Making Common Repairs Download Article
- 1 Turn off the power supply. Make sure your washing machine's power supply is off before you try to make any repairs. ...
- 2 Check and repair the supply hoses. These are located at the back of the machine, and they feed water into the machine during the wash cycle. ...
- 3 Check and repair the internal hoses. ...
- 4 Determine if the pump is leaky. ...
Full Answer
How to replace the pump in a washing machine?
Uninstall the Old Drain Pump
- Release Drain Hose Spring Clamp with Pliers. Look underneath the washer and you will see several exposed components. ...
- Remove Drain Hose. Now the drain hose is loose and can be pulled off the end of the drain pump. ...
- Open Wire Harness Compartment. ...
- Disconnect Wires. ...
- Remove Mounting Bolts. ...
- Extract and Discard Old Drain Pump. ...
How to diagnose washing machine drain and pump problems?
- Check that the drain line is clear
- Check the drain hose for kinks or blockages
- Check pump for blockages
- Check for build up of soap in the outer tub
- Check for article of clothing stuck in the outer tub
How hard is it to plumb a washing machine in?
Plumbing in a washing machine is a fairly easy task to accomplish. If the installation site is already plumbed with the water feeds and waste pipe outlet, then it can be done in no time at all. Please note: We will accept no responsibility for any damage or injury as a result of following this guide.
How to repair a washing machine that is leaking water?
- An overloaded or unbalanced washer. If you're trying to load up the washer with too many clothes, that can cause water to leak out. ...
- A tendency to interrupt the rinse cycle to add more time. ...
- Make sure the manufacturer's drain plug is removed. ...
- Make sure the drain hose is properly secured in the drainpipe. ...
- Make sure the drain isn't clogged. ...
Can you fix a pump on a washing machine?
A leaking water line or washer that doesn't drain may seem to be on its way out, but the part responsible for these processes, the water pump, is actually quite easy to fix or even replace on your own.
How do I know if my washing machine pump is clogged?
1:564:23How to Diagnose Washing Machine Drain and Pump Problems - YouTubeYouTubeStart of suggested clipEnd of suggested clipIf the noises are happening during the drainage. Then that could be an issue with the drainage pump.MoreIf the noises are happening during the drainage. Then that could be an issue with the drainage pump. If you've checked all of these areas for blockages.
What causes a pump to go out on a washing machine?
Sometimes a piece of wash will obstruct the impeller to work correctly. Sometimes a damaged impeller or a defective seal can cause a mechanical failure in the pump. Additionally, if the pump operates with its own motor, it could experience electronic failure.
How do you fix a clogged drain pump?
0:201:59How to resolve washing machine drain and pump problems - YouTubeYouTubeStart of suggested clipEnd of suggested clipAnd drain the water you'll want to make sure all the water is drained out before opening the filterMoreAnd drain the water you'll want to make sure all the water is drained out before opening the filter cover fully. Because there may be quite a lot.
How do you unclog a washing machine pump?
2:113:17Washer Repair: How to Unclog the Drain Pump - YouTubeYouTubeStart of suggested clipEnd of suggested clipChoose a flat blade screwdriver release the spring clips you can slide the pump. Completely off andMoreChoose a flat blade screwdriver release the spring clips you can slide the pump. Completely off and access it or remove it completely.
How much does it cost to replace a washing machine pump?
Washing Machine Pump Cost The price of a new washing machine pump is $25 to $40 on its own, not including labor. When hiring a professional, repair prices range from $200 to $450.
How do you test a washing machine water pump?
Unscrew the screws with a Phillips screwdriver, and remove the panel by tilting it out while you lift it to unhook the top of the panel from the machine. You should see the drain pump attached to the bottom panel. It is connected to the drain hose.
How long does a washing machine drain pump last?
How Long Do Washing Machine Pumps Last? Depending on the drain pump quality, you can expect it to last anywhere from 3 to 5 years. However, it's not uncommon for drain pumps and other washer components to last upwards of 10 years.
Why is my washer not draining or spinning?
If your washer won't drain or spin, the water level control may be faulty. Open the machine's control panel and look for a plastic tube attached to the water level valve. If it's clogged, clear it out with vinegar. If the valve itself is corroded, it may need to be replaced.
What causes a washing machine not to drain and spin?
If the washer won't drain or spin, either something is stuck in the washing machine drain hose or pump, or the pump is broken.
Where is the pump located on a washing machine?
The pump is situated at the bottom of the washing machine and is used to pump the water from the wash, into the drain hose, to be drained away. If your washing machine is failing to drain during a wash cycle, it could be that there is a problem with the drain pump.
Why is my washer just humming?
