Night latch cylinder holes can be drilled with a 32mm flatbit Fitting the Cylinder Insert the cylinder through the front plate and onto the door. Fix the mounting plate to the back of the door. The cylinder will fix to the mounting plate with the two long screws provided. These screws are marked as B in the image above Fitting the Backset
How do I replace a cylinder night latch?
If you ever need to change the locks to a house a cylinder night latch is the easies to replace. New cylinders can be bought from our toolstore and by removing the back set from the door and undoing the screws from the mounting plate, the cylinder can be pulled out easily and replaced. Most new cylinders come with two keys when you buy them.
How do you open a night latch door?
The primary latch in a night latch has a rounded leading edge and is spring loaded. The latch is withdrawn into the casing as you turn the inside knob to allow you to open the door, but you can close the door by simply pushing the door into its frame.
How do you fix a door that won't latch shut?
To lower the door and align it with the latch plate, remove a screw from the bottom hinge on the doorjamb and replace it with a 3 inch screw. Test the door and see if it will latch properly. Remove the latch plate screws and the latch plate from the doorjamb. Place the latch plate in a vice.
What is a night latch?
The quick and easy definition of the term night latch function is a spring lock that can be opened from the inside by engaging the lever set or knob from the inside or from the outside by key. Where is it applied? The night latch is mounted onto the surface of the door as opposed to being mortised into the edge of it.
How high should a night latch?
Typically, a night latch mounts on the door 48 inches from the floor. Mark the desired height at the lock side of the door with a pencil.
How does a double locking night latch work?
The double-locking variety Instead of just pulling the door shut behind you, you can turn the key to lock it. This effectively turns the Yale into a sort of deadlock. There's no way to credit-card a double-locked nightlatch, and also you can't unlock it from the inside using the handle.
How do you fix Bird locks?
0:182:20How to change a rim lock cylinder - YouTubeYouTubeStart of suggested clipEnd of suggested clipIf the night latch is fixed to a mounting plate you'll need to remove that to unscrew the twoMoreIf the night latch is fixed to a mounting plate you'll need to remove that to unscrew the two cylinder fixing screws and then gently pull the cylinder out of the front.
How do you unlock a night latch?
Similar to the auto & deadlocking night latch, you can still open the door from inside if you lock the handle from inside with a key. To unlock the door just use the key to unlock unlike the standard deadlocking which you cannot unlock.
Can you lock a night latch from inside?
The definition of a night latch is spring lock that can be opened from the outside with a key only and the inside by turning either a knob or short handle.
How do you put a night latch together?
0:412:05How to install a Night Latch to your door. - YouTubeYouTubeStart of suggested clipEnd of suggested clipCheck that the mark on the lock cam is aligned with the arrow. If not move into position place theMoreCheck that the mark on the lock cam is aligned with the arrow. If not move into position place the night latch body onto the mounting plate ensuring the tail bar of the cylinder.
How do you fix a cylinder lock on a door?
0:461:44DIY - How to Change a Barrel or Cylinder Lock - YouTubeYouTubeStart of suggested clipEnd of suggested clipPosition replace the flat screw into the door jamb to secure the cylinder lock verify that the lockMorePosition replace the flat screw into the door jamb to secure the cylinder lock verify that the lock functions properly by turning the key to the lock and unlock positions.
How do you tighten a loose cylinder lock?
3:005:21Tighten a Loose Cylinder Lock - YouTubeYouTubeStart of suggested clipEnd of suggested clipLet's put our cover plate back on put our little Phillips screws right back in place leave them aMoreLet's put our cover plate back on put our little Phillips screws right back in place leave them a little bit loose at first till we get all three in there and then we come back and just hand tighten.
How do you change a lock cylinder?
Pull on the key to pull the lock cylinder completely out of its casing. If the ignition is sticking, wiggle it back and forth until you free it from its hole. Insert the new lock cylinder and turn it counterclockwise until it clicks. Push your new lock cylinder into the hole and twist it towards you.
How do you reverse a wheel lock latch?
2:125:07Yale Night Latch P89 P85 How to reverse the latch on the rim lock ...YouTubeStart of suggested clipEnd of suggested clipThe strike on that that gets popped back in there. Like that and we then pop the screws back. In.MoreThe strike on that that gets popped back in there. Like that and we then pop the screws back. In. Turn the screwdriver. So it goes the opposite.
Is a night latch secure?
When it comes to security, there is nothing quite like the traditional night latch. A night latch is a lock that is fitted on the internal side of a door and helps to give more sturdiness and security when locked in position. The door is locked from the inside using the lever and unlocked from the outside using a key.
How do you slip a latch?
5:0614:08Slipping latches, bypass. (313) - YouTubeYouTubeStart of suggested clipEnd of suggested clipShims.MoreShims.
Where is the night latch cylinder?
The night latch cylinder is a small cylinder in which the key is inserted at the front of the door. It passes through the hole drilled in the door after being inserted into the securing washer.
What is a Yale night latch?
What is a Night Latch. A cylinder night latch, of which the Yale lock is the most common sort, is an easily fitted lock that locks itself automatically when the door is closed. It is fitted to doors which open inward. The cylinder night latch can only be opened with a key from the outside but can be closed, and locked, ...
