Set the soundbar to Bluetooth pairing mode. Repeatedly press Source on the remote or soundbar until the soundbar's display reads BT > WAIT > BT PAIRING. If the soundbar displays BT READY, press and hold Source on the soundbar until BT PAIRING displays.
How do I connect my Bluetooth earbuds to my phone?
1 On your device, go to Settings > Bluetooth and turn on Bluetooth. Stay on this screen until you complete the steps to pair your accessory. 2 Place your accessory in discovery mode and wait for it to appear on your device. ... 3 To pair, tap your accessory name when it appears onscreen. You might need to enter the PIN or passkey. ...
How do I Pair my SoundBar with Bluetooth?
Repeatedly press Source on the remote or soundbar until the soundbar's display reads BT > WAIT > BT PAIRING. If the soundbar displays BT READY, press and hold Source on the soundbar until BT PAIRING displays. If the soundbar does not go into Bluetooth mode after using these different methods, visit the Support Center to request service.
How do I Pair my sb240 via Bluetooth?
2. Pairing your SB240 via Bluetooth. flashes quickly between red and blue. requirements. If prompted for a PIN, enter: “0000.” 3. Confirm successful pairing. Your device will show that SB240 is “paired.”
How to charge a soundbot sb240?
SoundBot SB240 manual 1 Charge headset for at least 2 hours. (via USB) LED will light up when charging. ... 2 Pairing your SB240 via Bluetooth. In power off mode, press and hold the multifunction key for 7 seconds until LED flashes quickly between red and blue. ... 3 Confirm successful pairing.
How to pair BT remote?
Why is my Bluetooth not working?
What to do if your phone won't do a hard reset?
How to do a hard reset on a device?
See 1 more
About this website
How do I use SoundBot Bluetooth?
0:454:08Soundbot SB360 Bluetooth Car Kit Review - YouTubeYouTubeStart of suggested clipEnd of suggested clipSo then we have the USB cable that powers the device. And the axillary cable so it will actuallyMoreSo then we have the USB cable that powers the device. And the axillary cable so it will actually plug this in the car to have the audio play of the vehicles.
How do I connect my phone to my sound bot?
For Android smartphones – Press Settings > “Wireless and network” > “Bluetooth settings” > Bluetooth (Enable) > Scan devices Press BTH220 once it shows up. If prompted, enter the pairing password as “0000”. The blue LED on the headphones will flash three times if the connection is successful.
How do you use a SoundBot shower speaker?
0:261:44SoundBot SB571 bluetooth speaker quick demo - YouTubeYouTubeStart of suggested clipEnd of suggested clipA 3.5 audio cable a microUSB charging cable and a user menu bluetooth pairing can be done byMoreA 3.5 audio cable a microUSB charging cable and a user menu bluetooth pairing can be done by switching the power on and once though LED indicator signal starts flashing and alternating lights find.
How do I pair a SoundBot SB571?
After turning on the SB571, the LED lights will alternate between red and blue to indicate that the speaker is in "pairing mode." 5. Choose "add new Bluetooth device" or "setup Bluetooth device" on your media player device to search for Bluetooth devices. Select SB571 to pair and connect.
How do I turn the volume up on my SoundBot?
Press and hold the on-board volume control button to increase the volume of SoundBot SB512 / SB510 / SB510S / SB511 / SB513 / SB517. Use the volume control on the cell phone or other media player device to increase the volume.
How long does it take SoundBot to charge?
We only got about a 45 minutes worth of listening time out of it. From a dead battery, you can fully charge the SoundBot in less than an hour.
How do I connect my Soundbot shower speaker to my phone?
0:512:22SoundBot SB510 bluetooth wireless shower speaker unboxing demoYouTubeStart of suggested clipEnd of suggested clipNext track and the play/pause button to get the Bluetooth the pairing we're gonna hold down theMoreNext track and the play/pause button to get the Bluetooth the pairing we're gonna hold down the power button for about 6 seconds. And here the first beep.
How do you connect your phone to a shower speaker?
1:463:57ShowerSong Bluetooth Waterproof Wireless Shower Speaker - YouTubeYouTubeStart of suggested clipEnd of suggested clipAnd click on the Bluetooth. Icon. And you can see it's already found the shower song speaker. So I'mMoreAnd click on the Bluetooth. Icon. And you can see it's already found the shower song speaker. So I'm going to click into that and it. Should then actively pair to the shower song Bluetooth speaker.
