Remove the metal clip from the top of the faucet by pulling the clip away with pliers. Pull the faucet out of the faucet housing. Turn the water off at the two shut-off valves below the sink. Remove the screw from the middle of each faucet handle with a screwdriver. Lift the handles off the faucets. Remove a corroded handle with a handle puller.
How do I take my faucet apart?
0:052:51How to Remove a Faucet Cartridge - YouTubeYouTubeStart of suggested clipEnd of suggested clipIn this case they're hidden beneath these decorative caps which can be pried off with a knife. OnceMoreIn this case they're hidden beneath these decorative caps which can be pried off with a knife. Once the screws are exposed. They can be removed with the screwdriver. By turning them counterclockwise.
How do you take apart a faucet stem?
0:455:29Faucet stem repair and replacement - YouTubeYouTubeStart of suggested clipEnd of suggested clipIf you have a brass stem you'll need to remove this by using a wrench and rotating it in the onMoreIf you have a brass stem you'll need to remove this by using a wrench and rotating it in the on direction until it threads out entirely. If you have a plastic stem.
How do you take apart a single hole faucet?
0:182:44Repairing a Leaky Single Handle Ball-Type Faucet - YouTubeYouTubeStart of suggested clipEnd of suggested clipThis may require using an Allen wrench to loosen the handle. There may be a button that covers theMoreThis may require using an Allen wrench to loosen the handle. There may be a button that covers the screw that needs to be removed first and then you can loosen the screw and remove the lever handle.
How do you take apart a two handle faucet?
1:084:49How to Repair a Leaky Two-Handle Faucet - YouTubeYouTubeStart of suggested clipEnd of suggested clipYou will need to remove it by using a wrench to rotate it in the off direction until it threads outMoreYou will need to remove it by using a wrench to rotate it in the off direction until it threads out entirely. Once removed you'll need to take your stem to your local retailer.
What is the difference between a faucet stem and cartridge?
The Difference Between Stem & Cartridge A stem is used in two-handle faucets, where one handle is responsible for cold water and the other is responsible for hot water. A cartridge is used in faucets to control hot and cold water through just one handle. It can be repaired quite easily.
Can't get stem out of faucet?
0:145:44How to remove a stuck cartridge or stem from any brand faucet!YouTubeStart of suggested clipEnd of suggested clipAnd you can still do that if you don't have the nip X or can also use a crescent wrench. But aMoreAnd you can still do that if you don't have the nip X or can also use a crescent wrench. But a really large pipe wrench also works really well in this situation.
How do you take apart a single handle bathroom faucet?
0:572:32How to Repair a Leaky Lavatory Faucet - YouTubeYouTubeStart of suggested clipEnd of suggested clipYou may need a small flat-head screwdriver to pry the cap off using a Phillips head screwdriverMoreYou may need a small flat-head screwdriver to pry the cap off using a Phillips head screwdriver remove the handle screw gently pull on the handle. And remove.
How do you take apart a bathroom faucet?
Turn the water off at the two shut-off valves below the sink.Remove the screw from the middle of the faucet handle with a screwdriver. Lift the handle off the faucet.Remove the metal clip from the top of the faucet by pulling the clip away with pliers.Pull the faucet out of the faucet housing.
How do you take a Delta single handle kitchen faucet apart?
1:078:56Delta Kitchen Faucet Leak Repair (Single Handle) - YouTubeYouTubeStart of suggested clipEnd of suggested clipThis is a double check to make sure that your water is off use a 1 8 inch hex head wrench to removeMoreThis is a double check to make sure that your water is off use a 1 8 inch hex head wrench to remove the set screw in the handle. Put the set screw in a parts pole to ensure that you will not lose.
What are the different types of faucet handles?
There are almost three types of faucet handles: lever handles, blade handles and cross handles. The type of handle that a faucet can accommodate is somewhat dependent on the type of faucet itself.
How do you remove a screwless faucet handle?
Once you find the necessary tools, you'll need to follow these steps to remove the screwless faucet handle successfully.Step 1: Turn off the water. ... Step 2: Remove the cap on top of your faucet. ... Step 3: Remove the hidden set crew. ... Step 4: Remove the faucet handle. ... Step 5: Rinse off mineral deposits.
How do you remove a spindle tap handle?
0:092:19Tap Magician Removing different types of tap handles ... - YouTubeYouTubeStart of suggested clipEnd of suggested clipThis is done this is held in place by a two-meal allen key which is located opposite the directionMoreThis is done this is held in place by a two-meal allen key which is located opposite the direction of the handle. Remove or loosen the grub screw turning it anti-clockwise.
How do you remove an old bathtub faucet stem?