What size is a night latch backset?
Night latch backsets can be 40 or 60mm.
How big of a hole do you need to drill for a lock?
Look at the instructions for the diameter of the hole you need to drill in the door to put the lock barrel through. This hole is usually 32mm and a flat wood bit, or an auger bit will be used for this hole but make sure you drill the hole from both sides of the door with a level drill.
Can you reverse Yale night latches?
The spring needs to be removed before the latch can be turned over. Night latches are designed for inward opening doors and while reversing the latch can be done, we do not recommend it. Night latches and Yale locks can be reversed for outward opening doors – Image courtesy of Locksonline.
Can a cylinder night latch be locked?
The cylinder night latch can only be opened with a key from the outside but can be closed, and locked, from the inside using the locking button. It has to be said that the cylinder night latch is not the most secure of lock and is one of the most easily forced. Its “grown up”, more secure partner is the cylinder rim lock with a deadlock.
What is a night latch?
The night latch holds the door closed with a latch which can often be deadlocked into position. The latch’s screw prevents the cam on the mortise cylinder from turning far enough to allow the key to be released from the core (or plug) while the handle is locked.
What is the primary latch on a night latch?
The primary latch in a night latch has a rounded leading edge and is spring loaded. The latch is withdrawn into the casing as you turn the inside knob to allow you to open the door, but you can close the door by simply pushing the door into its frame. These locks always need a key to unlock them from the outside.
How to latch a baby when it is too shallow?
If the latch is shallow, unlatch, then attempt to latch again aiming nipple toward baby's nose, rather than straight into their mouth. Bring baby’s chin and lower lip into contact with the breast first.”.
How long can you wear a baby latch?
They’re super cheap, can be worn for multiple days (perfect when you’re trying to get a good latch), and are soooo soothing. Skin-to-skin and certain positions promote the baby’s innate ability to latch.
How to help a baby bird with a deep latch?
Visualize a hungry baby bird! “To help encourage a deep latch, make sure baby’s mouth is opened wide. Visualize a hungry baby bird! Gently touch your nipple to baby’s mouth to trigger the response. At the widest point, quickly bring baby to breast and latch with as much in the mouth as possible. Try again if necessary.”.
HandyHands
Use a screwdriver to manually lift the snib mechanism through the slot.
HandyHands
The screws holding the cover in place are facing the keep - so no chance of taking it apart. It looks like a destructive approach to remove it, but I'd try a set of mole grips on the knob first and use brute force to turn it.
masona
Try levering the door up slightly with a flat crowbar or wide chisel then open it at the same time. I think the door is dropping therefore the latch resting on the plate
JohnD
if you can lay your hands on an angle grinder, cut the case. A drill or hacksaw would do it slower.
lanedriver
If the plastic slider is still in place just use a small allan key in the hole and slide the mechanism up or down depending if it is fitted L/R handed. If the slider has dropped inside then use the allan key and a pair of molegrips.
foxhole
If the plastic slider is still in place just use a small allan key in the hole and slide the mechanism up or down depending if it is fitted L/R handed. If the slider has dropped inside then use the allan key and a pair of molegrips.
DIYnot Local
If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.
Why do I need to shim a door latch?
With a door latch stuck closed and cannot be shimmed because of latch guards or because the components are frozen, you will need to simply take the lock off the door.
Why is my door latch stuck?
The most common reasons for a stuck door latch are: Door Alignment . Jammed Latch. Broken Internals. It is important to get to the root of this problem, and find a solution for your stuck door latch because this is certainly a lock issue that you should not ignore.
Can you replace a broken lock?
The better you can diagnose the issue, the easier it is to replace the broken part of the lock. When a lock is too broken to fix, or totaled (meaning the price to fix is greater than buying a new lock), this can be the perfect opportunity to upgrade your security.
How to move a door latch?
Cover the latch plate with masking tape. Rub colored chalk on the outer edge of the door latch. Shut the door and then open it . Inspect the tape to see where the chalk covered door latch hit the tape. This will help you determine distance that the latch plate needs to move.
How to lower a door and align it with the latch plate?
To lower the door and align it with the latch plate, remove a screw from the bottom hinge on the doorjamb and replace it with a 3 inch screw. Test the door and see if it will latch properly. Remove the latch plate screws and the latch plate from the doorjamb. Place the latch plate in a vice.
How far does a latch hole need to be to move?
This is the distance that the latch plate hole needs to move. If the distance is less than 1/8 inch, you can resolve the latch problem by making the latch plate hole larger with a half-round file. To raise the door and align the latch with the latch plate hole, remove a screw from the top hinge on the doorjamb.
Why won't my screen door latch?
This may be caused by the latch plates shifting over time, due to thermal expansion ; or because the latch plate was installed misaligned with the door latch. Fortunately, you do not have ...
How to fix a screen door that won't close?
Tighten the screws on all of the hinges with a screwdriver. Test the door, as sometimes a loose hinge can cause the screen door latch to not shut properly, says Bob Vila. Cover the latch plate with masking tape. Rub colored chalk on the outer edge of the door latch. Shut the door and then open it.