How do I reset my Bluetooth Shower speaker?
Press and hold both the power and the “volume down” buttons for around 6 seconds until you hear the device power off. Turn on the speaker and use it as you would a new speaker.
How do I pair a Soundbot sb520?
6:247:34SoundBot SB520 Bluetooth Wireless Speaker Unboxing & ReviewYouTubeStart of suggested clipEnd of suggested clipSo straightforward. Once you have the power button turned on on the front there. That's all it takesMoreSo straightforward. Once you have the power button turned on on the front there. That's all it takes you guys you just plug it in. And ya tap on the 520. And your paired.
How do I connect to my Bohm speaker?
0:112:45How to pair Böhm Xtra Impact Bluetooth Speaker to your PhoneYouTubeStart of suggested clipEnd of suggested clipIn this case you're happy in my iphone. And I go through the settings menu. And I go to bluetooth.MoreIn this case you're happy in my iphone. And I go through the settings menu. And I go to bluetooth. And I enabled Bluetooth here and then it's going to scan for the available devices.
How do I connect to Craig speakers?
Power on the external BT Device and enter to BT searching mode. Start pairing following the on-screen instructions from the external BT Device. After paired, the unit will sound a prompt tone and the Blue Indicator will stop blinking. If pairing is complete you may now play music with your external BT Device.
How do you charge a Soundbot beanie?
1:562:28SoundBot SB210 Bluetooth Musical Audio Beanie Hat Cap unboxingYouTubeStart of suggested clipEnd of suggested clipOkay up next is charging the charging port is at the bottom of the device go ahead and plug it in toMoreOkay up next is charging the charging port is at the bottom of the device go ahead and plug it in to a wall or a USB charger. Only an hour of charging is needed to give you a full day of playback.
How do I charge my BTS 06?
Charge the battery as follows: Insert the charging cable into the DC SV socket / micro USB port on the unit. Connect the USB plug into a PC or AC'DC adaptor. The LED indicator turns RED and the battery is being charged.
Can I make hands-free calls with my Headset?
The newer Headset generally have a small microphone built in which allows for calling.
What is noise cancelling?
Noise cancelling ensures that ambient noise is reduced.
When is my volume too loud?
A volume above 80 decibels can be harmful to hearing. When the volume exceeds 120 decibels, direct damage can even occur. The chance of hearing dam...
Is the manual of the SoundBot SB240 available in English?
Yes, the manual of the SoundBot SB240 is available in English .
how to connect a samsung bluetooth sound bar to a pc with a brodcom ...
it says its connected with the pc but the sound bar hasnt seen the pc to pair the devices to work how do i fix this issue have all of the drivers looked on many forms ...
Soundbar no longer auto-connecting to TV when set to Bluetooth
Hi, my Samsung Soundbar used to auto-connect to my Samsung Smart TV when using bluetooth after I turned on the TV. Recently the power went out and since then after turning on the TV, I get a message saying the soundbar has been found and asks if I would like to play audio through it.
How to connect a Soundbar to the TV using Bluetooth - Samsung uk
A Bluetooth connection does not provide the same sound quality as HDMI, but it's been loved because of its advantage of being wireless. The main challenge with Bluetooth is that the connection can be unstable due to external factors like a power outage or other electrical devices.
Manual
View the manual for the SoundBot SB240 here, for free. This manual comes under the category Headset and has been rated by 1 people with an average of a 7.8. This manual is available in the following languages: English. Do you have a question about the SoundBot SB240 or do you need help? Ask your question here
SoundBot SB240 specifications
Below you will find the product specifications and the manual specifications of the SoundBot SB240.
Frequently Asked Questions
Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the SoundBot SB240 below.
Manual
View the manual for the SoundBot SB510 here, for free. This manual comes under the category Speakers and has been rated by 2 people with an average of a 7.5. This manual is available in the following languages: English. Do you have a question about the SoundBot SB510 or do you need help? Ask your question here
Frequently Asked Questions
Below, you will find the most frequently asked questions about the SoundBot SB510.
How to pair BT remote?
