- Shut off the pump.
- Go to the back of the filter and unscrew the drain plug.
- Turn the pump back on and let the water run until it reaches the point where you want to drain the water out.
- Turn the pump back off and put the plug back into the drain plug.
How do you drain an Intex pool?
The fastest method to drain an Intex pool is by using a submersible pump that will suck the water out of your pool. The electric pumps will cost you a little money, but they will save you a lot of time when you need it. If you don’t have access to an electric pump, you can also drain the pool with a hand pump.
How do you drain a pool with a pump?
How to Drain Water from Your Swimming Pool. 1 Shut off the pump. 2 Go to the back of the filter and unscrew the drain plug. 3 Turn the pump back on and let the water run until it reaches the point where you want to drain the water out. 4 Turn the pump back off and put the plug back into the drain plug.
How do you drain a pool with a multiport valve?
Turn the pump back on. After you get the correct amount of water out of your swimming pool, turn the pump back off. Rotate the multiport valve from the "Waste" position, in a clockwise direction, back to "Filter." Pick the backwash hose up to help drain all the water out and roll it back up.
How to drain a pool with a cartridge filter?
How to Drain A Pool with a Cartridge Filter. For those pools that have a cartridge filter, there are two ways to achieve this. 1. Using the Drain Plug. Shut off the pump. Go to the back of the filter and unscrew the drain plug. Turn the pump back on and let the water run until it reaches the point where you want to drain the water out.
How Do I Drain the Last 100 Gallons From My Intex Pool?
How many steps to drain Intex pool?
How to use talc in Intex pool?
How to stop water from coming out of Intex pool?
How to store Intex pool for winter?
Where is the drain valve on a pool?
Can you drain an Intex pool?
See 2 more
Where is the drain plug on a Intex pool?
The drain valve is located on the outside of the pool. Run a garden hose out, with the female end near the drain valve. Connect the other end to a sprinkler, and water your lawn or garden (if pH is good and chlorine low). Remove the cap.
How do I drain my Intex pool filter?
0:521:50How to DRAIN Your Intex EasySet Pool - YouTubeYouTubeStart of suggested clipEnd of suggested clipPull 18 by 48 pull like I have I usually just hook one up and it drains pretty quick thanks forMorePull 18 by 48 pull like I have I usually just hook one up and it drains pretty quick thanks for watching and check out easy set pool care com for more tips.
How do I drain the water from my pool pump?
Shut off the pump. Go to the back of the filter and unscrew the drain plug. Turn the pump back on and let the water run until it reaches the point where you want to drain the water out. Turn the pump back off and put the plug back into the drain plug.
Where is the drain plug on a pool pump?
0:041:18How to Replace the Drain Plugs in a Pool Filter : Pool Tips & CareYouTubeStart of suggested clipEnd of suggested clipThere is on the back of your filter you will find a plug that will look similar to this.MoreThere is on the back of your filter you will find a plug that will look similar to this.
How do you drain an above ground pool pump?
All you need is a medium-size water or vacuum pump. Unroll the pump's intake hose so that it reaches the center of the pool (or as close to it as possible), and submerge it in the pool. Place the outlet hose so the exiting water doesn't flood the area, but drains off away from the pool. Dry your hands thoroughly.
How do I drain my Intex above ground pool with a pump?
2:0210:12HOW TO DRAIN AND REFILL YOUR INTEX EASY SET 10' x 30” POOLYouTubeStart of suggested clipEnd of suggested clipOnce you push it in there it's going to push that plug that i just showed you on the inside is goingMoreOnce you push it in there it's going to push that plug that i just showed you on the inside is going to push. It out so it'll start draining. Okay you have to hurry up and screw it.
Where is the main drain valve on a pool?
The pool main drain valve will be in the pipework on the suction side of your pool pump. To find which it is, follow the pipework from the pump backward. You will probably come to a junction where two, three or more pipes join into one before going to the pump.
How do you siphon water out of a pool with a hose?
0:443:18How to quickly get a siphon going to remove water from your pool cover ...YouTubeStart of suggested clipEnd of suggested clipAnd we're gonna kind of just put a couple threads on little ho spigot. And then we're gonna turn theMoreAnd we're gonna kind of just put a couple threads on little ho spigot. And then we're gonna turn the hose on. Until water begins to flow out this end. We're gonna keep this end up in the air above.
How do I clean my Intex pool after draining?
How to clean your above ground pool after drainingDrain the pool water.Pick out/scoop any dirt and debris left behind.Use a specialized pool cleaning solution or use some chlorine dissolved in water to scrub down all of the surfaces of your pool.More items...•
What is the plug on the side of my pool?
They are called hydrostatic relief plugs or hydrostats, for short. Hydrostat plugs are usually plastered in place, but beneath the plaster, they thread into a piece of slotted pipe that runs through the floor of the pool. Below the floor, this pipe terminates into a gravel pit beneath the pool.
What kind of plug is on a pool pump?
Typically, these pumps come only in the 120-volt variety and usually have a three-prong plug as their connection method.
How many drain plugs pool pump?
twoEach piece of equipment usually has a drain plug of some kind. Most pool pumps have two, one in the front of the pump pot and one in the back section section before the motor. The plugs will be toward the bottom of the pump.
How do I drain my Intex pool without a pump?
