how do i connect my smart pen to my computer

Select Start > Settings > Bluetooth & devices > Pen & Windows Ink. Note: If you need to pair your pen with your PC first, select Start > Settings > Bluetooth & devices, then select add a device. Make sure your pen is in pairing mode, select it from the list, then select Pair.

Full Answer

How do I connect a pen to my surface?

How to Connect a Pen to Surface 1 Go to Start > Settings > Devices > Add Bluetooth or other device > Bluetooth . 2 Press and hold the top button of your pen for 5-7 seconds until the LED flashes white to turn on Bluetooth pairing mode. 3 Select your pen to pair it to your Surface. See More....

How do I connect my pen to my Bluetooth® device?

2 Insert the AAAA pen battery. + - 3 Turn on the pen by tapping the tip to any surface. 4 Press and hold the A button for 5 seconds to enable Bluetooth® pairing. When the pen is ready to be paired with a device, the Bluetooth light D slowly flashes blue.

How do I Turn On my HP active pen?

If that's the HP active pen: Click here 1 Turn on your tablet. 2 Insert the AAAA pen battery. + - 3 Turn on the pen by tapping the tip to any surface.

How do I use the pen on my keyboard?

To learn how to use it, go to Get to know the touch keyboard. Your pen can be used throughout Windows, similar to how you would use a mouse or keyboard. Here are some actions you can start with. Tap on an item. Press and hold the side button, then tap on the item.

How do I connect my smart pen to my laptop?

Here's how:Select Start > Settings > Bluetooth & devices > Add device > Bluetooth.Press and hold the top button of your pen for 5-7 seconds until the LED flashes white to turn on Bluetooth pairing mode.Select your pen to pair it to your Surface.

How do I connect my smart pen?

1:334:14Smartpen: Livescribe Symphony Tutorial - YouTubeYouTubeStart of suggested clipEnd of suggested clipDevice take the cap off the pen. And it's powered. On on the first page of your sample notebookMoreDevice take the cap off the pen. And it's powered. On on the first page of your sample notebook gently tap device pairing until your pen blinks.

How do you turn on a Livescribe pen?

TO TURN ON THE PEN, press the tip against any surface that is not the Livescribe Dot Paper. With the tip pressed down, wait for the LED to turn green and release the tip. TO TURN OFF THE PEN, make sure the smartpen is not paired with any device and stop using it. The pen will go to sleep after 40 seconds of inactivity.

How do I transfer notes from Livescribe pen?

0:021:30Livescribe Desktop Software - How to Upload Smartpen Notes ... - YouTubeYouTubeStart of suggested clipEnd of suggested clipThe way you download excuse me upload your notes is simply put your pen on the cradle that'sMoreThe way you download excuse me upload your notes is simply put your pen on the cradle that's connected to your computer.

How do I connect my smart pen to my tablet?

The Pen connects to the tablet via Bluetooth and requires pairing only once - just attach it on the side and click a button. It has an integrated battery and recharges wirelessly at its spot on the side of the Pad 5.

How do smart pens work?

How does it work? There's an infrared camera at the tip of the pen that records what you write. Using special paper that employs a dot positioning system, the pattern of uniquely printed microdots are what allows the camera to follow and record the strokes of your writing.

How do I connect my Livescribe pen to my laptop?

1) Make sure your smartpen is in Pairing Mode with a blinking green LED. If the LED is not blinking green, tap on the Device Pairing icon inside your notebook cover to put your smartpen in pairing mode. 2) Open the Livescribe+ app, it should say "New Smartpen Found," and ask to pair with your smartpen.

How do I pair livescribe?

Start Livescribe+ (for Android, Livescribe Link does not need to be restarted). If you don't see a Livescribe+ prompt to Pair, turn the pen off and then back on, shut down the app and start it again. If still no prompt, tap the menu icon in the upper left of Livescribe+, scroll down and tap "Connect to Smartpen".

How do I pair my Livescribe Symphony?

Connect Symphony with a new device Open the free Livescribe+ mobile app on your phone or tablet. When the pen LED is blinking blue, the Livescribe+ app will automatically detect your smartpen. Pair and Accept Pairing request when prompted.

Can you convert Livescribe to text?

