The steps to fix the LED lights on your Whirlpool refrigerator are:
- Check that the door hasn’t been open for a long time
- Inspect the door switch that controls the LED light
- Double check the wiring harness is connected
- Power cycle your Whirlpool refrigerator
- Get a replacement LED light.
Full Answer
How to change the light bulb on a whirlpool refrigerator?
How to Replace the Refrigerator Light In Your Whirlpool Fridge
- Unplug the Fridge. Your first step for any electrical repair is to unplug the appliance. ...
- Locate the Bulb. The fridge light is located in the center or front-center of the top of your fridge. ...
- Remove the Housing Screws. ...
- Pull Back the Light Cover. ...
- Unscrew Throw Away the Old Bulb. ...
- Install the New Fridge Bulb. ...
- Replace the Cover & Screws. ...
- Plug Fridge Back In. ...
How to replace Whirlpool freezer light bulbs?
How do I change the lightbulb in my Whirlpool freezer?
- Unplug refrigerator or disconnect power.
- Remove light shield when applicable.
- Remove light bulb and replace with one of the same size, shape and wattage.
- Replace light shield when applicable.
- Plug in refrigerator or reconnect power.
How to recharge a whirlpool refrigerator?
How to Recharge Home Refrigerators
- Remove all perishable foods from inside the refrigerator. Unplug the refrigerator and, if possible, move it to the center of the room.
- Locate the refrigerator's compressor. This is a cylindrical black component typically found at the bottom of the refrigerator.
- Open the compressor's intake valve and attach your vacuum pump to the opened valve.
How to fix a whirlpool refrigerator not cooling?
- Locate the Condenser coils – On most refrigerators, they’re behind the rear access panel, at the bottom of the refrigerator door. ...
- Unplug the Whirlpool Refrigerator.
- Carefully remove the fridge panel or grille to access the coils.
- Clean the coils and the area around them gently, using a vacuum hose attachment.
What to do when Whirlpool refrigerator light goes out?
How to fix a fridge light?
How to test Whirlpool refrigerator light?
What happens if an old light bulb is yellow?
How to get power back to fridge after a repair?
Where is the light on a Whirlpool fridge?
Can a fridge be shorted?
See 2 more
What to do when Whirlpool refrigerator light goes out?
So when your Whirlpool refrigerator light goes out, replacing it is a necessary maintenance task you want to take care of quickly. Fortunately, this is a fairly easy fix that does not take a professional to perform if your fridge is in good shape.
How to fix a fridge light?
Step 1: Unplug the Fridge. Your first step for any electrical repair is to unplug the appliance. While changing your fridge light, you may need to come in contact with exposed wires. This means the best way to ensure your safety is to cut the power to your fridge during the repair. Make sure that the fridge cannot short or electrocute by any means.
How to test Whirlpool refrigerator light?
Finally, you’re ready to test your fridge light. With the refrigerator plugged back in, open and close the fridge door to ensure the light comes on. Consider pressing the door latch for a more direct test. If all has gone according to plan, you should now have a brilliantly shining new Whirlpool refrigerator light. Open and close the door and/or press the button several times to be sure the circuit is working correctly.
What happens if an old light bulb is yellow?
If the bulb is yellowed or looks a little charred, you should keep an eye on the next bulb in case there is a power issue with your fridge light socket. You can now throw away the old bulb, as it is of no further use.
How to get power back to fridge after a repair?
Never forget to plug your refrigerator back in after a repair or maintenance service. If you flipped the breaker, then flip your breaker back to the ‘on’ position to restore power to your fridge.
Where is the light on a Whirlpool fridge?
The fridge light is located in the center or front-center of the top of your fridge. You will need to pop open the light cover in order to replace the bulb. Take a close look at the housing to determine its manner of opening. Not all Whirlpool fridges are the same. Many can be opened by depressing plastic locking tabs.
Can a fridge be shorted?
Make sure that the fridge cannot short or electrocute by any means. The two approved ways to cut the power is to pull the plug from the wall and to flip the breaker that powers your fridge. If you can’t reach the fridge plug, the breaker maybe your best option.
How to tell if a door switch is defective?
To determine if the door switch is defective, use a multimeter to test it for continuity. If the door switch does not have continuity when activated, replace it.
How to tell if a light socket is defective?
To determine if the light socket is defective, use a multimeter to determine if the socket is getting power. If the socket is getting power, but the light bulb won’t work, this indicates that the light socket is defective. If the light socket is defective, replace it. Required Part. Refrigerator Light Socket.
Can you sell refrigerator light assembly separately?
The light assembly might be defective. Some manufacturers don’t sell the light assembly components separately , and instead require you to purchase the light assembly. Required Part. Refrigerator Light Assembly. Enter model number to search for the required part specific to your product.
What to do when Whirlpool refrigerator light goes out?
So when your Whirlpool refrigerator light goes out, replacing it is a necessary maintenance task you want to take care of quickly. Fortunately, this is a fairly easy fix that does not take a professional to perform if your fridge is in good shape.
How to fix a fridge light?
Step 1: Unplug the Fridge. Your first step for any electrical repair is to unplug the appliance. While changing your fridge light, you may need to come in contact with exposed wires. This means the best way to ensure your safety is to cut the power to your fridge during the repair. Make sure that the fridge cannot short or electrocute by any means.
How to test Whirlpool refrigerator light?
Finally, you’re ready to test your fridge light. With the refrigerator plugged back in, open and close the fridge door to ensure the light comes on. Consider pressing the door latch for a more direct test. If all has gone according to plan, you should now have a brilliantly shining new Whirlpool refrigerator light. Open and close the door and/or press the button several times to be sure the circuit is working correctly.
What happens if an old light bulb is yellow?
If the bulb is yellowed or looks a little charred, you should keep an eye on the next bulb in case there is a power issue with your fridge light socket. You can now throw away the old bulb, as it is of no further use.
How to get power back to fridge after a repair?
Never forget to plug your refrigerator back in after a repair or maintenance service. If you flipped the breaker, then flip your breaker back to the ‘on’ position to restore power to your fridge.
Where is the light on a Whirlpool fridge?
The fridge light is located in the center or front-center of the top of your fridge. You will need to pop open the light cover in order to replace the bulb. Take a close look at the housing to determine its manner of opening. Not all Whirlpool fridges are the same. Many can be opened by depressing plastic locking tabs.
Can a fridge be shorted?
Make sure that the fridge cannot short or electrocute by any means. The two approved ways to cut the power is to pull the plug from the wall and to flip the breaker that powers your fridge. If you can’t reach the fridge plug, the breaker maybe your best option.