Repeatedly press Source on the remote or soundbar until the soundbar's display reads BT > WAIT > BT PAIRING . If the soundbar displays BT READY , press and hold Source on the soundbar until BT PAIRING displays.
Why is my Bluetooth not working?
If the pairing is not working, it is typically because it is being performed incorrectly, or the device may need to be reset, updated, or may not be compatible with the soundbar.
What to do if your phone won't do a hard reset?
If the device does not have a method to do a hard reset, perform a soft reset instead (simply turn it off and back on again).
How to do a hard reset on a device?
Perform a hard reset on the device you're connecting. The best way to do a hard reset is to remove the battery and reinsert it , if possible. Some devices that do not have access to the battery may have a way to simulate a battery pull in order to perform the hard reset.
How to pair Bluetooth to iPhone?
Pair your device with a Bluetooth accessory 1 On your device, go to Settings > Bluetooth and turn on Bluetooth. Stay on this screen until you complete the steps to pair your accessory. 2 Place your accessory in discovery mode and wait for it to appear on your device. If you don't see it or aren't sure how to make it discoverable, check the instructions that came with your accessory or contact the manufacturer. 3 To pair, tap your accessory name when it appears onscreen. You might need to enter the PIN or passkey. If you aren't sure what your PIN or passkey is, check the documentation for your accessory.
How to make Bluetooth discoverable?
On your device, go to Settings > Bluetooth and turn on Bluetooth. Stay on this screen until you complete the steps to pair your accessory. Place your accessory in discovery mode and wait for it to appear on your device. If you don't see it or aren't sure how to make it discoverable, check the instructions that came with your accessory ...
How to unpair Bluetooth?
To unpair a Bluetooth accessory, tap Settings > Bluetooth, find the device you want to unpair, and tap the info button , then Forget this Device. This will remove the accessory from the list of available Bluetooth devices.
How to answer phone call on SoundBot?
To answer a phone call on your speaker, press the "Phone" icon along the bottom of the click wheel. However, to access the personal assistant associated with your connected media player, such as SIRI on an Apple device, you must press the "Phone" button twice to access that particular feature.
How to turn off SoundBot SB510?
You have to hold the Power button on the SoundBot SB510 speaker down for roughly three seconds in order to turn it on or off. Pressing the button quickly won't result in any action.
How to enter 0000 on SB510?
Select "SB510" in the list of devices available for you to connect to when it appears, and enter "0000" when prompted for a passcode.
Can a Bluetooth speaker interfere with a media player?
Make sure there are no objects between the Bluetooth speaker and the media player. Specifically, walls and cabinets are common sources of interference.
Can you use a SoundBot SB510 with a media player?
Even if you've already successfully paired your SoundBot SB510 speaker with a media player, there are a host of factors that can make it difficult for the two devices to communicate with each other.
Is SoundBot a shower speaker?
The SoundBot SB510 HD water-resistant, Bluetooth speaker is a serviceable shower speaker, but is truly flexible and can be used in a number of different scenarios, such as at the office, a pool party, or in the kitchen at home. The device is compatible with a wide variety of popular electronic devices, features Bluetooth 3.0 functionality, and even has a suction cup built into the back of the device. The speaker offers a fair six hours of battery life, and a healthy range of up to 40 feet.
How to pair BT remote?
Repeatedly press Source on the remote or soundbar until the soundbar's display reads BT > WAIT > BT PAIRING . If the soundbar displays BT READY , press and hold Source on the soundbar until BT PAIRING displays.
Why is my Bluetooth not working?
If the pairing is not working, it is typically because it is being performed incorrectly, or the device may need to be reset, updated, or may not be compatible with the soundbar.
What to do if your phone won't do a hard reset?
If the device does not have a method to do a hard reset, perform a soft reset instead (simply turn it off and back on again).
How to do a hard reset on a device?
Perform a hard reset on the device you're connecting. The best way to do a hard reset is to remove the battery and reinsert it , if possible. Some devices that do not have access to the battery may have a way to simulate a battery pull in order to perform the hard reset.
:max_bytes(150000):strip_icc()/002-how-to-connect-bluetooth-speaker-to-phone-4173931-c27bee2d2edc4644b9fc88ba7e5457fb.jpg)