You can use MyScript® for Livescribe to convert your handwritten notes to digital text.

How do I download Livescribe?

Installing Livescribe Desktop for the First TimeVerify that your computer meets the software and hardware requirements for Livescribe Desktop.Download the Livescribe Desktop installer from www.live-scribe.com/install.Open the installer and follow the on-screen instructions to complete the installation.

Can Livescribe pen convert audio to text?

Once you've tapped the record button, any audio captured by the microphone automatically syncs to what you are writing or drawing. Your smartpen records your handwriting by default. All you have to do is turn on your smartpen and start writing on Livescribe dot paper (any Livescribe branded paper products).

How to use a pen on a laptop?

Here are some actions you can start with. If you want to. Do this with your pen. Click or select. Tap on an item. Right-click. Press and hold the side button, then tap on the item.

How to connect a pen to a surface?

Here's how: Go to Start > Settings > Devices > Add Bluetooth or other device > Bluetooth . Press and hold the top button of your pen for 5-7 seconds until the LED flashes white to turn on Bluetooth pairing mode. Select your pen to pair it to your Surface.

How to change pen shortcuts?

To change these shortcuts, go to Start > Settings > Devices > Pen & Windows Ink . If you want to. Do this with your pen. Open Microsoft Whiteboard. Click the top button once. Open Snip & Sketch. Double-click the top button. Open Sticky Notes. Press and hold the top button.

How to drag and drop in a pen?

Drag and drop. Place your pen on an item, and hold it there until the circle around the pointer completes. Then move the item to where you want it to go. Select multiple items. Presss and hold the side button, then drag your pen over the items you want to select.

How to check battery level on a pen?

Check battery level. If you want to see how much battery you have left, go to Start > Settings > Devices > Bluetooth & other devices , then find your pen. The current battery level will appear under the battery icon.

How to write on a surface?

Start inking with your pen. Rest your hand on the screen, like you would on a piece of paper, then start writing. Your Surface is designed to ignore your hand and other inputs while you write. Use the pointer that appears under your pen tip to guide you while you ink.

How to pair a pen to a computer?

How to Pair Microsoft Surface Pen 1 Put Surface Pen in Pairing Mode#N#To put a Surface Pen in pairing mode (enable Bluetooth discoverable mode)#N#Press and hold the tail eraser button for 5-7 seconds.#N#The white LED light will flash while in pairing mode. Now you can continue the pairing process on your computer. 2 Open Windows Settings#N#First, you need to access Windows Settings by going to Start and click the Gear icon (or by using Win + I shortcut key). 3 Go to Devices#N#In Windows Settings, select “ Devices “. 4 Select “Add Bluetooth or other devices”#N#Inside the “Bluetooth & other devices” page, click on the “+ Add Bluetooth or other devices”.#N#Important Make sure the Bluetooth is turned on your Surface by switching the Bluetooth toggle to on as in the picture above. 5 Select “Bluetooth”#N#Choose the first option with “Bluetooth” to connect to any Bluetooth devices including the Microsoft Surface Pen. 6 Select “Surface Pen”#N#It will take several seconds to discover the Surface Pen Bluetooth signal. Select the Surface Pen when it appear on the the list. 7 Click “Done”#N#After the pairing process is done, click Done to close the window.

How to connect a Surface Pen to a PC?

There a few approaches to pair or connect Surface Pen to your PC and here is the most straightforward way to do that. Put Surface Pen in Pairing Mode. To put a Surface Pen in pairing mode (enable Bluetooth discoverable mode) Press and hold the tail eraser button for 5-7 seconds.

How to connect a Surface Pen to a Bluetooth device?

Choose the first option with “Bluetooth” to connect to any Bluetooth devices including the Microsoft Surface Pen. Select “Surface Pen”. It will take several seconds to discover the Surface Pen Bluetooth signal. Select the Surface Pen when it appear on the the list. Click “Done”. After the pairing process is done, click Done to close the window.

How to add Bluetooth to laptop?

First, you need to access Windows Settings by going to Start and click the Gear icon (or by using Win + I shortcut key). In Windows Settings, select “ Devices “. Inside the “Bluetooth & other devices” page, click on the “+ Add Bluetooth or other devices”.