Carbon brushes in the motor: If you switch on the machine and it makes a humming sound as though it is working but the drum does not turn, then the most common explanation is worn out carbon brushes in the motor. The brushes (located on both sides of the motor) are inexpensive to replace.
What causes washing machine not to drain water?
A washing machine not draining can have multiple causes, including a clogged or jammed drain hose or a broken pump, lid switch, or belt. No matter the culprit, you need to drain the water from the washing machine before diagnosing the issue or doing any work to remedy the situation.
What causes a washing machine not to drain and spin?
If the washer won't drain or spin, either something is stuck in the washing machine drain hose or pump, or the pump is broken.
How long does a washing machine drain pump last?
How Long Do Washing Machine Pumps Last? Depending on the drain pump quality, you can expect it to last anywhere from 3 to 5 years. However, it's not uncommon for drain pumps and other washer components to last upwards of 10 years.
What would make a washing machine not drain water?
What to Do When Your Washing Machine Won't DrainPerform a Master Reset. Unplug your washer for about one minute. ... Test the Lid Switch Assembly. ... See if the Drain Hose is Kinked. ... Check the Drain Hose or Pump for Clogs. ... Clean out the Coin Trap. ... Check the Water Level Control. ... Schedule Washing Machine Repair.
How to check if your washer is getting power?
Power. The first thing to check is if your washing machine is getting power. Using a multimeter check the outlet voltage. If there isn't electricity flowing into your washer you'll need to check your household electrical panel to see if any circuit breakers may have been tripped.
Why does my washing machine stop working?
Washing machines are designed to stop working when the lid is open. The lid switch is a small plastic piece located under the lid. In order for the switch to activate, the lid must be shut. Check to see if the switch is in good repair and properly positioned.
Why isn't my washer draining?
Many times a clogged drain hose is the reason your washer isn't draining properly. Remove the hose and visually inspect it for clogs. A garden hose can be used to flush any stubborn blockages from the hose.
How to clean an automatic detergent dispenser?
The dispenser needs to be cleaned - Clean the dispenser monthly with a cup of warm distilled white vinegar. Pour the vinegar into the dispenser and run the washer thru a regular cycle.
Why does my washer shut down?
If the washer's motor overheated the washer will shut down to allow it to cool before you can start it again. If this happens once or twice it may not be a problem, but if your motor frequently overheats it's critical to find out what is actually causing this to happen.
Why is my washing machine unbalanced?
A washing machine will become unbalanced if there are too many clothes being washed in the same load. An overloaded machine will become unbalanced and not properly spin. This can also occur if the clothes are not evenly distributed within the basket.
What happens if you put pens in the washer?
If items such as socks, pens and coins get wedged between the basket and the tub, or become lodged in the pump, the washer's ability to drain properly will be greatly reduced and even can come to a full stop. You'll need to open the cabinet to gain access so that you can search for any obstructions.
Why is my washing machine leaking on the floor?
If your washing machine is leaking on the floor, you'll definitely want to find the problem fast. If it only leaks during the spin cycle, it's likely from the drain hose. Check for loose hose connections, the condition of the hose (cracks or damage), a clog or obstruction, and the connection to the washer.
Why won't my washer turn on?
Washer Won't Turn On. While this may seem like common sense, if your washer doesn't respond when you turn it on, make sure the power source is connected. A cord may have accidentally been unplugged or the circuit breaker may have been tripped on. If power is getting to the machine, your motor may have overheated.
What does it mean when your washer makes a clicking noise?
A clicking noise, on the other hand, could indicate something lodged in the washer drain. Sometimes coins or other objects left in a pocket will come loose and get stuck there. Thus, be sure to check the drain and remove anything that doesn't belong.
How to check if a washer is alternating or no continuity?
Use a multimeter to test alternating continuity and no continuity by touching the probes to the switch's connectors. If you don't see this reading, replace the switch altogether. A worn or broken belt can prevent the washer from spinning or agitating, so you’ll need to replace any damaged belts with new ones.
Why is my pump jammed?
If you're hearing a buzzing or humming noise , you'll want to check your pump. Once again, loose objects can make their way to the pump and cause it to jam. Serious damage to the pump may require a pump replacement.
Why does my sandpaper machine start right up?
If power is getting to the machine, your motor may have overheated. This is a safety feature and once it has cooled down, it will start right up again. If this happens frequently, you may need a professional assessment to find out the cause. Check the lid switch to be sure it is positioned properly and seating right.
Why is my front load washer leaking?
If you've got a front-load washer, the door seal may be leaking. It's a common area for dirt build-up, and water can seep out. You should clean the seal carefully to eliminate this problem.
