- Solution 1: Make sure the refill hose is inserted as far as possible into the flush valve. ...
- Solution 2: If you have a KOHLER toilet with a canister valve, check the color of the canister cap. ...
- Solution 3: Order chain assembly K-1219268. ...
- Solution 4: Partially close the water supply stop to slow the refill rate, which will reduce splashing. ...
Full Answer
How do you replace a Kohler toilet?
Install a Toilet Trip Lever
- Begin by unclipping the flapper/canister chain from the end of the trip arm inside the toilet tank (Fig. ...
- Remove the mounting nut on the back of the trip lever by rotating it counterclockwise (Fig. ...
- Gently pull the trip lever forward from the tank and tilt it so that the arm will be positioned to slide out (Fig. ...
How to troubleshoot a Kohler toilet?
- Solution 2: If you have a KOHLER toilet with a canister valve, check the color of the canister cap. ...
- Solution 3: Order chain assembly K-1219268. ...
- Solution 4: Partially close the water supply stop to slow the refill rate, which will reduce splashing. ...
- Solution: Wipe the Touchless Module and underside of the tank lid dry. ...
How do you troubleshoot Kohler toilets?
Touchless Flush Toilet - Troubleshooting
- Troubleshooting Topics
- Random/Ghost/Phantom Flushing. ...
- Actuator Wheel Does Not Fully Rotate. ...
- Repeated Flushing After User Actuation. ...
- Touchless Module Activates Early. ...
- Sensor Does Not Actuate Touchless Flush. ...
- Determining If You Need a New Module Box. ...
How to remove and replace a Kohler toilet flush valve?
Flush Out a Fill Valve on a Two-piece Toilet Turn off the water supply to the toilet. Remove the float valve cap assembly by rotating it 1/4 run counterclockwise. Remove the rubber seal (diaphragm) from the cap and rinse it under running water to clear debris that may have collected. Inspect the rubber seal for damage (tears, holes, etc.)
How do you fix a Kohler toilet that won't flush?
Corrective Actions:Partially close the water supply shut-off valve.Check the fill valve for debris, and clean as needed.Make sure the rim feed hose (if equipped) is connected to the overflow and fill valve.Replace the fill valve with a genuine KOHLER fill valve for optimal performance.
Why is my Kohler toilet bowl not filling up with water?
To correct low water level in your toilet bowl, ensure the rim feed hose in the toilet tank is connected to the flush valve. The rim feed hose directs water into the toilet bowl when the tank is refilling. If it is not installed into the flush valve, the water level in the toilet bowl will be low.
How do you fix a low flow toilet that keeps running?
To lower the water in a toilet with a float arm, loosen or tighten the screw until the float arm lowers. To lower the water in a toilet with a column float attached to the fill valve, loosen the screw or clip, push down the float, and tighten everything back up again.
How do you adjust the fill valve on a Kohler toilet?
Squeeze the Float Valve Adjustment Clip (metal C-shaped clip) on the float valve and slide it up or down the float rod to adjust the water to the desired level. A pair of pliers may assist in squeezing the clip. 2. Flush the toilet to verify the water level is at the marked water line in the tank.
Why is there no water coming into my toilet tank?
Low Water in Toilet Bowl The toilet tank fill tube may be damaged or incorrectly positioned, preventing the water level from reaching its proper level. Position the fill tube so water is flowing into the overflow tube (the open pipe near the center of the tank). If this doesn't fix the problem, replace the fill tube.
Why won't my toilet fill with water after flushing?
When a toilet is not filling up with water it is a sign of a faulty fill valve, wrong height of the toilet float, a leaking flapper, cracked overflow tube or low water pressure.”
Why does my toilet keep running on and off?
A toilet that cuts on and off by itself, or runs intermittently, has a problem that plumbers call a "phantom flush." The cause is a very slow leak from the tank into the bowl. This problem is almost certainly caused by a bad flapper or flapper seat.
How do I fix my Kohler fill valve?
0:441:55How to Flush the Fill Valve on KOHLER Two-Piece ToiletsYouTubeStart of suggested clipEnd of suggested clipTurn off the water supply and reinstall the seal into the cap assembly with the nipple facing upwardMoreTurn off the water supply and reinstall the seal into the cap assembly with the nipple facing upward then replace the cap assembly. Do. This by rotating it one-quarter turn clockwise.
