How do I connect my Saniflo?
- Connect the Discharge Pipe. You've selected your installation site, and now it's time to install the toilet. ...
- Connect the System to Water. Next, make it possible to flush your toilet by connecting the toilet tank to your water supply. ...
- Connect the Pump to Power. ...
- Vent the Pump.
How does a Saniflo toilet work?
What’s the Difference Between Saniflo Macerating Toilet and a Typical Toilet? 1 The macerator includes a rotating blade (think of the blade in the bottom of your blender). 2 When you flush the toilet, the macerator turns on automatically, mixes the waste with flushing water, and grinds the solids into a fine slurry. 3 The slurry then moves, with the help of your quiet pump, upward through the discharge pipes, to your sewage system, septic tank or holding tank.
How long does it take to install a Saniflo system?
If you decide to hire a plumber, you’re in for a faster installation. Most plumbers can insert the Saniflo system in four hours or less.
What is the difference between a Saniflo system and a standard system?
The primary difference between a Saniflo system and a standard system is the discharge method. A Saniflo macerating system features two unique components: a macerator and a pump. Here’s how it works. The macerator includes a rotating blade (think of the blade in the bottom of your blender). When you flush the toilet, the macerator turns on ...
How to protect a toilet from freezing?
Protect Against Freezing. If you have discharge pipes that are or will ever be vulnerable to freezing, be sure to protect them with an external and approved wrap. This helps prevent pipe breakage and mess. Be sure, also, to winterize your toilet and pump if it is going into an unheated or minimally used building.
How many steps are there in Saniflo?
Four steps and – Presto! – you’ve got a brand-new Saniflo system. Wasn’t that easy?
Where does Saniflo water come from?
The water can come from a sink, kitchen on the other side of a wall, or anything similar. If you’d like, you can also connect the Saniflo system after the P-trap. This approach is ideal for anyone who has an existing sink and wants to add a toilet to it or outfit a mudroom or similar space. 3. Connect the Pump to Power.
Is Saniflo a professional plumber?
Saniflo systems are designed to cut down on the need for complex and expensive plumbing, and installing them is a pretty straightforward experience – even if you’re not a professional plumber since it's built to be a DIY project.
What is a Sanislim shower?
The Sanislim is a popular model that can handle waste from multiple appliances – including the highest output showers. The following is a step-by-step that can be followed when fitting the majority of domestic macerators. 1 Unpack the box, layout all individual items and instructions and check all items are present.
Can a Saniflo macerator be installed with a small bore pipe?
In this case, a Saniflo macerator can be installed with small bore pipework to discharge the waste to the nearest soil stack. A range of Saniflo macerators can be chosen depending on the job in hand. A typical en suite will require a unit that can take waste from a WC, a basin and a shower.
Where can I find Saniflo installers?
You can find a list of approved Saniflo installers on the Saniflo website. If you’re based anywhere in Dorset, Hampshire, Wiltshire, West Sussex or Somerset, don’t hesitate to contact Sani Solutions, approved Saniflo installers for the South of England. #3. Clean your Saniflo.
How to protect Saniflo?
Protect your Saniflo macerator by only allowing waste and toilet paper through the system. Anything else will inevitably cause a blockage, which can lead to easily avoidable repairs. Educate your household on what not to flush. For advice on what to do with a blocked toilet, visit our blog.
How to clean Saniflo toilet?
To clean your Saniflo thoroughly, follow the below steps: Turn off the power to the unit. Pour a dose of descaler into the pan. Flush the toilet. Leave for 1-2 hours. Turn on the power and let the unit pump out. Flush again. Simple and straightforward. Plus, you don’t even have to get your hands dirty.
What to do if Saniflo stops working?
Saniflo systems, while easy to install, can be tricky to fix. So, if you find that your Saniflo has stopped working, call out an expert rather than trying to diagnose the issue yourself. You may just end up making the problem worse or even cause damage to yourself or your property.
How to extend the life of a Saniflo system?