How to fix water on floor in washer?
But if you’re noticing some water appearing on the floor, it may be a simple fix. Try cleaning the door seal, tightening hose connections and cleaning the drain pump filter.
What to do if your washer spins but doesn't spin?
In this case, turn on a spin cycle or drain and spin cycle to get rid of the remaining water.
How high should a drain pipe be on a Maytag washer?
For most Maytag ® washers, the drainpipe should be installed at a maximum of 96" and a minimum of 39" from the bottom of the machine . Your washer will not be able to adequately pump water out of the washer if the drainpipe reaches too high. In this case, water may flow back into the washer. Consult your washer's installation instructions for model-specific installation requirements or watch this video on proper drain hose and drainpipe installation for Maytag ® washers.
Why do washers spin?
A washer needs to spin correctly in order to fully rinse clothes and drain water from the tub. Before scheduling a service call, check if the power has gone out, that your load is balanced and that the washer is level.
How to contact Maytag for repair?
If you need professional repair help, schedule service online or call 1-800-344-1274.
Why does my washer make a hum?
It’s normal to hear the pump or motor make a continuous humming sound while loads are washing, along with periodic gurgling or surging as water is removed during the spin or drain cycles . You may also hear the hum of the sensing spins after you have started the washer.
Why does my washer make a clicking noise?
Many washer lids make clicking noises while they’re locking in place at the beginning of a cycle. It’s also normal to hear metal items on clothing like buckles or zippers touch against the stainless steel basket. Always empty your pockets before putting clothes in the washer—it’s possible for coins or other items to fall between the basket and the tub, which may require a service call.
Why is my washing machine pump not working?
As mentioned earlier, the washing machine water pump may develop issues due to the following: faulty filter, burnt-out motor, and a blocked drain.
What causes a washing machine water pump to go bad?
There are three main causes of a bad water pump: faulty filter, burnt-out motor, and a blocked drain. There is a need to confirm and identify the origin of the issue to enable the water pump repair.
What type of pump does a washing machine have?
Washing machines are usually equipped with two types of pump, recirculation pump and drainage pump.
Why does my washer water come up to the door?
If the water comes up to the door, it is a sign that the water pump of your washing machine is malfunctioning. Continue to observe as the washer completes its cycle.
How to calibrate ohmmeter on washing machine?
Unplug the washing machine from the electrical outlet. Calibrate your ohmmeter by connecting the probes. Locate the two wires connected to the side of the water pump and remove them from the terminals. Do this gently to avoid the breakage of the wire. Connect each ohmmeter probe to a terminal and check the readings.
What happens if a pump doesn't move?
If it doesn’t move freely, a foreign object is stuck in the pump housing, affecting its function. Locate and remove the foreign object (s). If the pump flywheel moves freely, insert a finger into the drain outlet and feel for broken impeller (s).
How to tell if a pump impeller is broken?
If the pump flywheel moves freely, insert a finger into the drain outlet and feel for broken impeller (s). The broken pieces of the impeller would probably be at the bottom of the pump housing. Remove the fractured pieces and any other obstructive material you feel.
What is the problem with washing machines?
One common problem associated with washing machines is that the machine's basin or tub fills with water but the central agitator does not move. Agitation is the back and forth motion that cleans the clothing. This action is performed by the central plastic cone-shaped device called the agitator.
Why does my washing machine shake when it is running?
This may be pronounced if you have a high-efficiency machine, which has a faster spin cycle than top-loading machines. Walking machines are very dangerous because they can become detached from the water lines or the drainage line, or they might strain at the power cord and cause an electrical fire.
Why does my washer move?
Check the power cord behind the washer to make sure that it is plugged in. Due to washers' vigorous movements, especially when the load is imbalanced, machines may move. When a machine moves, it may inadvertently unplug the power cord.
What does it mean when a washer is spinning at a high rate of speed?
Spinning at a high rate of speed is the action that squeezes water out of the clothing so that it can be dried in the dryer. Try to redistribute the clothing within the washing machine tub. When the washer is out of balance, it will automatically stop until you can get the clothing back in balance.
Why does my washing machine make a squeaky sound?
If the washing machine is making a squeaking sound, the tub bearings may need lubrication. The washing machine motor drive belt or pulley may be worn out. This is a rather involved repair, where you need to take apart a significant section of the machine to get to the motor.
What part of the door should seat into the bottom of the machine?
Close the lid and watch as the part on the door connects with the part on the machine. The top part should seat into the bottom part.
Can you tilt a washing machine?
Always unplug your washing machine before working on it, no matter how minor the repairs may seem to be. Washing machines are heavy and can tip over. So, do not tilt the machine or move without help.
