabQuest has two digital sensor ports (DIG 1 and DIG 2) for Motion Detectors, Drop Counters, and other digital sensors.
What is LabQuest app?
The data-collection and analysis software, LabQuest App, is the heart of LabQuest. When you turn on LabQuest, the LabQuest App starts automatically. If the LabQuest App is not displayed on your screen, launch LabQuest App from the Home screen.
How long to charge LabQuest?
We recommend charging the battery for at least 12 hours prior to using LabQuest for the first time on battery power. To do this, connect the included power adapter to LabQuest and an AC power source. You can also charge LabQuest using the LabQuest Charging Station (order code LQ2-CRG, sold separately). LabQuest uses a high-quality lithium-ion battery. This is the same chemistry used in premium laptop and cell phone batteries, and you can expect similar performance. There is never a need to condition the battery by regular full discharge/charge cycles. It is safe to leave the battery charging indefinitely, and there is no need to fully discharge the battery before charging. Battery life will depend on the sensors used, but in most cases you can obtain six or more hours of use before recharging. We recommend charging LabQuest overnight to start the next day with a full charge. For more details about the battery, see LabQuest Battery.
Where is the power button on LabQuest?
Once LabQuest is connected to AC power or the battery has charged, press the power button located on the top of the unit, near the left edge. LabQuest will complete its booting procedure and automatically launch the LabQuest App by default, as shown above. If the screen momentarily shows a charge battery icon or does not light after a moment when used on battery power, connect the power adapter to LabQuest and to an AC power source, then try the power button again.
Is Vernier LabQuest 2 a medical device?
Note:Vernier LabQuest 2 is designed for educational use. This product, related sensors, and accessories are not designed or to be used for any industrial, medical, or commercial process such as life support, patient diagnosis, control of a manufacturing process, or industrial testing of any kind. The included software is provided “as is." Vernier makes no warranties as to performance, merchantability, fitness for a particular purpose, or any other warranties whether expressed or implied.
What is a LabQuest?
The LabQuest is a computer running its own version of the Linux operating system, and the LabQuest App, the Periodic Table and other features are programs that run in the operating system.
What is the LQM on the Labquest CD?
The LabQuest Emulator (LQM) is included on the LabQuest CD. It is also available for download from www.vernier.com/labquest/updates The LQM is computer software that can be used to demonstrate the functions of a LabQuest on a computer.
What language is LabQuest?
LabQuest App can display menus in English, French, Italian, Spanish and German. To set the device language, open the Control Panel described above, and choose System Information. Select the Region tab, and choose the desired language. A restart will be required.
What is the File menu in LabQuest?
The File menu is similar to the File menu on a computer. Here you can save and open files, print, change settings, and quit the application. LabQuest App can read and write files to LabQuest memory, a sort of virtual hard disk. Files contain experimental setup, data,
How many tabs are there in LabQuest?
This section reviews the features and functions of the LabQuest App in detail. First the overall LabQuest screen, and then the four tabs and their special contents, are described.
Does LabQuest turn off when battery is discharged?
The LabQuest screen will dim after a few minutes of no use, even during data collection. However, it will not turn itself off until the battery is almost discharged. No data will be lost, as LabQuest App will save a backup file before shutting down.
Can LabQuest read NTFS?
The drive or card may be formatted in FAT16 or FAT32 (the most common Windows and Mac OS formats) for reading and writing. LabQuest cannot read NT FS- or HFS+-formatted drives.
How can I use Labquest 2 to collect data?
Use professional pre-built templates to fill in and sign documents online faster. Get access to thousands of forms.
Accredited Business
Guarantees that a business meets BBB accreditation standards in the US and Canada.
How to connect Labquest to USB?
Connect LabQuest to the USB port on the computer. Open Logger Pro or Logger Lite. When the software successfully connects, the LabQuest screen will show two arrows, indicating that LabQuest is connected. Choose LabQuest Browser from the File menu, and then choose Open.
How to open LabQuest browser?
Choose LabQuest Browser from the File menu, and then choose Open.
How to move data from LabQuest to computer?
Options include connecting LabQuest to a computer via USB, saving the data to a USB thumb drive, or e-mailing the data.
What is a screen shot in LabQuest?
Screenshot takes a screenshot of everything that was on screen at the time the option was selected and sends you .png image file. This is most commonly used when students have already analyzed the data on LabQuest, annotated the graph, or wish to include an exact copy of what is on screen in a lab report.
Can you share data from LabQuest 2?
Finally, you can Data Share from a LabQuest 2 or LabQuest 3 to our Graphical Analysis and Graphical Analysis Pro apps and then export the data from that software by following these steps (this option is not available with the original LabQuest):
Can LabQuest connect to the same WiFi?
Connect both the LabQuest and the computer/device to the same WiFi network.