Regular maintenance can help lengthen the life of your Saniflo system. Saniflo approved contractors can arrange a visit to your property and carry out routine maintenance to ensure your system is in perfect working condition. Additionally, if a part needs replacing, Saniflo engineers will be able to fit it for you.
Can you use hot water in a Saniflo washer?
However, it’s best to avoid using hot wash cycles where possible. Similarly, if you’re using boiling or extremely hot water in your sink, let it cool before emptying it so as not to overheat the system. For advice and support on your Saniflo system, call the experts at Sani Solutions.
Who can help with Saniflo?
For advice and support on your Saniflo system, call the experts at Sani Solutions. We’ve got over 20 years of experience, plus a friendly manner and unmatched customer service. Get in touch today.
How to contact Saniflo?
If the pumps experience any issues, please contact Saniflo technical support at the direct line (732)-305-2200 or the toll free number (800) 571-8191.
How long does Saniflo last?
Saniflo products lasts about 10 to 15 years, if not longer. They have been tested for about 50,000 cycles, flushed 10 x a day = 3,650 flushes a year. As this was a standard test, it was stopped at 50,000 cycles, therefore they will last much longer.
What to do if power goes out in toilet?
In the event of a power loss, do not use the toilet or any sanitary fixture connected to the pump since it will not work until the power is restored .
What size pipe is used for a Sanicubic pump?
Depending on the pump model, the discharge pipe can be 3/4 or 1 inch diameter pipe. The Sanicubic range uses 1-1/2" diameter discharge pipe.
How many volts does a Sanicubic 2 need?
They must be plugged into a GFI receptacle which does not have to be a dedicated circuit. The Sanicubic 2 requires 220/240 volts and must be hard wired.
Do you have to break up a floor for Saniflo?
There is no need to break up the floor. Saniflo can easily be installed anywhere on any finished floor.
Do you need a P trap for a pump?
A p-trap is required on any fixtures draining into the pump. Even though macerating systems have built-in mechanical traps, most plumbing codes require a regular p-trap to be installed.
How much water does a Saniflo toilet use?
There is no a single Saniflo toilet that uses more than 1.28 gallons of water per flush. 1.28 gallons might not look like much compared to 1.6 gallons or even 3 gallons but over a period of one year, you will be surprised that you have saved thousands of gallons of water and as much in water bills.
How far can you pump waste with Saniflo Sanicompact?
If you need to install it in a basement, the Saniflo Sanicompact is able to pump waste a vertical distance of 9 feet and a horizontal distance of 120 feet. Unfortunately, the only other fixture that you can install with this toilet is a sink. Again perfect for small bathrooms.
How does a toilet flush work?
Water under high pressure from the supply line is delivered directly to the toilet bowl. When you push the flush button, a metered amount of water sufficient to flush the toilet is released into the bowl. The pressurized water flushes the bowl the same way water from a tank does, if not better.
What does a gravity flush toilet sound like?
With gravity flush toilet, the only noise you hear is the gurgling sound as the waste exits the bowl and perhaps the toilet tank refilling. Not too much of a concern.
Why does my Saniflo toilet smell?
Saniflo toilets don’t always smell but sometimes they do This is because the pump does not pump out everything so there is about 2 inches of wastewater left at the bottom of the unit. A faulty macerator can also cause the toilet to smell.
Where do you install a gravity flush toilet?
With gravity flush toilets, you must install them on a specific place in the bathroom where the drainpipe has be already pre-installed.
What are the advantages of Saniflo toilets?
The following are the advantages of Saniflo toilets: 1. Best for basement bathrooms. While looking to install a basement toilet, you want to be sure that the toilet has a powerful and reliable pump to pump the waste upwards to the sewer line or septic tank.
Can you hook a shower to a concrete floor?
Even better, a single Saniflo system makes it possible to hook a toilet, sink, and shower up to the same macerator and pump, which makes plumbing a breeze.
Can you install a shower with an up flush system?
It sounds counterintuitive, but it is possible to install a shower in conjun ction with an up-flush system. The key here, though, is that the concrete cannot be removed because of this type of setup; instead, you will have one continuous flow from your sewage holding tank and into the main sewer line.