How does Kohler fill valve work?
As soon as the water level in the tank begins to drop, a float mounted on the fill valve begins to travel downward. This downward travel activates the fill valve and initiates the refilling of the tank and the bowl with fresh water. As the tank refills, the float begins to rise with the incoming water.
How do you take apart a toilet fill valve?
0:001:23Toilet Repair Tips : How to Fix the Refill Valve for a Toilet TankYouTubeStart of suggested clipEnd of suggested clipOne you'll want to turn the water off flush. The toilet. This one has a little arm that comes up andMoreOne you'll want to turn the water off flush. The toilet. This one has a little arm that comes up and the top will pop. Off.
How do you clean a Kohler toilet fill valve?
Flush Out a Fill Valve on a Two-piece ToiletTurn off the water supply to the toilet.Remove the float valve cap assembly by rotating it 1/4 run counterclockwise. ... Remove the rubber seal (diaphragm) from the cap and rinse it under running water to clear debris that may have collected.More items...
How does a Kohler toilet fill valve work?
As soon as the water level in the tank begins to drop, a float mounted on the fill valve begins to travel downward. This downward travel activates the fill valve and initiates the refilling of the tank and the bowl with fresh water. As the tank refills, the float begins to rise with the incoming water.
How do you fix a Kohler dual flush toilet?
1:202:19Fix for Kohler duel flush toilet running - YouTubeYouTubeStart of suggested clipEnd of suggested clipBecause that bubbling that's happening around the edge of the washer. So we're going to need a newMoreBecause that bubbling that's happening around the edge of the washer. So we're going to need a new one. And snap it back in and we're good. All right so i got a new washer in the groove. There.
How does a Kohler canister flush valve work?
0:371:26AquaPiston Canister Flush Valve - Kohler Toilets - YouTubeYouTubeStart of suggested clipEnd of suggested clipOver the edge of a waterfall aqua piston sends water rushing into the system from a full 360 degreesMoreOver the edge of a waterfall aqua piston sends water rushing into the system from a full 360 degrees upon actuation harnessing the force of gravity.
Overview
IMPORTANT! Use only KOHLER Genuine Parts to avoid property damage and achieve optimal performance.
Poor Flush
Check the trip lever chain for excessive slack. Remove one or two chain links to remove slack, if needed.
No Flush
Verify that the trip lever chain is attached to the handle. Reconnect the chain to the trip lever or flush valve, if needed.
Water Running Sporadically
Adjust the chain for proper slack so the seal is not held off the flush valve seat.
Why does water run from the toilet tank into the toilet bowl?
Description of Issue: With this issue, water constantly leaks or runs from the toilet tank into the toilet bowl because the trip lever arm may be binding, water may be overflowing into the flush valve overflow, or debris may be lodged underneath the cap of the fill valve.
Why does my toilet keep running?
Leaking or constant running is often caused by sediment or debris lodged in the cap of the fill valve preventing the water from turning off. The fill valve fills the tank and bowl with water after the toilet is flushed. This issue is common during new toilet installation because turning the water supply on and off can loosen sediment within ...
What does the number after the model number mean on a Kohler toilet?
Typically, numbers (or a single letter/number combination like K4 or Y2) after the 4- or 5-digit model number indicate the color code for your toilet.
How many digits are in a toilet tank?
Certain specialty toilets may have a 5-digit number starting with a 1. The number will be either molded into the porcelain or stamped on in blue or black ink. This is your tank number and you can use it to find the parts you need to fix your toilet. Q.
Why does my toilet leak?
Description of issue: With this issue, toilets run or leak because water is leaking out of the tank. This may occur because the trip lever arm may be binding, water may be overflowing into the flush valve overflow tube or the flush valve flapper/canister seal may be worn.
Why does a flush valve wear down?
There are two different types of flush valve styles (Fig. 1) that may wear down over time due to water conditions or from the use of in-tank cleaners. There is an additional flush valve gasket where the flush valve meets the bottom of the tank.