Remove it with a special bath socket wrench, which looks like a spark plug wrench on steroids. Slide the bath socket onto the stem bonnet and turn it counterclockwise to break the stem loose. If it sticks, soak it with penetrating lubricant. Unscrew and remove the stem.
How do you remove a stem from a Moen faucet?
0:232:05How to remove and install the Moen 1224 Cartridge - YouTubeYouTubeStart of suggested clipEnd of suggested clipStep 2 remove the trim and the 1224 cartridge unthread the set screw to detach the handle. RemoveMoreStep 2 remove the trim and the 1224 cartridge unthread the set screw to detach the handle. Remove the cartridge nut. Pull out the cartridge.
How do you remove a shower faucet stem?
1:157:15How to Repair a Shower Valve Stem | Ask This Old House - YouTubeYouTubeStart of suggested clipEnd of suggested clipOn these anytime you look at these handles you realize they have to be attached somehow to get atMoreOn these anytime you look at these handles you realize they have to be attached somehow to get at the screw you have to pry off the index from the end.
How do you remove a stem from a hose bib?
As I recall, you would follow this procedure...Turn off the water, so no pressure is found at the valve itself.Remove the handle, by unscrewing the small screw in the center. ... Remove the small nut around the stem.Put the handle back on. ... If the stem will not pull out, you need to pull out the packing around the stem.More items...•
How to remove cartridge from faucet?
Like others, you first have to open the decorative cap of the cartridge faucet because it will allow you to remove the handle. Then take pliers to remove the retaining clip which is circular in shape. After you have eliminated the clip, you can now easily take out the cartridge. Lastly, take out the o-ring using a utility knife, which will be the final step for complete disassembly.
How to disassemble a compression faucet?
First, you need carefully take out the cap on the top which will provide the way for the screw. Then unscrew the join using a screwdriver, and it will allow you to pull up the handle.
Do you need to follow the manual when disassembling a faucet?
Note: It would be a smart move to follow manual while disassembling as it will prevent any unwanted damage. The manufacturers of faucets will supply the manual when you
Do you take out the seals on a faucet?
It would be best to take out the seals and springs before taking out the o-ring that forms as the base. Now depending upon the model, you should take out the o-ring as well as the base to completely disassemble the faucet.
Do we earn commissions when you buy through links?
We may earn a commission when you buy through links on our site.
What is a cartridge faucet?
Cartridge Faucet. Cartridge faucets have a hollow metal or plastic cartridge insert that seals against the spout or faucet body. Depending on how a series of holes in the cartridge align with the stem, water is mixed and controlled. Drips usually mean the cartridge needs replacing.
What is a ball faucet?
Ball-Style Faucet. Ball faucets have a single lever that operates a rotating, slotted metal ball. The slots in this ball align with hot and cold water inlet seats in the faucet body to regulate the amount of incoming water allowed to reach the mixing spout. Delta is one of the primary manufacturers of this faucet type.
How to change water temperature on a water cartridge?
Water flow is controlled by an up-and-down movement of the cartridge; to change water temperature, you just rotate the handle. Remove the decorative can and screw and pull off the handle. To release the cartridge, use a pair of pliers to pull the retainer clip straight out.
What is the problem with a compression faucet?
The fundamental problem with a compression faucet is that the rubber washer or seal wears out over time. When this happens, the tap drips or drools. Some newer types of compression faucets lower and raise the washer without grinding it into the valve seat.
Why should the handle be on when repairing a disc faucet?
The handle should be in the “on” position when repairing a disc faucet to prevent cracking the replacement seals.
How to turn off water to faucet?
Turn off water to the faucet by turning the valve under the sink clockwise. LightWaveMedia / Shutterstock.com. Place a towel in the sink to prevent scratches and to catch any dropped parts. Then remove the handle. To do this, use a small, flat screwdriver to pry up the decorative cap, button, or plug at the top of the handle, used to hide a screw.
What is compression style faucet?
Compression-Style Faucet. Among the various faucet tap technologies in use, compression-style faucets have been around the longest. They are also the least expensive type. Compression faucets have two separate handles.
How to remove rotary ball from a golf ball?
Turn the screw counterclockwise until the handle comes off, using an Allen wrench or screwdriver. Remove the large, chrome cap underneath, using pliers or an adjustable wrench. Take off the nylon cam and the plastic packing rings that cover the top of the ball. Remove the rotary ball that is now exposed.
Why do single lever faucets leak?
A single-lever faucet gets a lot of use because the lever is continually moved to change the water from hot to cold. After awhile, the parts break down and you may get a leak from the base or a drip from the spout.
When did Jill Davis start writing?
Jill Davis started writing professionally in 2006. She has had articles published in "Yogi Times" and "Orange Pealings" magazines. Davis received a Bachelor of Arts in journalism from California State University, Long Beach.