Can you use a Surface Pen on a laptop?

However, pairing the Surface Pen with your laptop or tablet lets you access more Surface Pen information and functionalities.

How to access pen settings?

To access pen settings, open the Settings app and select Devices > Pen & Windows Ink. The “Choose which hand you write with” setting controls where menus appear when you use the pen. For example, if you open a context menu while it’s set to “Right Hand”, it will appear to the left of the pen tip. If you open a context menu while it’s set ...

Where is the eraser button on a pen?

Many pens—but not all pens—have a shortcut button. For example, on the Surface Pen, you’ll find the shortcut button on the tip of the pen, where an eraser would be on a pencil. The options at the bottom of the panel allow you to control when you click the button once, double-click it, or press and hold it.

How to open Windows Ink Workspace?

By default, you can open it by pressing a shortcut button on your pen—if your pen has one—or clicking the pen-shaped Windows Ink icon in the notification area. If you don’t see the button, right-click the Windows taskbar and select “Show Windows Ink Workspace button”. Advertisement.

How to screenshot on OneNote?

The press and hold feature only works on some pens. By default, clicking the button once will open the universal OneNote app, double-clicking will send a screenshot to the universal OneNote app, and pressing and holding will open Cortana.

Where is the left hand option in Windows 10?

Windows tries to avoid opening context menus behind your hand, where you can’t see them. By default, Windows 10 assumes you’re right handed. If you’re left handed, you’ll want to select the Left Handed option under “Choose which hand you write ...

Does Windows 10 have a pen?

Windows 10 gained a new pen settings panel with the Anniversary Update. If your device has a pen or another type of stylus, you can customize exactly how it works and what its buttons do from the Settings window. This previously required device-specific apps like the Microsoft Surface app for configuring the Surface Pen on Surface devices.

Can you adjust the pressure on a Surface Pen?

The Microsoft Surface app still allows you to adjust a Surface Pen’s pressure sensitivity , and other device-specific tools may still have additional settings. But most common options are now built into Windows.

What can a digital pen do?

A digital pen that can do it all. Take notes, navigate, draw, doodle, and edit. Discover all the ways you can be productive and get creative with a digital pen. 1. Woman using a digital pen on her Windows 10 device.

Is Windows 10 compatible with a pen?

And Windows 10 is compatible with a range of pens that offer a variety of features.

How to connect Bamboo Ink to Windows 10?

Step 4: Pair your stylus with your device. On your Windows 10 desktop, click on Start, select Settings, go to Devices, choose Bluetooth, and turn it on. Now take your Bamboo Ink, hold down the top button for about six seconds – until the LED starts to flash. Choose Bamboo Ink from the list of discovered devices and select Pair.

How to check if Bamboo Ink is compatible with Windows?

Step 1: Check your Windows device. To check if your Windows device is compatible with Bamboo Ink, see the list of tested devices on this page. Some devices require a driver update. To check if your device is one of these, see the below list. If your device is not listed, please continue with step 2.

Does Bamboo Ink work on Windows?

Your Bamboo Ink supports two compatibility modes. The mode needs to match the mode of your Windows device. If the stylus does not work on your device, you can easily switch the mode.

How to pair Bamboo Ink to Windows 10?

On your Windows 10 desktop, click on Start, select Settings, go to Devices, choose Bluetooth, and turn it on. 2. Now take your Bamboo Ink, hold down the top button for about six seconds – until the LED starts to flash. 3. Choose Bamboo Ink from the list of discovered devices and select Pair.

How to switch between protocols on a stylus?

If the stylus does not work on your device, you can easily switch the mode. Press and hold both side-switches at the same time for two seconds to switch between protocols. Repeat to return to the previous protocol.

How to check if Bamboo Ink is compatible with Windows?

Step 1: Check your Windows device. To check if your Windows device is compatible with Bamboo Ink, see the list of tested devices on this page. Some devices require a driver update. To check if your device is one of these, see the below list. If your device is not listed, please continue with step 2.

How to unlock Bamboo Ink?

Twist the top end of your Bamboo Ink to unlock it. Open it to insert the battery as indicated, then close and twist the top end to lock it. Your Bamboo Ink supports two compatibility modes. The mode needs to match the mode of your Windows device.