How do I drain my above ground pool without a pump? You can drain your above ground swimming pool using a regular garden hose and creating a siphon. It will just take much longer than using a sump pump and the siphon will start to slow down as your pool's water level gets low.
How do I drain my Intex pool hose?
Set up your garden hose to an area where you want the drained pool water to go. Connect your hose adapter to your garden hose and then connect this to your drain valve to start draining your pool water. Remove the cap in your Intex framed pool set. This is on the bottom inside your Intex pool.
How do you drain a pool without an adapter?
0:221:05How to Drain a Bestway/Intex Without Garden Hose Adapter - YouTubeYouTubeStart of suggested clipEnd of suggested clipSo now both of these hoses running draining the pool. And then I figure once the pool runs out ofMoreSo now both of these hoses running draining the pool. And then I figure once the pool runs out of most of the water. I can lift the pool towards these holes and drain it that.
How do you siphon water out of a pool?
0:443:18How to quickly get a siphon going to remove water from your pool cover ...YouTubeStart of suggested clipEnd of suggested clipAnd we're gonna kind of just put a couple threads on little ho spigot. And then we're gonna turn theMoreAnd we're gonna kind of just put a couple threads on little ho spigot. And then we're gonna turn the hose on. Until water begins to flow out this end. We're gonna keep this end up in the air above.
How long does it take for a pool to drain?
On average, the drain alone can take between 8 and 14 hours. This, of course, depends on your pool size and drain rate produced by your pump.
When Should You Drain A Swimming Pool?
Draining a pool should always be a last resort, so be absolutely certain you’ve exhausted all avenues when it comes to water balancing or repairing broken areas of the pool.
Why drain a pool with green water?
Issues like green pool water, high levels of calcium or cyanuric acid in the pool may require a partial drain to dilute the water. This isn’t half as labor intensive or costly as a full drain. Additionally, you may still be able to rectify some of these water issues through the addition of certain chemicals.
How to reduce pool fill time?
Using a hose connected to a backyard spigot, lay it into the pool and turn on the water. If you can use more than one spigot and hose simultaneously, you’ll significantly reduce your fill time.
Why do pool lights shatter?
Pool lights will shatter if they’re left on when water isn’t present, and the pump can take on air which will damage it.
When is the best time to drain a pool?
The best time to do a drain is in weather under 85°F, and if possible, during the cooler months. The end of pool season (September/October) is popular for this reason.
Do you have to pay to drain a pool?
Understand that the price of doing a pool drain is considerable. Not only do you have to pay to run a pump that empties the pool, but you also have to shell out for the water that’s required to fill it back up.
How to drain pool water out of cartridge filter?
1. Using the Drain Plug. Shut off the pump. Go to the back of the filter and unscrew the drain plug. Turn the pump back on and let the water run until it reaches the point where you want to drain the water out.
Where to shut off pump?
Manually shut the pump off at the breaker box.
How to rotate multiport valve?
Rotate the handle on the multiport valve in a clockwise direction until you get back to "Filter."
How to get water out of a filter?
Shut the pump off and rotate the valve so that it block s the water going to the filter. Turn the pump on and the water will come out of the opening. When you get to the point where you've taken out enough water, turn the pump off and turn the 3-way valve back to the regular position.
Why drain water during a hurricane?
If you know that a large tropical storm or hurricane is approaching, you may also want to drain some water to prevent overflow.
Where to roll backwash hose?
Roll backwash hose out into the yard or approved draining area.
Can you drain a pool with TDS?
In cases where your water has a high level of Total Dissolved Solids (TDS), a Pinch A Penny expert may recommend that you drain some water from your pool and add fresh water. If you know that a large tropical storm or hurricane is approaching, you may also want to drain some water to prevent overflow.
How Do I Drain the Last 100 Gallons From My Intex Pool?
Before you do this, however, deflate the top ring on Easy Set™ or disassemble the frame pieces for Frame Set™ pools.
How many steps to drain Intex pool?
That’s our super-simple six-step system for draining your Intex Frame-Set ™ or Easy-Set ™ pool. Take the time to do it right and you’ll enjoy many more years of fun with your Intex Pool.
How to use talc in Intex pool?
As a final step, using Talc or DE powder can help to absorb trace moisture. Screw your pool drain cap back onto the drain valve, so it won’t get misplaced . Fold your Intex pool for storage, fold the wall part of the material in on all sides, then with two people, pull one side of the pool over to meet the other side.
How to stop water from coming out of Intex pool?
On some Intex pools, you may need to screw a Hose Adapter on to the female garden hose end and then thread the hose adapter into the drain valve. This will prevent the water from coming out immediately when you remove the drain cap.
How to store Intex pool for winter?
How to Dismantle and Store your Intex Pool for Winter. Check your pool chemistry levels to be sure that you are not draining water that may contain very low pH or very high chlorine levels. Think about where you will drain the pool to – be aware of any laws regarding discharge of pool water. Locate the drain valve on the outside of the pool.
Where is the drain valve on a pool?
The drain valve is located on the outside of the pool . Run a garden hose out, with the female end near the drain valve. Connect the other end to a sprinkler, and water your lawn or garden (if pH is good and chlorine low). Remove the cap.
Can you drain an Intex pool?
It’s always best to drain or pump out an Intex pool slowly. With the Easy Set pools, you may be tempted to deflate the top ring, and just sort of roll the water out. This can be dangerous! Not just to nearby plants or mulch beds, but the pool can rip or develop holes during the process.
